Skip to contentSkip to conversation

broken(?) Lucent Venus chipset and Linux 2.4

DISCUSSION W. Michael Petullo 2 participants 2 messages Mar 9, 2001 – Mar 11, 2001

lore
Share & tools
lore
#0 lore raw

I have a Lucent Microelectronics Venus based modem, the Actiontec Internal Call Waiting modem. I have been trying to get it working well with Linux 2.4 for some time now. Theodore Ts'o, the maintainer of the Linux serial driver, and I have talked quite a bit on the subject. We both suspect that the Venus chipset is broken.

I have some code available at http://www.flyn.org related to this issue. First, I have an ugly patch that adds support for the Actiontec Internal Call Waiting modem to Theodore's serial driver version 5.05. Second, I have a simple kernel module that seems to demonstrate that the Venus chipset has something wrong with it. The module code should be self explanatory. To summarize, writing a value, call it foo, to, for example, the modem's interrupt enable register and then immediately reading the register's value does not always return foo.

If you have or have access to a Linux box with a Venus-based modem, answering any of these questions would be very helpful:

o Does your modem work flawlessly with Linux 2.4?

o Could you run my test kernel module? If so, what are the results on your computer?

I have been lobbying both Lucent and Actiontec to help me with this issue. Up to this point neither has provided substantial help. However, there is promise and I am not ready to give up yet.

Thanks!

Signature · 3 lines
W. Michael Petullo

:wq
#1 lore raw
Quoted 3 lines · W. Michael Petullo

If you have or have access to a Linux box with a Venus-based modem, answering any of these questions would be very helpful:

Well, I'm not absolutely sure if we are talking about the same thing: what I have is a re-labeled PC-Card modem which identifies according to

cardctl ident:
product info: "LUCENT-VENUS", "PCMCIA 56K DataFax"
manfid: 0x0200, 0x0001
function: 2 (serial)

ATI:
Venus K56FLEX V.90 kfav163 PCMCIA p52198

Quoted 1 line

o Does your modem work flawlessly with Linux 2.4?

Yes, for me it does - with the standard serial.c driver (and PCMCIA's serial_cs of course) under Linux 2.0/2.2/2.4.

HTH.
Martin