redhat 7.0
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Pete
Quoted 7 lines · On Sun, Feb 18, 2001 at 10:58:07AM -0800, [email protected] wrote:
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.
Quoted 2 lines
Pete
Best regards,
Dave
Signature · 5 lines
------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: [email protected] PGP key: finger [email protected] ---------=[ ~EOF ]=------------------------------------
Quoted 9 lines · David Jez
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.
Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
Ralf
Quoted 9 lines · Ralf Baechle
Quoted 6 lines · David Jez
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Quoted 6 lines
Quoted 3 lines
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
I tried that; "rpm --rebuilddb" failed because it couldn't find some library. I'll try again.
Pete
Linux on Origin 200 (newbie)
Hello,
I'm an absolutely MIPS newbie and before screwing up anything, I wanted to ask if ever someone tried to install Linux on a Origin 200 Machine?
Chris
Re: Linux on Origin 200 (newbie)
Quoted 11 lines
From: [email protected]
Date: Tue, 20 Feb 2001 16:57:56 -0800
Subject: Linux on Origin 200 (newbie)Hello,
I'm an absolutely MIPS newbie and before screwing up anything, I wanted to ask if ever someone tried to install Linux on a Origin 200 Machine?
Chris
See the howto at http://oss.sgi.com/mips/mips-howto.html. :-)
Mike McDonald
[email protected]
Re: Linux on Origin 200 (newbie)
In reply to [email protected]Yes. It may or may not work . It does not work on my O200.
Nick
Quoted 7 lines · On Tue, 20 Feb 2001 [email protected] wrote:
Hello,
I'm an absolutely MIPS newbie and before screwing up anything, I wanted to ask if ever someone tried to install Linux on a Origin 200 Machine?
Chris
Re: Linux on Origin 200 (newbie)
Quoted 1 line · On Tue, Feb 20, 2001 at 08:08:03PM -0500, [email protected] wrote:
Yes. It may or may not work . It does not work on my O200.
Latest theory is that we have a problem which is related to different versions of various chips of the system. When it's actually running on an Origin 200 / 2000 then it's also very reliable.
Aside of that the current list of open bugs for the Origin 200 / 2000 is:
- we don't have FPU emulation code
- the performance of the ioc3-eth driver is weak to say the least
- ioc3-eth doesn't handle autonegotiation correctly
- the binary compatibility code for running 32-bit apps is less than perfect.
- we crash on systems with more than 64 processors. Yes dudes, that's tested on real world hardware :-)
Ralf
Quoted 5 lines · Pete Popov
Quoted 2 lines
Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
I tried that; "rpm --rebuilddb" failed because it couldn't find some library. I'll try again.
Hmm... I know I went through the procedure when I upgraded posix0 from 5.1 to 7.0, so it's definately to get to work even though it definately was hairy beyond Joe Average Sysadmin's skills. Maybe you'll also have to dump a copy of glibc into the to-be updates system or use the --root option. Somebody will have to figure out a reasonably easy to follow and safe procedure here.
Ralf
Hi Pete
Did you managed to get through the installation of the RedHat 7.0 packages ? I would like to do something similar.
/Carsten
Quoted 14 lines · Pete Popov
Quoted 13 lines · Ralf Baechle
Quoted 9 lines · David Jez
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.
Quoted 7 lines
Quoted 2 lines
Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
I tried that; "rpm --rebuilddb" failed because it couldn't find some library. I'll try again.
Pete
--
_ _ ____ ___ Carsten Langgaard Mailto:[email protected] |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com
Quoted 5 lines · Carsten Langgaard
Hi Pete
Did you managed to get through the installation of the RedHat 7.0 packages ? I would like to do something similar.
I haven't had time to try again. I tried the debian 2_2 tar ball, went through the partitioning and dvhtool exersize and managed to setup all of that. If I try RedHat 7.0 again and manage to install it before someone else does, I'll send instructions.
Pete
Quoted 30 lines
Quoted 14 lines · Pete Popov
Quoted 13 lines · Ralf Baechle
Quoted 9 lines · David Jez
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.Quoted 7 lines
Quoted 2 lines
Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
I tried that; "rpm --rebuilddb" failed because it couldn't find some library. I'll try again.
Pete
--
_ _ ____ ___ Carsten Langgaard Mailto:[email protected] |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com
Please Ralf, could you help me here.
I did the same as Pete describe below, and I got the same result.
When I tried "rpm --rebuilddb" it fails because it couldn't find some libraries. The rpm-tarball contains a statically linked rpm binary, but rpmdb is dynamically linked, could you please provide me with a statically linked rpmdb binary, that would be great.
/Carsten
Quoted 7 lines · [email protected] wrote:
Quoted 5 lines · Carsten Langgaard
Hi Pete
Did you managed to get through the installation of the RedHat 7.0 packages ? I would like to do something similar.
Quoted 37 lines
I haven't had time to try again. I tried the debian 2_2 tar ball, went through the partitioning and dvhtool exersize and managed to setup all of that. If I try RedHat 7.0 again and manage to install it before someone else does, I'll send instructions.
Pete
Quoted 30 lines
Quoted 14 lines · Pete Popov
Quoted 13 lines · Ralf Baechle
Quoted 9 lines · David Jez
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.Quoted 7 lines
Quoted 2 lines
Oss has a tarball with statically linked rpm 4 binaries. Use that to convert your rpm database and then install the rpm 4 rpm package for real.
I tried that; "rpm --rebuilddb" failed because it couldn't find some library. I'll try again.
Pete
--
_ _ ____ ___ Carsten Langgaard Mailto:[email protected] |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556Denmark http://www.mips.com
--
_ _ ____ ___ Carsten Langgaard Mailto:[email protected] |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com
Hi Carsten,
try this:
1. install package rpm-3.0.5 from last rh-6.2 updates
2. then install package rpm-4.0.4
this may will be OK, because rpm-3.0.5 know rpm-4 packages format.
Try read this, but I'm afraid you will not understand:
http://www.linux.cz/lists/archive/linux/101281.html
good luck
Dave
Quoted 17 lines
Please Ralf, could you help me here.
I did the same as Pete describe below, and I got the same result.
When I tried "rpm --rebuilddb" it fails because it couldn't find some libraries. The rpm-tarball contains a statically linked rpm binary, but rpmdb is dynamically linked, could you please provide me with a statically linked rpmdb binary, that would be great.Quoted 11 lines
Quoted 11 lines
Did you managed to get through the installation of the RedHat 7.0 packages ? I would like to do something similar.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm running into is that after I netboot and mount simple-0.2b as the root fs, and install the rpm-4.0 tarball, rpm doesn't work with the libraries, or lack of, of that root fs. It looks like I need an fs with a working rpm-4.0, so that I can mount my second disk somewhere and install the 7.0 packages. Any suggestions?
Yes,
If you download rpm-3.0 (I'm not sure, try get newer version) you'll should be able to work with rpm 4 packages.
Signature · 5 lines
------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: [email protected] PGP key: finger [email protected] ---------=[ ~EOF ]=------------------------------------