Skip to contentSkip to conversation

Drvie Corruption CONSTANTLY with Linux and KT7-RAID

DISCUSSION Peter DeVries 3 participants 3 messages Mar 15, 2001

lore
Share & tools
lore
#0 lore raw

Please help.. I'm at the end of my rope with this now.
I have rebuilt this system and corupted my drive at
least 30 times now. I have a ABIT KT7-RAID and no matter what I do with any kernel 2.2.16 - 2.4.2-ac19 as soon as I turn on DMA mode the drive starts to corrupt and becomes useless. The corruption happens alot faster in 2.4xxx than the 2.2.xxx kernels.

The system DOES work flawlessly running windows in DMA mode, which leads me to believe that I am not experiencing a Hardware problem.

I have tried every suggestion concerning the via chipset on this site. I've heard of many success stories with this board. what am i doing wrong?!?!

At this point I am 100% lost. any help would be greatly appreciated. I am willing to do any testing of the system that anyone may need. Currently I have no working copy of linux on the sytem. My normal process to get running is to install slackware. download 2.4.2 and the latest ac patch. Compile, add ide=reverse to lilo, switch the hd over to the highpoint hpt366 controller and reboot. As soon as I boot corruption begins and drive will be useless within 10 minutes. I have also tried leaving the HD on the VIA82686a controller witht the same results. Also note I have tried IBM & MAXTOR UDMA100 drives as well as IBM & WD UDMA66 Drives. I have tried both 40 & 80 pin cables on the drives.

Please cc me in your replies as I am not subscribed to the list.

Thank you in advance for any help

#1 lore raw
Quoted 6 lines

At this point I am 100% lost. any help would be greatly appreciated. I am willing to do any testing of the system that anyone may need. Currently I have no working copy of linux on the sytem. My normal process to get running is to install slackware. download 2.4.2 and the latest ac patch. Compile, add

Quoted 8 lines

ide=reverse to lilo, switch the hd over to the highpoint hpt366 controller and reboot. As soon as I boot corruption begins and drive will be useless within 10 minutes. I have also tried leaving the HD on the VIA82686a controller witht the same results. Also note I have tried IBM & MAXTOR UDMA100 drives as well as IBM & WD UDMA66 Drives. I have tried both 40 & 80 pin cables on the drives.

I suggest using the 82686-based controller rather than the HPT one. Also, try running with DMA mode disabled. Personally, I'm running fine with the 82686-based controller in DMA mode with a Seagate UDMA/66 drive. You might also want to look at the BIOS settings, which Windows drivers might "adjust" at runtime to saner values.

--------------------------------------------------------------

from:     Jonathan "Chromatix" Morton
mail:     [email protected]  (not for attachments)
big-mail: [email protected]
uni-mail: [email protected]

The key to knowledge is not to rely on people to teach you it.

Get VNC Server for Macintosh from http://www.chromatix.uklinux.net/vnc/

-----BEGIN GEEK CODE BLOCK-----
Version 3.12
GCS$/E/S dpu(!) s:- a20 C+++ UL++ P L+++ E W+ N- o? K? w--- O-- M++$ V? PS PE- Y+ PGP++ t- 5- X- R !tv b++ DI+++ D G e+ h+ r++ y+(*) -----END GEEK CODE BLOCK-----

#2 lore raw
In reply to Peter DeVries
Quoted 7 lines · Peter DeVries

Please help.. I'm at the end of my rope with this now.
I have rebuilt this system and corupted my drive at
least 30 times now. I have a ABIT KT7-RAID and no matter what I do with any kernel 2.2.16 - 2.4.2-ac19 as soon as I turn on DMA mode the drive starts to corrupt and becomes useless. The corruption happens alot faster in 2.4xxx than the 2.2.xxx kernels.

Do you notice any programs getting SEGVs? If they do, it could be bad RAM.

Personally, when I come across a machine which behaves oddly, the first thing I'd try is checking the memory. You can get a copy of memtest86 for doing this.

--
Russell King ([email protected]) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html