switch_to()/doesnt %esp get replaced with %ebp on ret
in schedule(), switch_to() macro changes esp to the new process's stack. But, on exit frm schedule, how come it does not get overwritten with ebp-24, as the dissasembled code shows. The code was compiled without the -fomit-frame-pointer.
pushl 508(%ecx)
jmp __switch_to
1: popl %ebp
popl %edi
popl %esi
jmp .L1180.L1180:
leal -24(%ebp),%esp
popl %ebx
popl %esi
popl %edi
movl %ebp,%esp
popl %ebp
retThat's not nice code from the compiler (suboptimal), but it'll work. leal -24(%ebp),%esp is perfectly ok in the epilogue of a function. You're right that %esp is lost -- in this case, %ebp has effectively the same information.
Think like this: a perfectly normal function (without switch_to) can have this:
f: pushl %ebp
movl %esp,%ebp
pushl %ebx
... do stuff, decrement %esp a lot to call functions etc. etc. ... movl -4(%ebp),%esp
popl %ebx
popl %ebp
ret
Quoted 22 lines · Parity Error
in
schedule(),switch_to()macro changes esp to the new process's stack. But, on exit frm schedule, how come it does not get overwritten with ebp-24, as the dissasembled code shows. The code was compiled without the -fomit-frame-pointer.pushl 508(%ecx) jmp __switch_to 1: popl %ebp popl %edi popl %esi jmp .L1180.L1180:
leal -24(%ebp),%esp popl %ebx popl %esi popl %edi movl %ebp,%esp popl %ebp ret
I dont know if you understood my doubt, but your pointer to bp accidentally or otherwise solved the mystery.
The problem was although switch_to changes esp to the next processes stack, code emitted by the compiler, has "cached" the 'prev' processes's esp via ebp, and uses this at return to restore... So in effect, esp would again get changed to prev's esp.
switch_to is a MACRO and saves ebp on stack and restores it. The above ensures that the cached ebp is also changed to the next's cached ebp, in some sense. I removed the push %ebp , and pop %ebp from switch_to and ran and it promptly crashed. But with -fomit-frame-pointer, all this does not take place.
Still, could some one enlighten me on why esi and edi are also similarly saved and restored ?
-----Original Message-----
From: Jamie Lokier <[email protected]>
To: Parity Error <[email protected]>
Date: Mon, 19 Mar 2001 15:04:25 +0100
Subject: Re: switch_to()/doesnt %esp get replaced with %ebp on ret
=
=That's not nice code from the compiler (suboptimal), but it'll work. =leal -24(%ebp),%esp is perfectly ok in the epilogue of a function. =You're right that %esp is lost -- in this case, %ebp has effectively the =same information.
=
=Think like this: a perfectly normal function (without switch_to) can =have this:
=
=f: pushl %ebp
= movl %esp,%ebp = pushl %ebx = ... do stuff, decrement %esp a lot to call functions etc. etc. ... = movl -4(%ebp),%esp = popl %ebx = popl %ebp = ret
=
=Parity Error wrote:
=> in schedule(), switch_to() macro changes esp to => the new process's stack. But, on exit frm schedule, => how come it does not get overwritten with ebp-24, => as the dissasembled code shows. The code was compiled => without the -fomit-frame-pointer.
=>
=> pushl 508(%ecx) => jmp __switch_to => 1: popl %ebp => popl %edi => popl %esi
=>
=> jmp .L1180
=>
=> .L1180:
=> leal -24(%ebp),%esp
=> popl %ebx => popl %esi => popl %edi => movl %ebp,%esp => popl %ebp => ret
=
Quoted 2 lines · Parity Error
I dont know if you understood my doubt, but your pointer to bp accidentally or otherwise solved the mystery.
We agree, and I like your explanation.
Quoted 2 lines
Still, could some one enlighten me on why esi and edi are also similarly saved and restored ?
The compiler _may_ cache other values in those registers across the call to switch_to. Although this doesn't happen in your kernel, it does sometimes happen and switch_to must be coded to assume that it does.
You can safely remove the esi & edi pushes and pops, if you put those registers in the "clobber" list of the asm. In theory that's best, because then the compiler will save the register values itself only if it needs to.
In practice, putting them in the clobber list sometimes results in worse code, at least when I tried this in the 2.2 series.
You can't put ebp in the clobber list for some reason: GCC silently ignores it. (Maybe that's fixed now too, I don't know).
-- Jamie