[Fwd: Problem with file => 2GB]
This is forwarded from the [email protected] mailing list. I think you guys can answer this question better. Please cc: them in any replies.
-b
Quoted 38 lines · Fabio Pietrosanti (naif)
Hi ppl,
i'm currently involved in the analisys of a compromised linux box. It was a IBM xSeries server.I transfer the partition of the server using cat /dev/partition| nc
host_of_dump_storage8889, then i check the checksum using md5sum and all it's ok.Where's the problem?
There are 2 partition dump of 8GB .
So i have to mount another 30GB hd, i installed Linux Kernel 2.4.2 with the 30gb on reiserfs .
I recompiled all fileutils, util-linux and bin-utils with kernel 2.4.2 and the define for => 2GB file support .Ok, now i could download the partition, i could ls, more, strings the partition, but i need to use it as loop device!!
When i mount the partition as loop device the mount command HANG on
read()function... it seems that loop device under linux didn't work against => 2gb files ?Any solutions?
Best Regards
--
Pietrosanti Fabio I.NET SpA, High Quality Access to the Internet
e-mail: [email protected] ( Direzione Tecnica, Security Staff )
[email protected]
PGP Key (DSS) http://naif.itapac.net/naif.ascHome Page URL: http://www.inet.it Sede: Via Darwin, 85 20019 Settimo Milanese (MI) Tel: 02-328631 Fax: 02-328637701--
Free advertising: www.openbsd.org - Multiplatform Ultra-secure OS
Quoted 13 lines · Fabio Pietrosanti (naif)
Quoted 13 lines
i'm currently involved in the analisys of a compromised linux box. It was a IBM xSeries server.
I transfer the partition of the server using cat /dev/partition| nc
host_of_dump_storage8889, then i check the checksum using md5sum and all it's ok.There are 2 partition dump of 8GB .
So i have to mount another 30GB hd, i installed Linux Kernel 2.4.2 with the 30gb on reiserfs .
I recompiled all fileutils, util-linux and bin-utils with kernel 2.4.2 and the define for => 2GB file support .
Quoted 6 lines
Quoted 6 lines
Ok, now i could download the partition, i could ls, more, strings the partition, but i need to use it as loop device!!
When i mount the partition as loop device the mount command HANG on
read()function... it seems that loop device under linux didn't work against => 2gb files ?
There is a bug in 2.4.2 with the loop device, which is fixed in -ac series. Also, I don't think it is possible to use > 2GB for loop (or at least that used to be the case).
Cheers, Andreas
Signature · 3 lines
Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto,
\ would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- DogbertQuoted 1 line · Andreas Dilger
There is a bug in 2.4.2 with the loop device, which is fixed in -ac series.
Also fixed in 2.4.3-pre series.
cu
Jup