Skip to contentSkip to conversation

/proc/cpuinfo for Intel P4 D850GB

DISCUSSION [email protected] 11 participants 15 messages Mar 19, 2001 – Mar 21, 2001

lore
Share & tools
lore
#0 lore raw

On a 2.0.36 kernel the above-referenced mb
shows:

dragonwind:/proc# cat cpuinfo
processor	: 0
cpu		: ?86
model		: 386 SX/DX
vendor_id	: GenuineIntel

At the least, java breaks because of the '?' char.

Is the problem is due to the older 2.0.36 kernel,
or would the problem also present itself on a newer 2.2.x kernel?

Annette

#1 lore raw
Quoted 4 lines · On Sun, 18 Mar 2001 [email protected] wrote:

On a 2.0.36 kernel the above-referenced mb
shows:
...
Is the problem is due to the older 2.0.36 kernel,

Yes.

Quoted 1 line

or would the problem also present itself on a newer 2.2.x kernel?

Current 2.2 and 2.4 are both fixed for this problem.

This and a few other CPU related fixes should probably be backported to 2.0 if someone has the spare time.

regards,

Dave.

Signature · 2 lines
| Dave Jones.        http://www.suse.de/~davej
| SuSE Labs
#2 lore raw

2.4.3-pre4: Unable to handle kernel NULL pointer dereference at virtual address 000000fb

In reply to [email protected]

I have included the ksymoops debug and dmesg (both small).. Any ideas?

Shawn.

ksymoops 2.3.7 on i586 2.4.3-pre4. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-pre4/ (default)
-m /boot/System.map (specified)

Intel Pentium with F0 0F bug - workaround enabled.

Unable to handle kernel NULL pointer dereference at virtual address 000000fb
c2016531
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c2016531>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000000 ebx: c0709dc8 ecx: c10e3a60 edx: c1258800
esi: 00000000 edi: 00000082 ebp: c1258878 esp: c0709f54
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)

Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282 
       c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000 
       c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb 
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>] 
Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82 
Quoted 1 line
Quoted 1 line

EIP; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====

Trace; c20165cf <[aha152x]aha152x_bus_reset+13/a0> Trace; c019dddf <scsi_try_bus_reset+3f/90> Trace; c019e427 <scsi_unjam_host+35b/75c> Trace; c019e8fb <scsi_error_handler+d3/138> Trace; c010742c <kernel_thread+28/38>
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> 00000000 <_EIP>:
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====
0: f6 80 fb 00 00 00 10 testb $0x10,0xfb(%eax) <=====
Code; c2016538 <[aha152x]free_hard_reset_SCs+28/ac>
7: 75 70 jne 79 <_EIP+0x79> c20165aa <[aha152x]free_hard_reset_SCs+9a/ac>
Code; c201653a <[aha152x]free_hard_reset_SCs+2a/ac>
9: 8b 4d 00 mov 0x0(%ebp),%ecx
Code; c201653d <[aha152x]free_hard_reset_SCs+2d/ac>
c: 31 d2 xor %edx,%edx
Code; c201653f <[aha152x]free_hard_reset_SCs+2f/ac>
e: eb 0a jmp 1a <_EIP+0x1a> c201654b <[aha152x]free_hard_reset_SCs+3b/ac>
Code; c2016541 <[aha152x]free_hard_reset_SCs+31/ac>
10: 89 ca mov %ecx,%edx
Code; c2016543 <[aha152x]free_hard_reset_SCs+33/ac>
12: 8b 82 00 00 00 00 mov 0x0(%edx),%eax

Linux version 2.4.3-pre4 (root@stucko) (gcc version 2.95.3 20010219 (prerelease)) #1 Sun Mar 18 01:29:02 EST 2001
BIOS-provided physical RAM map:
BIOS-88: 000000000009f000 @ 0000000000000000 (usable)
BIOS-88: 0000000001700000 @ 0000000000100000 (usable)
On node 0 totalpages: 6144
zone(0): 4096 pages.
zone(1): 2048 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 83.524 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 166.29 BogoMIPS
Memory: 22124k/24576k available (996k kernel code, 2064k reserved, 382k data, 60k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
CPU: Before vendor init, caps: 0000013f 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 0000013f 00000000 00000000 00000000
CPU: After generic, caps: 0000013f 00000000 00000000 00000000
CPU: Common caps: 0000013f 00000000 00000000 00000000
CPU: Intel OverDrive PODP5V83 stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
isapnp: Scanning for Pnp cards...
isapnp: Card 'Adaptec AVA-1505AI'
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 2 Plug & Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
block: queued sectors max/low 14605kB/4868kB, 64 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
hda: ST3491A D, ATA DISK drive
hdb: QUANTUM PD210A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 836070 sectors (428 MB) w/120KiB Cache, CHS=899/15/62
hdb: 408564 sectors (209 MB) w/32KiB Cache, CHS=873/13/36
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2
paride: epat registered as protocol 0
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Sharing parport0 at 0x378
pda: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1
pda: AVATAR AR2250, master, 489472 blocks [239M], (956/16/32), removable media
pda: pda1
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
eth0: 3c509 at 0x220, 10baseT port, address 00 a0 24 46 41 c0, IRQ 5.
3c509.c:1.16 (2.2) 2/3/98 [email protected].
loop: loaded (max 8 devices)
Serial driver version 5.05 (2000-12-13) with ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
ttyS01 at 0x02f8 (irq = 3) is a 16450
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
ip_conntrack (192 buckets, 1536 max)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 20568k swap-space (priority -1)
eth0: Setting Rx mode to 1 addresses.
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x: resetting bus...
aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=10, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.4 $
request_module[scsi_hostadapter]: waitpid(296,...) failed, errno 512
Detected scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type -1
resize_dma_pool: unknown device type -1
aha152x: timer expired

Unable to handle kernel NULL pointer dereference at virtual address 000000fb
 printing eip:
c2016531
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c2016531>]
EFLAGS: 00010082
eax: 00000000   ebx: c0709dc8   ecx: c10e3a60   edx: c1258800
esi: 00000000   edi: 00000082   ebp: c1258878   esp: c0709f54
ds: 0018   es: 0018   ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)
Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282 
       c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000 
       c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb 
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>] 

Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82 
#3 lore raw
In reply to [email protected]
Quoted 9 lines · On Sun, Mar 18, 2001 at 08:07:20PM -0600, [email protected] wrote:

On a 2.0.36 kernel the above-referenced mb
shows:

dragonwind:/proc# cat cpuinfo
processor	: 0
cpu		: ?86
model		: 386 SX/DX
vendor_id	: GenuineIntel
Quoted 4 lines

At the least, java breaks because of the '?' char.

Is the problem is due to the older 2.0.36 kernel,
or would the problem also present itself on a newer 2.2.x kernel?

Ahhhh, bit by the "IV written as 15 by Intel"-bug.

I'll hack up a fix to apply against v2.0.39.

And no, you won't be bit by this bug in a recent v2.2 or v2.4 kernel.

/David
_ _
// David Weinehall <[email protected]> /> Northern lights wander \\

//  Project MCA Linux hacker        //  Dance across the winter sky //
\>  http://www.acc.umu.se/~tao/    </   Full colour fire           </
#4 lore raw

2.4.3-pre4: Unable to handle kernel NULL pointer dereference at virtual address 000000fb

In reply to [email protected]

I have included the ksymoops debug and dmesg (both small).. Any ideas?

Shawn.

ksymoops 2.3.7 on i586 2.4.3-pre4. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-pre4/ (default)
-m /boot/System.map (specified)

Intel Pentium with F0 0F bug - workaround enabled.

Unable to handle kernel NULL pointer dereference at virtual address 000000fb
c2016531
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c2016531>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000000 ebx: c0709dc8 ecx: c10e3a60 edx: c1258800
esi: 00000000 edi: 00000082 ebp: c1258878 esp: c0709f54
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)

Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282 
       c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000 
       c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb 
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>] 
Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82 
Quoted 1 line
Quoted 1 line

EIP; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====

Trace; c20165cf <[aha152x]aha152x_bus_reset+13/a0> Trace; c019dddf <scsi_try_bus_reset+3f/90> Trace; c019e427 <scsi_unjam_host+35b/75c> Trace; c019e8fb <scsi_error_handler+d3/138> Trace; c010742c <kernel_thread+28/38>
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> 00000000 <_EIP>:
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====
0: f6 80 fb 00 00 00 10 testb $0x10,0xfb(%eax) <=====
Code; c2016538 <[aha152x]free_hard_reset_SCs+28/ac>
7: 75 70 jne 79 <_EIP+0x79> c20165aa <[aha152x]free_hard_reset_SCs+9a/ac>
Code; c201653a <[aha152x]free_hard_reset_SCs+2a/ac>
9: 8b 4d 00 mov 0x0(%ebp),%ecx
Code; c201653d <[aha152x]free_hard_reset_SCs+2d/ac>
c: 31 d2 xor %edx,%edx
Code; c201653f <[aha152x]free_hard_reset_SCs+2f/ac>
e: eb 0a jmp 1a <_EIP+0x1a> c201654b <[aha152x]free_hard_reset_SCs+3b/ac>
Code; c2016541 <[aha152x]free_hard_reset_SCs+31/ac>
10: 89 ca mov %ecx,%edx
Code; c2016543 <[aha152x]free_hard_reset_SCs+33/ac>
12: 8b 82 00 00 00 00 mov 0x0(%edx),%eax

Linux version 2.4.3-pre4 (root@stucko) (gcc version 2.95.3 20010219 (prerelease)) #1 Sun Mar 18 01:29:02 EST 2001
BIOS-provided physical RAM map:
BIOS-88: 000000000009f000 @ 0000000000000000 (usable)
BIOS-88: 0000000001700000 @ 0000000000100000 (usable)
On node 0 totalpages: 6144
zone(0): 4096 pages.
zone(1): 2048 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 83.524 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 166.29 BogoMIPS
Memory: 22124k/24576k available (996k kernel code, 2064k reserved, 382k data, 60k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
CPU: Before vendor init, caps: 0000013f 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 0000013f 00000000 00000000 00000000
CPU: After generic, caps: 0000013f 00000000 00000000 00000000
CPU: Common caps: 0000013f 00000000 00000000 00000000
CPU: Intel OverDrive PODP5V83 stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
isapnp: Scanning for Pnp cards...
isapnp: Card 'Adaptec AVA-1505AI'
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 2 Plug & Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
block: queued sectors max/low 14605kB/4868kB, 64 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
hda: ST3491A D, ATA DISK drive
hdb: QUANTUM PD210A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 836070 sectors (428 MB) w/120KiB Cache, CHS=899/15/62
hdb: 408564 sectors (209 MB) w/32KiB Cache, CHS=873/13/36
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2
paride: epat registered as protocol 0
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Sharing parport0 at 0x378
pda: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1
pda: AVATAR AR2250, master, 489472 blocks [239M], (956/16/32), removable media
pda: pda1
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
eth0: 3c509 at 0x220, 10baseT port, address 00 a0 24 46 41 c0, IRQ 5.
3c509.c:1.16 (2.2) 2/3/98 [email protected].
loop: loaded (max 8 devices)
Serial driver version 5.05 (2000-12-13) with ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
ttyS01 at 0x02f8 (irq = 3) is a 16450
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
ip_conntrack (192 buckets, 1536 max)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 20568k swap-space (priority -1)
eth0: Setting Rx mode to 1 addresses.
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x: resetting bus...
aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=10, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.4 $
request_module[scsi_hostadapter]: waitpid(296,...) failed, errno 512
Detected scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type -1
resize_dma_pool: unknown device type -1
aha152x: timer expired

Unable to handle kernel NULL pointer dereference at virtual address 000000fb
 printing eip:
c2016531
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c2016531>]
EFLAGS: 00010082
eax: 00000000   ebx: c0709dc8   ecx: c10e3a60   edx: c1258800
esi: 00000000   edi: 00000082   ebp: c1258878   esp: c0709f54
ds: 0018   es: 0018   ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)
Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282 
       c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000 
       c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb 
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>] 

Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82 
#5 lore raw

Question about memory usage in 2.4 vs 2.2

In reply to [email protected]

Greetings,

I have a server farm made of identical hardware running pop3 and imap mail functions. recently, we upgraded all the machines to kernel 2.4.2, but we noticed that according to free, our memory utilization went way up. Here is the output of free on the 2.4.2 machine:
total used free shared buffers cached
Mem: 513192 492772 20420 0 1684 263188
-/+ buffers/cache: 227900 285292
Swap: 819304 540 818764

On the 2.2..18 machine:
total used free shared buffers cached

Mem:        517256     351280     165976      19920      82820     186836
-/+ buffers/cache:      81624     435632
Swap:       819304          0     819304

Doing the math, the 2.4 machine is using 44% of available memory, while the 2.2 is using only about 14%.

Here are the contents of /proc/meminfo on 2.4:
total: used: free: shared: buffers: cached:

Mem:  525508608 517480448  8028160        0  1138688 282091520
Swap: 838967296   552960 838414336
MemTotal:       513192 kB
MemFree:          7840 kB
MemShared:           0 kB
Buffers:          1112 kB
Cached:         275480 kB
Active:         254876 kB
Inact_dirty:     18880 kB
Inact_clean:      2836 kB
Inact_target:       48 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       513192 kB
LowFree:          7840 kB
SwapTotal:      819304 kB
SwapFree:       818764 kB

on 2.2:
total: used: free: shared: buffers: cached:

Mem:  529670144 366837760 162832384 22945792 84807680 194367488
Swap: 838967296        0 838967296
MemTotal:    517256 kB
MemFree:     159016 kB
MemShared:    22408 kB
Buffers:      82820 kB
Cached:      189812 kB
SwapTotal:   819304 kB
SwapFree:    819304 kB

These machines are dual P2-400's, with 512M ECC ram, adaptec 2940, and dual intel etherexpress pro 100 cards.

I also tried 2.4.2-ac20 with similar results.

Am I missing something here? I'd really like to move the farm back up to 2.4 series.

Thanks,

Josh

---
Josh Grebe
Senior Unix Systems Administrator
Primary Network, an MPower Company
http://www.primary.net

#6 lore raw

Re: Question about memory usage in 2.4 vs 2.2

In reply to [email protected]
Quoted 1 line · Josh Grebe

Greetings,

...

Quoted 2 lines

Doing the math, the 2.4 machine is using 44% of available memory, while the 2.2 is using only about 14%.

How is the performance difference ?

...

Quoted 7 lines

These machines are dual P2-400's, with 512M ECC ram, adaptec 2940, and dual intel etherexpress pro 100 cards.

I also tried 2.4.2-ac20 with similar results.

Am I missing something here? I'd really like to move the farm back up to 2.4 series.

Free memory is wasted memory. It seemed like 2.4 wasted a lot less memory
than 2.2 on your workload.

Could you do some performance measurements (eg. average latency on IMAP
connection or something like that) ? It would be great to know wheter
2.4 is better or worse than 2.2 (it's most likely better, since it probably uses the memory better, but it would be nice to know)

Signature · 6 lines
................................................................
:   [email protected]   : And I see the elder races,         :
:.........................: putrid forms of man                :
:   Jakob Østergaard      : See him rise and claim the earth,  :
:        OZ9ABN           : his downfall is at hand.           :
:.........................:............{Konkhra}...............:
#7 lore raw

Re: Question about memory usage in 2.4 vs 2.2

As far as performance goes, I can only say that my max load is slightly lower on the 2.4 box then on the 2.2 boxes. Our average load for yesterday on 2.4 was .23, with a max of 1.11. In comparison, my averages for the other machines are .27, .27, .23, and .23. The maxes are 1.85, 1.33, 2.06, 1.47.

As far as speed goes, I am not able to measure any real difference (only testing pop3) between 2.2 and 2.4. I would blame this on the NAS device, a NetApp Filer F760 being only able to push about 110mbit sustained on the gig-e network.

Thanks,

Josh
---
Josh Grebe
Senior Unix Systems Administrator
Primary Network, an MPower Company
http://www.primary.net

Quoted 33 lines · On Tue, 20 Mar 2001, [iso-8859-1] Jakob �stergaard wrote:
Quoted 1 line · Josh Grebe

Greetings,

...

Quoted 2 lines

Doing the math, the 2.4 machine is using 44% of available memory, while the 2.2 is using only about 14%.

How is the performance difference ?

...

Quoted 7 lines

These machines are dual P2-400's, with 512M ECC ram, adaptec 2940, and dual intel etherexpress pro 100 cards.

I also tried 2.4.2-ac20 with similar results.

Am I missing something here? I'd really like to move the farm back up to 2.4 series.

Free memory is wasted memory. It seemed like 2.4 wasted a lot less memory
than 2.2 on your workload.

Could you do some performance measurements (eg. average latency on IMAP
connection or something like that) ? It would be great to know wheter
2.4 is better or worse than 2.2 (it's most likely better, since it probably uses the memory better, but it would be nice to know)

Signature · 6 lines
................................................................
:   [email protected]   : And I see the elder races,         :
:.........................: putrid forms of man                :
:   Jakob �stergaard      : See him rise and claim the earth,  :
:        OZ9ABN           : his downfall is at hand.           :
:.........................:............{Konkhra}...............:
#8 lore raw

Re: Question about memory usage in 2.4 vs 2.2

In reply to [email protected]
Quoted 14 lines · Josh Grebe

Greetings,

I have a server farm made of identical hardware running pop3 and imap mail functions. recently, we upgraded all the machines to kernel 2.4.2, but we noticed that according to free, our memory utilization went way up. Here is the output of free on the 2.4.2 machine:
total used free shared buffers cached
Mem: 513192 492772 20420 0 1684 263188
-/+ buffers/cache: 227900 285292
Swap: 819304 540 818764

On the 2.2..18 machine:
total used free shared buffers cached

Quoted 7 lines
Mem:        517256     351280     165976      19920      82820     186836
-/+ buffers/cache:      81624     435632
Swap:       819304          0     819304

Doing the math, the 2.4 machine is using 44% of available memory, while the 2.2 is using only about 14%.

What does /proc/slabinfo report for the number of pages locked down in the inode and dentry caches? My machine has pretty much every inode in memory and is using close to 50% of my memory for these (214MB/512MB).

These caches do not seem to be counted towards 'reclaimable' memory by the new VM and are only pruned when _all_ other attempts to free up memory have failed.

This becomes very noticeable on a not very fast, small memory machine (i.e. 48MB sparc-IPC), where 2.2 stays relatively snappy, but 2.4 becomes unusable after an updatedb run.

Jan

#9 lore raw

Re: Question about memory usage in 2.4 vs 2.2

slabinfo reports:

inode_cache       189974 243512    480 30439 30439    1 :  124   62
dentry_cache      201179 341940    128 11398 11398    1 :  252  126

However, I am hard pressed to find documentation on how to actually read this data, especially on a SMP box. Could someone give me a brief runwdown?

Also, if this memory is cached, wouldn't it make sense if it were reported as part of the total cached memory in /proc/meminfo? And can this behavior be tuned so that it uses less of the overall memory?

Thanks,

Josh

---
Josh Grebe
Senior Unix Systems Administrator
Primary Network, an MPower Company
http://www.primary.net

Quoted 37 lines · Jan Harkes
Quoted 14 lines · Josh Grebe

Greetings,

I have a server farm made of identical hardware running pop3 and imap mail functions. recently, we upgraded all the machines to kernel 2.4.2, but we noticed that according to free, our memory utilization went way up. Here is the output of free on the 2.4.2 machine:
total used free shared buffers cached
Mem: 513192 492772 20420 0 1684 263188
-/+ buffers/cache: 227900 285292
Swap: 819304 540 818764

On the 2.2..18 machine:
total used free shared buffers cached

Quoted 7 lines
Mem:        517256     351280     165976      19920      82820     186836
-/+ buffers/cache:      81624     435632
Swap:       819304          0     819304

Doing the math, the 2.4 machine is using 44% of available memory, while the 2.2 is using only about 14%.

What does /proc/slabinfo report for the number of pages locked down in the inode and dentry caches? My machine has pretty much every inode in memory and is using close to 50% of my memory for these (214MB/512MB).

These caches do not seem to be counted towards 'reclaimable' memory by the new VM and are only pruned when _all_ other attempts to free up memory have failed.

This becomes very noticeable on a not very fast, small memory machine (i.e. 48MB sparc-IPC), where 2.2 stays relatively snappy, but 2.4 becomes unusable after an updatedb run.

Jan

#10 lore raw

Re: Question about memory usage in 2.4 vs 2.2

Quoted 4 lines · Josh Grebe

slabinfo reports:

inode_cache       189974 243512    480 30439 30439    1 :  124   62
dentry_cache      201179 341940    128 11398 11398    1 :  252  126
                                      ^

<name> <used> <allocd> | <used> <allocd>
<in objects> <size> <in pages>

Quoted 3 lines

However, I am hard pressed to find documentation on how to actually read this data, especially on a SMP box. Could someone give me a brief runwdown?

See above. The columns further to the right are debugging info.

Quoted 2 lines

Also, if this memory is cached, wouldn't it make sense if it were reported as part of the total cached memory in /proc/meminfo?

I'd definately like to see this. It would be great if somebody
would sit down and implement this. <hint> <hint>

Quoted 2 lines

And can this behavior be tuned so that it uses less of the overall memory?

This isn't currently possible. Also, I suspect what we really want for most situations is a way to better balance between the different uses of memory. Again, patches are welcome (I haven't figured out a way to take care of this balancing yet ... maybe we DO want some way of limiting memory usage of each subsystem??).

regards,

Rik
--
Virtual memory is like a game you can't win; However, without VM there's truly nothing to lose...

		http://www.surriel.com/

http://www.conectiva.com/ http://distro.conectiva.com.br/

#11 lore raw

RE: Question about memory usage in 2.4 vs 2.2

:: > And can this behavior be tuned so that it uses less of the overall :: > memory?
::
:: This isn't currently possible. Also, I suspect what we really want :: for most situations is a way to better balance between the different :: uses of memory. Again, patches are welcome (I haven't figured out a :: way to take care of this balancing yet ... maybe we DO want some way :: of limiting memory usage of each subsystem??).

man ulimit? ;-)

On a more serious note, is there a way to find out what has been paged out to disk, and also limit what can be paged out?

I could be wrong, but for instance I leave X running for a while (not sure about the timing here but let's say several hours), and come back and log in again, it is very slow to "come alive". The screen redraws slowly, and there's quite a bit of disk access. This only happens if the system is left alone for a long period of time (no, I don't have APM running on it).

Squid behaves the same -- the first access after a long period of inactivity causes a lot of disk grinding, but successive accesses are fine.

Don't see this behaviour with the 2.2.x kernels.

-- Juha

#12 lore raw

Re: Question about memory usage in 2.4 vs 2.2

In reply to Josh Grebe
Quoted 8 lines
Quoted 4 lines

slabinfo reports:

inode_cache       189974 243512    480 30439 30439    1 :  124   62
dentry_cache      201179 341940    128 11398 11398    1 :  252  126
                                      ^

<name> <used> <allocd> | <used> <allocd>
<in objects> <size> <in pages>

Then how to interpret slabinfo in 2.2.16 box?
e.g. grep cache /proc/slabinfo

kmem_cache 32 42
skbuff_head_cache 2676 2730
dentry_cache 15626 16988

files_cache          103    108
uid_cache             10    127
slab_cache            85    126

what does those numbers mean?

Furthermore, are those cache info above reported as part of the total cache in /proc/meminfo ?

Lastly, which cache can be reclaimed, and which can't?

I am doing some memory measurements in 2.2.16 linux box. Thanks in advance!

Signature · 2 lines
Cheers!
--Zou Min 
#13 lore raw

Re: Question about memory usage in 2.4 vs 2.2

Quoted 11 lines · Zou Min

Then how to interpret slabinfo in 2.2.16 box?
e.g. grep cache /proc/slabinfo

kmem_cache 32 42
skbuff_head_cache 2676 2730
dentry_cache 15626 16988

files_cache          103    108
uid_cache             10    127
slab_cache            85    126

what does those numbers mean?

First number is in-use objects in that cache, second number is currently-allocated objects in that cache.

Quoted 2 lines

Furthermore, are those cache info above reported as part of the total cache in /proc/meminfo ?

Don't know.

Quoted 1 line

Lastly, which cache can be reclaimed, and which can't?

Slab cache will shrink if there are whole pages which are empty (it may be that they have to be at the end of the cache). It is hard to tell from the above numbers if any of the caches could shrink, because it depends on the number of objects per page, and if there are any whole pages without allocated objects.

Cheers, Andreas

Signature · 3 lines
Andreas Dilger  \ "If a man ate a pound of pasta and a pound of antipasto,
                 \  would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/               -- Dogbert
#14 lore raw

Re: Question about memory usage in 2.4 vs 2.2

In reply to Zou Min
Quoted 7 lines
Quoted 1 line

Lastly, which cache can be reclaimed, and which can't?

Slab cache will shrink if there are whole pages which are empty (it may be that they have to be at the end of the cache). It is hard to tell from the above numbers if any of the caches could shrink, because it depends on the number of objects per page, and if there are any whole pages without allocated objects.

Btw, how to know the size of each objects in different cache?

Signature · 2 lines
Cheers!
--Zou Min