Skip to contentSkip to conversation

NTP on 2.4.2?

DISCUSSION Russell King 4 participants 5 messages Mar 23, 2001 – Mar 28, 2001

lore
Share & tools
lore
#1 lore raw
Quoted 2 lines · Russell King

Is anyone else using NTP with 2.4.2, and if so, are you synchronising properly?

Works for me. (RH7, ntp-4.0.99j-7, Kernel 2.4.2-ac23 - but worked with plain 2.4.2, too)

Holger

#2 lore raw
In reply to Russell King
Quoted 2 lines · Russell King

I'm having problems getting my 2.4.2 kernel to synchronise properly. For some reason, NTP is insisting on making time offset adjustments.

It isn't a GMT vs localtime issue, I presume?

Quoted 3 lines

Is anyone else using NTP with 2.4.2, and if so, are you synchronising properly?

Yes, working fine for me.

Quoted 1 line

(I'm using the RH7.0 version of ntp-4.0.99j here)

Suse 6.3, xntp-4.0.98d-0, mostly vanilla kernel 2.4.2

Signature · 1 line
Erik Hensema ([email protected])
#3 lore raw
Quoted 5 lines · Erik Hensema
Quoted 2 lines · Russell King

I'm having problems getting my 2.4.2 kernel to synchronise properly. For some reason, NTP is insisting on making time offset adjustments.

It isn't a GMT vs localtime issue, I presume?

No, I solved the problem - the 100Hz interrupt wasn't close enough to 100Hz to allow NTP to do its job.

--
Russell King ([email protected]) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html

#4 lore raw
In reply to Russell King

Hi!

Quoted 2 lines

I'm having problems getting my 2.4.2 kernel to synchronise properly. For some reason, NTP is insisting on making time offset adjustments.

Are you using fbcon? If so, and if it goes away after starting X, then it is the "fbcon kills interrupt latency" problem.
Pavel

Signature · 2 lines
Philips Velo 1: 1"x4"x8", 300gram, 60, 12MB, 40bogomips, linux, mutt,
details at http://atrey.karlin.mff.cuni.cz/~pavel/velo/index.html.