ext2 corruption in 2.4.2, scsi only system
Quoted 8 lines · Dale E Martin
[snip]
I had had good luck with 2.4.x on other boxes, so I put it on this machine as well. Several times now I've seen ext2 corruption with no other noteworthy logs.
.....
The machine is a dual PPro, it has a Buslogic BT958 with a single 9G scsi/wide drive in it.
....
Dale,
Alan Cox has reported the following:
Quoted 3 lines
2.4.2-ac19
.......
o Hopefully fix the buslogic corruptions (me)
Alan's ac tree also contains a consolidated set of patches from Eric Youngdale for the SCSI midlevel. Alan's latest is ac25 and may be worth trying (ac24 has been working fine for me).
Doug Gilbert
Quoted 11 lines
Dale,
Alan Cox has reported the following:Quoted 3 lines
2.4.2-ac19
.......
o Hopefully fix the buslogic corruptions (me)Alan's ac tree also contains a consolidated set of patches from Eric Youngdale for the SCSI midlevel. Alan's latest is ac25 and may be worth trying (ac24 has been working fine for me).
After scanning the mailing list archives, I was under the impression that this Buslogic issue was an AC series problem. Is there a known problem with Buslogic controllers in 2.4.2?
Thanks for the info.
Dale
Signature · 5 lines
Dale E. Martin, Clifton Labs, Inc. Senior Computer Engineer [email protected] http://www.cliftonlabs.com pgp key available
Quoted 3 lines
After scanning the mailing list archives, I was under the impression that this Buslogic issue was an AC series problem. Is there a known problem with Buslogic controllers in 2.4.2?
It seems there is. The changes in -ac and in 2.4.3pre limit the max blocks per request which seems to make it happier