Skip to contentSkip to conversation

Win keys not working in console (2.4.x)

DISCUSSION Jorge Nerin 2 participants 3 messages Mar 27, 2001

lore
Share & tools
lore
#0 lore raw

Hello, good work with 2.4.x, but I miss one thing. in early 2.3.x the MS keys, you know, two flags and one "properties" key worked as navigation keys in the console.

The flags get you to the "left" or "rigth" virtual console, and the "properties" key put you on the last console you where before.

This was very useful when working in the console, I use the console sometimes, and I miss these feature.

Is there a plan to put back these keys to work, or there was a problem of some kind and this feature got dropped?

--
Jorge Nerin
<[email protected]>

#1 lore raw
Quoted 9 lines · Jorge Nerin

Hello, good work with 2.4.x, but I miss one thing. in early 2.3.x the MS keys, you know, two flags and one "properties" key worked as navigation keys in the console.

The flags get you to the "left" or "rigth" virtual console, and the "properties" key put you on the last console you where before.

This was very useful when working in the console, I use the console sometimes, and I miss these feature.

(i) Find out what key codes these keys generate.
Vaguely I seem to recall that I made these keys produce 125, 126, 127. (the test command is "showkey")

(ii) Use loadkeys to assign functions to keys.
For example,
% loadkeys
keycode 125 = Incr_Console
keycode 126 = Decr_Console
keycode 127 = Last_Console
^D
should give you the desired behaviour.
Perhaps you lost some settings during an upgrade.

See loadkeys(1) and keytables(5).

#2 lore raw
In reply to Jorge Nerin
Quoted 24 lines · Guest section DW
Quoted 5 lines · Jorge Nerin

Hello, good work with 2.4.x, but I miss one thing. in early 2.3.x the MS keys, you know, two flags and one "properties" key worked as navigation keys in the console.

The flags get you to the "left" or "rigth" virtual console, and the "properties" key put you on the last console you where before.

This was very useful when working in the console, I use the console sometimes, and I miss these feature.

(i) Find out what key codes these keys generate.
Vaguely I seem to recall that I made these keys produce 125, 126, 127. (the test command is "showkey")

(ii) Use loadkeys to assign functions to keys.
For example,
% loadkeys
keycode 125 = Incr_Console
keycode 126 = Decr_Console
keycode 127 = Last_Console
^D
should give you the desired behaviour.
Perhaps you lost some settings during an upgrade.

Quoted 1 line

See loadkeys(1) and keytables(5).

Oh, thanks, as you say I should have lost it in an upgrade, don't know how. I thougth it was a kernel issue, sorry. :(

Thanks.

Signature · 2 lines
Jorge Nerin
<[email protected]>