Skip to contentSkip to conversation

es1371 pci fix/cleanup

PATCH In review Marcus Meissner 2 participants 4 messages Apr 23, 2001 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 es1371 pci fix/cleanup

Hi,

This moves pci_enable_device in the es1371 driver before any resource access and also replaces the RSRCISIOREGION by just pci_resource_flags as suggested by Jeff.

Tested and verified.

Ciao, Marcus

Index: drivers/sound/es1371.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1371.c,v retrieving revision 1.7

sound/es1371.c +4 -6
diff -u -r1.7 es1371.c
@@ -2771,9 +2771,6 @@
 	{ SOUND_MIXER_WRITE_IGAIN, 0x4040 }
 };
 
-#define RSRCISIOREGION(dev,num) (pci_resource_start((dev), (num)) != 0 && \
-				 (pci_resource_flags((dev), (num)) & IORESOURCE_IO))
-
 static int __devinit es1371_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
 {
 	struct es1371_state *s;
@@ -2783,8 +2780,11 @@
 	signed long tmo2;
 	unsigned int cssr;
 
-	if (!RSRCISIOREGION(pcidev, 0))
+	if (pci_enable_device(pcidev))
 		return -1;
+
+	if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_IO))
+		return -1;
 	if (pcidev->irq == 0) 
 		return -1;
 	i = pci_set_dma_mask(pcidev, 0xffffffff);
@@ -2822,8 +2822,6 @@
 		printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
 		goto err_region;
 	}
-	if (pci_enable_device(pcidev))
-		goto err_irq;
 	if (request_irq(s->irq, es1371_interrupt, SA_SHIRQ, "es1371", s)) {
 		printk(KERN_ERR PFX "irq %u in use\n", s->irq);
 		goto err_irq;
#1 lore raw
Quoted 30 lines · Marcus Meissner

Hi,

This moves pci_enable_device in the es1371 driver before any resource access and also replaces the RSRCISIOREGION by just pci_resource_flags as suggested by Jeff.

Tested and verified.

Ciao, Marcus

Index: drivers/sound/es1371.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1371.c,v retrieving revision 1.7
diff -u -r1.7 es1371.c

sound/es1371.c 2001/04/23 15:49:15 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +0 -3
@@ -2771,9 +2771,6 @@
        { SOUND_MIXER_WRITE_IGAIN, 0x4040 }
 };
 
-#define RSRCISIOREGION(dev,num) (pci_resource_start((dev), (num)) != 0 && \
-                                (pci_resource_flags((dev), (num)) & IORESOURCE_IO))
-
 static int __devinit es1371_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
 {
        struct es1371_state *s;
@@ -2783,8 +2780,11 @@
        signed long tmo2;

sound/es1371.c 2001/04/23 15:49:15 line 2789

Quoted 10 lines
sound/es1371.c 2001/04/23 15:49:15 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +4 -1
        unsigned int cssr;
 
-       if (!RSRCISIOREGION(pcidev, 0))
+       if (pci_enable_device(pcidev))
                return -1;
+
+       if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_IO))
+               return -1;
        if (pcidev->irq == 0)
                return -1;

Looks ok except error returns.

pci_enable_device - obtain its return value, and return that.

no IORESOURCE_IO or pcidev->irq==0 - I guess -ENODEV would be appropriate. (basically look at errno.h and make a judgement call which error best fits the situation)

Signature · 4 lines
Jeff Garzik      | The difference between America and England is that
Building 1024    | the English think 100 miles is a long distance and
MandrakeSoft     | the Americans think 100 years is a long time.
                 |      (random fortune)
#2 lore raw
In reply to Marcus Meissner
Quoted 10 lines · Jeff Garzik
Quoted 8 lines · Marcus Meissner

Hi,

This moves pci_enable_device in the es1371 driver before any resource access and also replaces the RSRCISIOREGION by just pci_resource_flags as suggested by Jeff.

Tested and verified.

Quoted 7 lines

Looks ok except error returns.

pci_enable_device - obtain its return value, and return that.

no IORESOURCE_IO or pcidev->irq==0 - I guess -ENODEV would be appropriate. (basically look at errno.h and make a judgement call which error best fits the situation)

Hmm, I think I spotted all places in the probe function. I also return -ENODEV in case we can't request_region() or request_irq().

Some drivers use EBUSY, some ENOMEM, some ENODEV there, is there any standard return value?

Ciao, Marcus

Index: drivers/sound/es1371.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1371.c,v retrieving revision 1.7

sound/es1371.c +9 -11
diff -u -r1.7 es1371.c
@@ -2771,22 +2771,22 @@
 	{ SOUND_MIXER_WRITE_IGAIN, 0x4040 }
 };
 
-#define RSRCISIOREGION(dev,num) (pci_resource_start((dev), (num)) != 0 && \
-				 (pci_resource_flags((dev), (num)) & IORESOURCE_IO))
-
 static int __devinit es1371_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
 {
 	struct es1371_state *s;
 	mm_segment_t fs;
-	int i, val;
+	int i, val, res = -1;
 	unsigned long tmo;
 	signed long tmo2;
 	unsigned int cssr;
+
+	if ((res=pci_enable_device(pcidev)))
+		return res;
 
-	if (!RSRCISIOREGION(pcidev, 0))
-		return -1;
+	if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_IO))
+		return -ENODEV;
 	if (pcidev->irq == 0) 
-		return -1;
+		return -ENODEV;
 	i = pci_set_dma_mask(pcidev, 0xffffffff);
 	if (i) {
 		printk(KERN_WARNING "es1371: architecture does not support 32bit PCI busmaster DMA\n");
@@ -2794,7 +2794,7 @@
 	}
 	if (!(s = kmalloc(sizeof(struct es1371_state), GFP_KERNEL))) {
 		printk(KERN_WARNING PFX "out of memory\n");
-		return -1;
+		return -ENOMEM;
 	}
 	memset(s, 0, sizeof(struct es1371_state));
 	init_waitqueue_head(&s->dma_adc.wait);
@@ -2822,8 +2822,6 @@
 		printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
 		goto err_region;
 	}
-	if (pci_enable_device(pcidev))
-		goto err_irq;
 	if (request_irq(s->irq, es1371_interrupt, SA_SHIRQ, "es1371", s)) {
 		printk(KERN_ERR PFX "irq %u in use\n", s->irq);
 		goto err_irq;
@@ -2964,7 +2962,7 @@
 	release_region(s->io, ES1371_EXTENT);
  err_region:
 	kfree(s);
-	return -1;
+	return -ENODEV;
 }
 
 static void __devinit es1371_remove(struct pci_dev *dev)
#3 lore raw
In reply to Marcus Meissner
Quoted 5 lines · Marcus Meissner

Hmm, I think I spotted all places in the probe function. I also return -ENODEV in case we can't request_region() or request_irq().

Some drivers use EBUSY, some ENOMEM, some ENODEV there, is there any standard return value?

request_region/request_mem_region - EBUSY
request_irq - return its return value

Quoted 40 lines

Ciao, Marcus

Index: drivers/sound/es1371.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1371.c,v retrieving revision 1.7
diff -u -r1.7 es1371.c

sound/es1371.c 2001/04/23 16:03:34 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +7 -7
@@ -2771,22 +2771,22 @@
        { SOUND_MIXER_WRITE_IGAIN, 0x4040 }
 };
 
-#define RSRCISIOREGION(dev,num) (pci_resource_start((dev), (num)) != 0 && \
-                                (pci_resource_flags((dev), (num)) & IORESOURCE_IO))
-
 static int __devinit es1371_probe(struct pci_dev *pcidev, const struct pci_device_id *pciid)
 {
        struct es1371_state *s;
        mm_segment_t fs;
-       int i, val;
+       int i, val, res = -1;
        unsigned long tmo;
        signed long tmo2;
        unsigned int cssr;
+
+       if ((res=pci_enable_device(pcidev)))
+               return res;
 
-       if (!RSRCISIOREGION(pcidev, 0))
-               return -1;
+       if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_IO))
+               return -ENODEV;
        if (pcidev->irq == 0)
-               return -1;
+               return -ENODEV;
        i = pci_set_dma_mask(pcidev, 0xffffffff);
        if (i) {
                printk(KERN_WARNING "es1371: architecture does not support 32bit PCI busmaster DMA\n");

sound/es1371.c 2001/04/23 16:03:34 line 2800

Quoted 8 lines
sound/es1371.c 2001/04/23 16:03:34 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +1 -1
@@ -2794,7 +2794,7 @@
        }
        if (!(s = kmalloc(sizeof(struct es1371_state), GFP_KERNEL))) {
                printk(KERN_WARNING PFX "out of memory\n");
-               return -1;
+               return -ENOMEM;
        }
        memset(s, 0, sizeof(struct es1371_state));
        init_waitqueue_head(&s->dma_adc.wait);

this part looks ok

Quoted 10 lines
sound/es1371.c 2001/04/23 16:03:34 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +0 -2
@@ -2822,8 +2822,6 @@
                printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
                goto err_region;
        }
-       if (pci_enable_device(pcidev))
-               goto err_irq;
        if (request_irq(s->irq, es1371_interrupt, SA_SHIRQ, "es1371", s)) {
                printk(KERN_ERR PFX "irq %u in use\n", s->irq);
                goto err_irq;

sound/es1371.c 2001/04/23 16:03:34 line 2968

Quoted 8 lines
sound/es1371.c 2001/04/23 16:03:34 renamed from sound/es1371.c 2001/04/17 17:26:05 1.7 +1 -1
@@ -2964,7 +2962,7 @@
        release_region(s->io, ES1371_EXTENT);
  err_region:
        kfree(s);
-       return -1;
+       return -ENODEV;
 }
 
 static void __devinit es1371_remove(struct pci_dev *dev)

Since you need to propagate return values from different situations, have an 'err' variable. Right before each goto err_foo statement, set err=Exxxxx. Then, at the very end of the function, return the value of 'err'. For a request_region failure, set err to EBUSY before calling goto. For a request_irq failure, have 'err' take the return value of request_irq.

Jeff

Signature · 4 lines
Jeff Garzik      | The difference between America and England is that
Building 1024    | the English think 100 miles is a long distance and
MandrakeSoft     | the Americans think 100 years is a long time.
                 |      (random fortune)