Skip to contentSkip to conversation

Problem with 2.4.1/2.4.3 and CD-RW ide-scsi drive

DISCUSSION Tim Meushaw 1 participant 4 messages Apr 12, 2001 – May 18, 2001

lore
Share & tools
lore
#0 lore raw

Hi there. I just got a new CD-RW drive and am trying to get it working under Linux. I've got the ide-scsi modules all loaded, but have weird errors when trying to mount a disk.

Here are the messages from "dmesg" that I get when the ide-cd and ide-scsi modules are loaded. My DVD-ROM is /dev/hdc, and the CD-RW is /dev/hdd (or /dev/sr0):

-----------------------------------------------------
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
ide-cd: ignoring drive hdd
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-----------------------------------------------------

So, it looks like the drive is attached to /dev/sr0 properly. Then, I run "cdrecord -scanbus" to make sure:

-----------------------------------------------------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX160E  ' '1.0e' Removable CD-ROM

-----------------------------------------------------

So, it REALLY looks like it's working. However, here's what I get when I try to mount an ordinary data CD:

-----------------------------------------------------

athens:~# mount -t iso9660 /dev/sr0 /cdrw
mount: block device /dev/sr0 is write-protected, mounting read-only
SCSI cdrom error : host 0 channel 0 id 0 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd0b:00: sense key Hardware Error
Additional sense indicates Logical unit communication CRC error (Ultra-DMA/32)
 I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
       or too many mounted file systems
-----------------------------------------------------

I've tried this with both kernel 2.4.1 and 2.4.3 and have the exact same error. I've also tried multiple data CDs and have the same messages. The CD-RW is a Sony CRX-160E, plugged in to an Asus A7V motherboard (the PCI bus is described by "lspci" as "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"). I'm not sure what other information I can provide, but I'll be happy to give anything else that might be needed to help fix this problem.

Thanks a lot!
Tim

Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
#1 lore raw

I've got an update for this problem I emailled about last night (and for which I only received one reply :-) ).

Strangely enough, I'm able to actually burn a CD using the cd-rw described below, and can verify data written to it (using X-CD-Roast). I still can't actually mount a cd in the drive without getting the error described below, but at least I can burn CDs now.

Does this behavior sound like a kernel problem, or does it suggest a bug in the 'mount' utility?

Tim

Quoted 60 lines · Tim Meushaw

Hi there. I just got a new CD-RW drive and am trying to get it working under Linux. I've got the ide-scsi modules all loaded, but have weird errors when trying to mount a disk.

Here are the messages from "dmesg" that I get when the ide-cd and ide-scsi modules are loaded. My DVD-ROM is /dev/hdc, and the CD-RW is /dev/hdd (or /dev/sr0):

-----------------------------------------------------
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
ide-cd: ignoring drive hdd
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-----------------------------------------------------

So, it looks like the drive is attached to /dev/sr0 properly. Then, I run "cdrecord -scanbus" to make sure:

-----------------------------------------------------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX160E  ' '1.0e' Removable CD-ROM

-----------------------------------------------------

So, it REALLY looks like it's working. However, here's what I get when I try to mount an ordinary data CD:

-----------------------------------------------------

athens:~# mount -t iso9660 /dev/sr0 /cdrw
mount: block device /dev/sr0 is write-protected, mounting read-only
SCSI cdrom error : host 0 channel 0 id 0 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd0b:00: sense key Hardware Error
Additional sense indicates Logical unit communication CRC error (Ultra-DMA/32)
 I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
       or too many mounted file systems
-----------------------------------------------------

I've tried this with both kernel 2.4.1 and 2.4.3 and have the exact same error. I've also tried multiple data CDs and have the same messages. The CD-RW is a Sony CRX-160E, plugged in to an Asus A7V motherboard (the PCI bus is described by "lspci" as "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"). I'm not sure what other information I can provide, but I'll be happy to give anything else that might be needed to help fix this problem.

Thanks a lot!
Tim

Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
#2 lore raw

CD-RW ide-scsi problem presists with 2.4.4 (was Re: Problem with 2.4.1/2.4.3 and CD-RW ide-scsi drive)

In reply to Tim Meushaw

I had received info that this may have been fixed in 2.4.3-ac5. I didn't get the chance to test it there, but I installed 2.4.4 this morning. Alas, I receive exactly the same errors with 2.4.4 as I did previously with 2.4.3.

One thing that did differ, though, shortly after I sent this first email, magically the drive started working properly. I was able to mount disks perfectly. However, I had to reboot for some reason or another, and the problem came back and has stayed with me ever since. As far as I know I didn't do anything to make it work when it did, it just "started working", which isn't an answer I like, but that's all I can say.... :-)

Tim

Quoted 60 lines · Tim Meushaw

Hi there. I just got a new CD-RW drive and am trying to get it working under Linux. I've got the ide-scsi modules all loaded, but have weird errors when trying to mount a disk.

Here are the messages from "dmesg" that I get when the ide-cd and ide-scsi modules are loaded. My DVD-ROM is /dev/hdc, and the CD-RW is /dev/hdd (or /dev/sr0):

-----------------------------------------------------
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
ide-cd: ignoring drive hdd
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-----------------------------------------------------

So, it looks like the drive is attached to /dev/sr0 properly. Then, I run "cdrecord -scanbus" to make sure:

-----------------------------------------------------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX160E  ' '1.0e' Removable CD-ROM

-----------------------------------------------------

So, it REALLY looks like it's working. However, here's what I get when I try to mount an ordinary data CD:

-----------------------------------------------------

athens:~# mount -t iso9660 /dev/sr0 /cdrw
mount: block device /dev/sr0 is write-protected, mounting read-only
SCSI cdrom error : host 0 channel 0 id 0 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd0b:00: sense key Hardware Error
Additional sense indicates Logical unit communication CRC error (Ultra-DMA/32)
 I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
       or too many mounted file systems
-----------------------------------------------------

I've tried this with both kernel 2.4.1 and 2.4.3 and have the exact same error. I've also tried multiple data CDs and have the same messages. The CD-RW is a Sony CRX-160E, plugged in to an Asus A7V motherboard (the PCI bus is described by "lspci" as "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"). I'm not sure what other information I can provide, but I'll be happy to give anything else that might be needed to help fix this problem.

Thanks a lot!
Tim

Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
#3 lore raw

Workaround Found for Re: CD-RW ide-scsi problem presists with 2.4.4 (was Re: Problem with 2.4.1/2.4.3 and CD-RW ide-scsi drive)

In reply to Tim Meushaw

Thanks to an email I got (hi Thomas!), I was able to use a workaround to the problem described below. I don't know if it's the accepted fix or not, but it worked for me.

What I did was set the DMA mode of the drive differently. I used the following hdparm command:

	hdparm -d 1 -X 34 /dev/hdd

After running that, I didn't have any problems. I wasn't able to tell what the mode was before running that, as I received errors from hdparm for half the parameters, presumably because of the SCSI emulation <shrug>.

I'm no longer subscribed to this list (too much traffic!), but wanted to report this workaround, and thanks to Thomas Baecker for giving me this answer when the same thing worked for him. :-)

Tim

Quoted 88 lines · Tim Meushaw

I had received info that this may have been fixed in 2.4.3-ac5. I didn't get the chance to test it there, but I installed 2.4.4 this morning. Alas, I receive exactly the same errors with 2.4.4 as I did previously with 2.4.3.

One thing that did differ, though, shortly after I sent this first email, magically the drive started working properly. I was able to mount disks perfectly. However, I had to reboot for some reason or another, and the problem came back and has stayed with me ever since. As far as I know I didn't do anything to make it work when it did, it just "started working", which isn't an answer I like, but that's all I can say.... :-)

Tim

Quoted 60 lines · Tim Meushaw

Hi there. I just got a new CD-RW drive and am trying to get it working under Linux. I've got the ide-scsi modules all loaded, but have weird errors when trying to mount a disk.

Here are the messages from "dmesg" that I get when the ide-cd and ide-scsi modules are loaded. My DVD-ROM is /dev/hdc, and the CD-RW is /dev/hdd (or /dev/sr0):

-----------------------------------------------------
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12
ide-cd: ignoring drive hdd
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
-----------------------------------------------------

So, it looks like the drive is attached to /dev/sr0 properly. Then, I run "cdrecord -scanbus" to make sure:

-----------------------------------------------------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX160E  ' '1.0e' Removable CD-ROM

-----------------------------------------------------

So, it REALLY looks like it's working. However, here's what I get when I try to mount an ordinary data CD:

-----------------------------------------------------

athens:~# mount -t iso9660 /dev/sr0 /cdrw
mount: block device /dev/sr0 is write-protected, mounting read-only
SCSI cdrom error : host 0 channel 0 id 0 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd0b:00: sense key Hardware Error
Additional sense indicates Logical unit communication CRC error (Ultra-DMA/32)
 I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
       or too many mounted file systems
-----------------------------------------------------

I've tried this with both kernel 2.4.1 and 2.4.3 and have the exact same error. I've also tried multiple data CDs and have the same messages. The CD-RW is a Sony CRX-160E, plugged in to an Asus A7V motherboard (the PCI bus is described by "lspci" as "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"). I'm not sure what other information I can provide, but I'll be happy to give anything else that might be needed to help fix this problem.

Thanks a lot!
Tim

Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
Signature · 8 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 3 lines
Timothy A. Meushaw
[email protected]
http://www.pobox.com/~meushaw/