tulip driver broken in 2.4.4?
Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes. The log says:
Apr 30 10:30:59 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out Apr 30 10:30:59 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting... Apr 30 10:31:07 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out Apr 30 10:31:07 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting...
... and so on repeatedly ...
I had to ifdown-ifup cycle to re-enable it but it's dead again after 5 minutes with the same problem. The card is LinkSys LNE100TX v4.1. It is currently working fine with 2.2.18. If there's any other info that is needed please let me know.
Ronny
Quoted 2 lines · Ronny Haryanto
Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes.
Does 2.4.3 work for you?
Signature · 3 lines
Jeff Garzik | Game called on account of naked chick Building 1024 | MandrakeSoft |
Quoted 5 lines · Jeff Garzik
Quoted 2 lines · Ronny Haryanto
Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes.
Does 2.4.3 work for you?
Yes. I just tried 2.4.3, and it works fine. So it looks like there's a bug introduced between 2.4.3 and 2.4.4. Too bad I can't use 2.4.3; I need 2.4.4 due to the VIA chipset bug. Is there any other info that I could provide from here to help debugging?
Ronny
Well, I guess I should chip in here with the rather amusing fact that 2.4.4 is the first kernel *not* to do this to me... ;-)
I am, of course, glad to help out testing stuff if needed. My card is also a LinkSys LNE100TX v4.1, which the tulip driver identifies as an ADMtek Comet rev 17 (although somebody told me it's really a Centaur).
-Jacob
Quoted 11 lines · Ronny Haryanto
Quoted 5 lines · Jeff Garzik
Quoted 2 lines · Ronny Haryanto
Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes.
Does 2.4.3 work for you?
Yes. I just tried 2.4.3, and it works fine. So it looks like there's a bug introduced between 2.4.3 and 2.4.4. Too bad I can't use 2.4.3; I need 2.4.4 due to the VIA chipset bug. Is there any other info that I could provide from here to help debugging?