Skip to contentSkip to conversation

iproute2, ETH_P_ECHO, linux/if_ether.h

PATCH Jim Freeman 2 participants 2 messages May 3, 2001 Network drivers

lore
Share & tools
lore
#0 lore raw

iproute2 compiles against 2.4.4 die.

Documentation/Changes sez:

	Ip-route2 
	---------
	o  <ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.2.4-now-ss991023.tar.gz>

But iproute2's lib/ll_proto.c tries to use ETH_P_ECHO from linux/if_ether.h, and that manifest constant has (recently ?) been yanked?

include/linux/if_ether.h +2 -2
@@ -37,12 +37,14 @@
  */
 
 #define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_ECHO	0x0200		/* Ethernet Echo packet		*/
-#define ETH_P_PUP	0x0400		/* Xerox PUP packet		*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
 #define ETH_P_IP	0x0800		/* Internet Protocol packet	*/

...

#1 lore raw
Quoted 10 lines · Jim Freeman

Documentation/Changes sez:

	Ip-route2 
	---------
	o  <ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.2.4-now-ss991023.tar.gz>

But iproute2's lib/ll_proto.c tries to use ETH_P_ECHO from linux/if_ether.h, and that manifest constant has (recently ?) been yanked?

Just remove the references to that ETH_P_ECHO constant in the iproute2 sources.

Later,
David S. Miller
[email protected]