glibc MIPS patch to check for binutils version...
Greetings.
Please find attached a patch to GLIBC that is compatible with the new version of binutils (HJLu's and CVS at least). I have also added some cruft in 'configure.in' that will produce warning messages if a user attempt to use old binutils. Comments are welcome. I have gone out on a limb and also included a Changelog entry in case this patch actually gets accepted :). This patch will apply against the CVS version of GLIBC. Please regenerate 'configure'. Thanks.
-Steve
***** Changelog entry *****
* sysdeps/mips/rtld-ldscript.in: removed unneeded binary output format directive
* configure.in: added in checking for obsolete binutils for MIPS targets which produces a warning message if user attempts to use older tools.
***************************
******* START PATCH *******
configure.in Thu May 10 23:09:24 2001 renamed from configure.in Wed Apr 25 16:50:58 2001 +8 -0
@@ -590,6 +590,29 @@ AC_SUBST(cross_compiling) AC_PROG_CPP LIBC_PROG_BINUTILS + +# For MIPS targets, we need to check that the proper version of +# binutils is being used and warn that old binary compatability +# may be broken. --sjhill +case "$host_alias" in +mips*-linux) + echo $ac_n "checking versions of GNU assembler and linker... $ac_c" 1>&6 + ac_prog_version=`$AS -o conftest -v </dev/null 2>&1 | sed -n 's/^.*version \(
[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 2.11.90.0.[5-9]*|2.11.[2-9]|2.1[2-9]*)
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac + echo "$ac_t""$ac_prog_version" 1>&6 + if test $ac_verc_fail = yes; then
+ echo "configure: warning:
+*** These are older versions of the GNU linker and assembler +*** for MIPS targets. You should seriously consider upgrading +*** your tools or risk producing incompatible binaries." 1>&2
+ fi
+esac
+
AC_CHECK_TOOL(MIG, mig)
# Accept binutils 2.10.1 or newer (and also any ia64 2.9 version)
diff -urN glibc-2.2.3/sysdeps/mips/rtld-ldscript.in glibc-2.2.3-patched/sysdeps/ mips/rtld-ldscript.in
sysdeps/mips/rtld-ldscript.in Fri May 11 06:34:52 2001 renamed from sysdeps/mips/rtld-ldscript.in Sat Jul 12 18:23:14 1997 +0 -1
@@ -1,4 +1,3 @@ -OUTPUT_FORMAT("@@rtld-oformat@@") OUTPUT_ARCH(@@rtld-arch@@) ENTRY(@@rtld-entry@@) SECTIONS
******* END PATCH *******
Signature · 4 lines
Steven J. Hill - Embedded SW Engineer Public Key: 'http://www.cotw.com/pubkey.txt' FPR1: E124 6E1C AF8E 7802 A815 FPR2: 7D72 829C 3386 4C4A E17D
Quoted 11 lines · Steven J. Hill
Greetings.
Please find attached a patch to GLIBC that is compatible with the new version of binutils (HJLu's and CVS at least). I have also added some cruft in 'configure.in' that will produce warning messages if a user attempt to use old binutils. Comments are welcome. I have gone out on a limb and also included a Changelog entry in case this patch actually gets accepted :). This patch will apply against the CVS version of GLIBC. Please regenerate 'configure'. Thanks.
Quoted 6 lines
-Steve
***** Changelog entry *****
* sysdeps/mips/rtld-ldscript.in: removed unneeded binary output format directive
Ok.
Quoted 4 lines
* configure.in: added in checking for obsolete binutils for MIPS targets which produces a warning message if user attempts to use older tools.
***************************
Let's do this differently. I'm appending a patch that does it more the "glibc way". I've committed everything to CVS including a patch for the FAQ. I hope I got the version numbers right.
Thanks,
Andreas
2001-05-11 Andreas Jaeger <[email protected]>
* sysdeps/unix/sysv/linux/configure.in: Check binutils version on MIPS.
============================================================
Index: sysdeps/unix/sysv/linux/configure.in
unix/sysv/linux/configure.in +11 -0
@@ -191,3 +191,14 @@ AC_MSG_RESULT(ok) fi fi + +case "$machine" in + mips*) + AC_CHECK_PROG_VER(AS, $AS, --version, + [GNU assembler.* \([0-9]*\.[0-9.]*\(-ia64-[0-9]*\)*\)], + [2.11.90.0.[5-9]* | 2.11.90.[1-9]* | 2.11.9[1-9]* | 2.11.[1-9]* | 2.1[2-9]*| 2.[2-9]*], + AC_MSG_WARN([*** Your binutils versions are too old. +*** We strongly advise to update binutils. For details check +*** the FAQ and INSTALL documents.])) + ;; +esac
Signature · 4 lines
Andreas Jaeger SuSE Labs [email protected] private [email protected] http://www.suse.de/~aj
Quoted 10 lines · Andreas Jaeger
Quoted 5 lines
* configure.in: added in checking for obsolete binutils for MIPS targets which produces a warning message if user attempts to use older tools.
***************************Let's do this differently. I'm appending a patch that does it more the "glibc way". I've committed everything to CVS including a patch for the FAQ. I hope I got the version numbers right.
Oh sure...my patch wasn't good enough :). I checked your addition to the FAQ and it is correct. Thanks a lot Andreas. Cheers.
-Steve
Signature · 4 lines
Steven J. Hill - Embedded SW Engineer Public Key: 'http://www.cotw.com/pubkey.txt' FPR1: E124 6E1C AF8E 7802 A815 FPR2: 7D72 829C 3386 4C4A E17D
Quoted 4 lines · Andreas Jaeger
2001-05-11 Andreas Jaeger <[email protected]>
* sysdeps/unix/sysv/linux/configure.in: Check binutils version on MIPS.
Wouldn't it be cleaner if the check was placed in
sysdeps/unix/sysv/linux/mips/configure.in instead, like it's done for Alpha?
Signature · 3 lines
+ Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: [email protected], PGP key available +
Quoted 10 lines · Maciej W. Rozycki
Quoted 4 lines · Andreas Jaeger
2001-05-11 Andreas Jaeger <[email protected]>
* sysdeps/unix/sysv/linux/configure.in: Check binutils version on MIPS.
Wouldn't it be cleaner if the check was placed in
sysdeps/unix/sysv/linux/mips/configure.in instead, like it's done for Alpha?
That would be better - I'll move it later,
Thanks,
Andreas
Signature · 4 lines
Andreas Jaeger SuSE Labs [email protected] private [email protected] http://www.suse.de/~aj
Quoted 3 lines · Steven J. Hill
***** Changelog entry *****
* sysdeps/mips/rtld-ldscript.in: removed unneeded binary output format directive
I don't believe those rtld-ldscript.in and rtld-parms are needed for the new MIPS toolchain at all. They may cause more trouble than without. Could you please tell me what breaks when you remove them? There is a chance that the old binaries compiled against glibc 2.0.x may run with the new glibc 2.2 without those linker scripts for the IRIX ABI.
H.J.