Skip to contentSkip to conversation

Boot Problem

DISCUSSION Patric Mrawek 4 participants 4 messages May 23, 2001 – May 24, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

sometimes one of my servers doesn't boot correctly. Lilo reads the kernel-image, but doesn't decompress it. So the system won't continue booting.

Looks like:
Loading linux...................
(at this point the machine freezes)

To be clear, most times it boots perfectly, but in 2 of 10 times it hangs.
I tried different versions of Lilo (21.4.4-13 and 21.7-5) without success.

The system is running Redhat 7.1 with the SGI XFS patches applied and the kernel is compressed with bzip.

[root@webtrends /root]# uname -a
Linux webtrends 2.4.2-SGI_XFS_1.0 #8 SMP Die Mai 22 10:27:24 CEST 2001 i686 unknown

The Hardware is: Tyan Thunder LE 2510UANG, 2*PIII-933, 1GB of Ram, Mylex AccelRAID 352 configured for RAID 5

Someone can give me a hint?

Regards,
Patric
--

Patric Mrawek, Networks & Security            fon : +49 721 9109 0
WEB Internet Services Systemhaus GmbH         fax : +49 721 9109 100
D-76135 Karlsruhe, Scheffelstr. 17a           http://www.punkt.de
#1 lore raw
Quoted 10 lines · Patric Mrawek

Hi,

sometimes one of my servers doesn't boot correctly. Lilo reads the kernel-image, but doesn't decompress it. So the system won't continue booting.

Looks like:
Loading linux...................
(at this point the machine freezes)

Our experience of this has been with suspect hardware. It was our first (pre-release) P4 system, so we puzzled over it for a short while; later testing on other P4 systems showed no such problem.

Signature · 1 line
David N. Lombard
#2 lore raw
Quoted 11 lines
Quoted 7 lines

sometimes one of my servers doesn't boot correctly. Lilo reads the kernel-image, but doesn't decompress it. So the system won't continue booting.

Looks like:
Loading linux...................
(at this point the machine freezes)

Our experience of this has been with suspect hardware. It was our first (pre-release) P4 system, so we puzzled over it for a short while; later testing on other P4 systems showed no such problem.

My machines have produced this result with memory sticks that needed to be reseated. Might make sure everything is seated down and all the contacts are clean.

Brent Norris

Executive Advisor -- WKU-Linux

System Administrator -- WKU-Center for Biodiversity
Best Mechanical

#3 lore raw
In reply to Patric Mrawek
Quoted 9 lines · David N. Lombard
Quoted 7 lines · Patric Mrawek

Hi,

sometimes one of my servers doesn't boot correctly. Lilo reads the kernel-image, but doesn't decompress it. So the system won't continue booting.

Quoted 8 lines
Quoted 3 lines

Looks like:
Loading linux...................
(at this point the machine freezes)

Our experience of this has been with suspect hardware. It was our first (pre-release) P4 system, so we puzzled over it for a short while; later testing on other P4 systems showed no such problem.

This could also be from disabling "VGA text console" support in the kernel. The last message you will see on the VGA console is the "Loading linux......." if you've disabled this feature.

However, if the problem is intermittent, this probably isn't the issue.

-Jeff

Signature · 2 lines
Jeff Golds
[email protected]