Skip to contentSkip to conversation

usb-ohci module from 2.4.5 kernel refuses to load on alpha, usb-ohci in a monolithic kernel refuses to recognize devices

DISCUSSION Pieter Barrezeele 1 participant 1 message May 27, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I'm having the following problem, when trying to load usb-ohci as a module:

        firmin:/usr/src/linux/drivers/usb# modprobe usb-ohci
        /lib/modules/2.4.5/kernel/drivers/usb/usb-ohci.o: init_module: No such device
        Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
        /lib/modules/2.4.5/kernel/drivers/usb/usb-ohci.o: insmod /lib/modules/2.4.5/kernel/drivers/usb/usb-ohci.o failed
        /lib/modules/2.4.5/kernel/drivers/usb/usb-ohci.o: insmod usb-ohci failed
        firmin:/usr/src/linux/drivers/usb#

Compiling this into the kernel doesn't seem to solve the problem as the bootstrap mentions:
usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings!

When browsing through arch/alpha/kernel/sys_miata.c, it seemed to me that there are no irq assignments to the usb subsystem.

Off the record, my system is a Digital Personal Workstation 500au. If you need more specs, do not hesitate to ask.

Pieter.

------------------------------------------------------------------------------
Pieter Barrezeele [email protected]
2e Lic Informatica KULeuven Ulyssis sysadmin, Linux enthousiast

Build a system even a fool can use, and only a fool will want to use it ...

------------------------------------------------------------------------------