Skip to contentSkip to conversation

addresses in xmon trace output?

DISCUSSION Steven Hanley 3 participants 5 messages Jun 28, 2001

lore
Share & tools
lore
#0 lore raw

All

what are the addresses you see in an xmon trace output? I had a crash yesterday with benh 2.4.6-pre3 (rsynced two days ago) where typing x in xmon didnt recover normal operation of the machine.

So the T command seemed to give some interesting numbers I assumed were addresses in the system map I could look up once I rebooted.

[11:35:34] 22 shiva sjh ~>cat mon_crash
c67b2098 c00e1bd8 c00e1080 c011f9df c00de590 c00de7ec c003b6a4 c0003b3c
exception:c00 [c67a1e90] fe0f640 feeff40 feeff44 fecef4f4 fecfd4c feca62c feaaab8 10001808 fd9675c 0
[11:35:47] 23 shiva sjh ~>for i in c67b2098 c00e1bd8 c00e1080 c011f9df c00de590 c00de7ec c003b6a4 c0003b3c ; do grep -i $i /boot/System.map-2.4.6-pre3 ; done c0003b3c T ret_from_syscall_1
[11:36:25] 24 shiva sjh ~>for i in fe0f640 feeff40 feeff44 fecef4f4 fecfd4c feca62c feaaab8 10001808 fd9675c ; do grep -i $i /boot/System.map-2.4.6-pre3 ; done [11:37:18] 25 shiva sjh ~>grep c67a1e90 /boot/System.map-2.4.6-pre3
[11:37:34] 26 shiva sjh ~>

so they are not addresses in there (well except possibly for the ret_from_syscall_1

This is on a pismo, the crash happened when I opened the lid (woke up form sleep) in X (4.1.0), the mosue wasnt appearing and I couldnt change desktops with the control arrow combo (sawfish) so I switched to console, then back to X, as I came back to X the xmon console appeared overwriting my X display.

I will see if this is reporducable tonight (currently I am running 2.4.4 benh as it doesnt exhibit this crash) as I expect to see paulus tonight so can maybe show him the xmon console after the crash and get hi mto look at it.

Anyway what are the addresses in the xmon trace?

See You
Steve

--
[email protected] http://wibble.net/~sjh/
Look Up In The Sky
Is it a bird? No
Is it a plane? No
Is it a small blue banana?
YES

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 19 lines · Steven Hanley

All

what are the addresses you see in an xmon trace output? I had a crash yesterday with benh 2.4.6-pre3 (rsynced two days ago) where typing x in xmon didnt recover normal operation of the machine.

So the T command seemed to give some interesting numbers I assumed were addresses in the system map I could look up once I rebooted.

[11:35:34] 22 shiva sjh ~>cat mon_crash
c67b2098 c00e1bd8 c00e1080 c011f9df c00de590 c00de7ec c003b6a4 c0003b3c
exception:c00 [c67a1e90] fe0f640 feeff40 feeff44 fecef4f4 fecfd4c feca62c feaaab8 10001808 fd9675c 0
[11:35:47] 23 shiva sjh ~>for i in c67b2098 c00e1bd8 c00e1080 c011f9df c00de590 c00de7ec c003b6a4 c0003b3c ; do grep -i $i /boot/System.map-2.4.6-pre3 ; done c0003b3c T ret_from_syscall_1
[11:36:25] 24 shiva sjh ~>for i in fe0f640 feeff40 feeff44 fecef4f4 fecfd4c feca62c feaaab8 10001808 fd9675c ; do grep -i $i /boot/System.map-2.4.6-pre3 ; done [11:37:18] 25 shiva sjh ~>grep c67a1e90 /boot/System.map-2.4.6-pre3
[11:37:34] 26 shiva sjh ~>

Quoted 2 lines

so they are not addresses in there (well except possibly for the ret_from_syscall_1

They're addresses all right. System.map lists the beginning of each function; those addresses will be somewhere in the middle. It's sorted; find the closest match before each.

--
Daniel Jacobowitz Carnegie Mellon University
MontaVista Software Debian GNU/Linux Developer

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 3 lines · Daniel Jacobowitz

They're addresses all right. System.map lists the beginning of each function; those addresses will be somewhere in the middle. It's sorted; find the closest match before each.

okay, that was easy, although the first address doesnt seem to be in the map anywhere, maybe I copied it down wrong I suppose.

[13:04:08] 30 shiva sjh ~>./findinsmap.pl /boot/System.map-2.4.6-pre3 c67b2098 c00e1bd8 c00e1080 c011f9df c00de590 c00de7ec c003b6a4 c0003b3c
Addr: c00e1bd8 A: c00e1aa8 B: c00e1cb0 Function: c00e1aa8 T alloc_skb
Addr: c00e1080 A: c00e1004 B: c00e1170 Function: c00e1004 T sock_alloc_send_skb
Addr: c011f9df A: c011f8b4 B: c011fc74 Function: c011f8b4 t unix_stream_sendmsg
Addr: c00de590 A: c00de4f4 B: c00de5c0 Function: c00de4f4 T sock_sendmsg
Addr: c00de7ec A: c00de758 B: c00de7fc Function: c00de758 t sock_write
Addr: c003b6a4 A: c003b5dc B: c003b6f0 Function: c003b5dc T sys_write
Addr: c0003b3c A: c0003b3c B: c0003bf0 Function: c0003b3c T ret_from_syscall_1

See You
Steve

--
[email protected] http://wibble.net/~sjh/
Look Up In The Sky
Is it a bird? No
Is it a plane? No
Is it a small blue banana?
YES

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#3 lore raw
In reply to Steven Hanley
Quoted 7 lines

what are the addresses you see in an xmon trace output? I had a crash yesterday with benh 2.4.6-pre3 (rsynced two days ago) where typing x in xmon didnt recover normal operation of the machine.

So the T command seemed to give some interesting numbers I assumed were addresses in the system map I could look up once I rebooted.

Paulus helped me fix a bug in the wakup code that could cause the kernel MMU mappings to be trashed (VSIDs initialized incorrectly) leading to all sort of crashes on wakeup and possibly bogus xmon output.

If you resync the tree, you should get the fix.

Ben.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#4 lore raw
Quoted 6 lines · Benjamin Herrenschmidt

Paulus helped me fix a bug in the wakup code that could cause the kernel MMU mappings to be trashed (VSIDs initialized incorrectly) leading to all sort of crashes on wakeup and possibly bogus xmon output.

If you resync the tree, you should get the fix.

thanks, paulus told me what to change in sleep.S a few hours ago. I will rsync again sometime tomorrow probably.

See You
Steve

--
[email protected] http://wibble.net/~sjh
Look Up In The Sky
Is it a bird? No
Is it a plane No
Is it a small blue banana?
Yes

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/