Skip to contentSkip to conversation

Kernel stack....

DISCUSSION Raghava Raju 4 participants 4 messages Sep 10, 2001 – Sep 11, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

1) I want to know what exactly is the structure
of kernel stack. Is it some thing like bss,data,text?

2) I want to access kernel stack(in kernel
mode). So I am using kernel stack pointer provided in thread_struct. So how to access different areas(.i.e data,text) in kernel stack.

Any pointers will be helpful.

Please mail me as I did't subscribe.
[email protected]

Thank you.
Raj.

__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com

#1 lore raw
Quoted 7 lines · Raghava Raju

1) I want to know what exactly is the structure
of kernel stack. Is it some thing like bss,data,text?

2) I want to access kernel stack(in kernel
mode). So I am using kernel stack pointer provided in thread_struct. So how to access different areas(.i.e data,text) in kernel stack.

I think you got a wrong understanding of the stack. The stack has no separate bss, data, and text sections, it's just a stack of function arguments, local variables, and return addresses.

Accessing the stack works automatically: call a function, and the function paramaters and the return address are pushed on the stack. Unless you have a *very* good reason, there is no need to manipulate the stack directly in kernel mode.

Erik

PS: Please don't cross post between the kernelniewbes and linux-kernel
lists, use only one of them next time (kernelnewbies is good for this kind of questions).

Signature · 5 lines
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031,  2600 GA Delft, The Netherlands
Phone: +31-15-2783635  Fax: +31-15-2781843  Email: [email protected]
WWW: http://www-ict.its.tudelft.nl/~erik/
#2 lore raw
In reply to Raghava Raju
Quoted 7 lines · Erik Mouw

I think you got a wrong understanding of the stack. The stack has no separate bss, data, and text sections, it's just a stack of function arguments, local variables, and return addresses.

Accessing the stack works automatically: call a function, and the function paramaters and the return address are pushed on the stack.

Yes but there is one stack per processor ? And what about its maximum size ? Is it dynamical ?

-Manu

#3 lore raw
In reply to Raghava Raju
Quoted 13 lines · Raghava Raju

Hi,

1) I want to know what exactly is the structure
of kernel stack. Is it some thing like bss,data,text?

2) I want to access kernel stack(in kernel
mode). So I am using kernel stack pointer provided in thread_struct. So how to access different areas(.i.e data,text) in kernel stack.

Quoted 7 lines

Any pointers will be helpful.

Please mail me as I did't subscribe.
[email protected]

Thank you.
Raj.

I am assuming that you want to know how parameters loaded on the stack are passed to called procedures, i.e., the offset. I assume that you know that the kernel stack is just like a user stack and you don't actually manipulate it directly.

Given:

	procedure(one, two, three);

where one, two, and three are values of any size up to the length of a register..

The called procedure gets the values as:

	0x04(%esp) = one
	0x08(%esp) = two
	0x0c(%esp) = three

If, and only if, no registers are saved on the called procedure's stack. If some register(s) have been saved, the parameters are offset by the length of the register(s)...

proc: pushl %ebx

	pushl	%ecx
	pushl	%edx
	pushl	%edi			# 4 * 4 = 0ffset 16
	movl	0x14(%esp), %ebx	# One
	movl	0x18(%esp), %ecx	# Two
	movl	0x1c(%esp), %edx	# Three

Cheers,
Dick Johnson

Penguin : Linux version 2.4.1 on an i686 machine (799.53 BogoMips).

I was going to compile a list of innovations that could be attributed to Microsoft. Once I realized that Ctrl-Alt-Del was handled in the BIOS, I found that there aren't any.