how to get cpu_khz?
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · David Fries
I'm using the TSC of the Pentium processors to get some precise timing delays for writing to a eeprom (bit banging bus operations), and it works just fine, but the
cpu_khzvariable isn't exported to a kernel module, so I hardcoded in my module. It works fine for that one system, but obviously I don't want to hard code it for the general case. I guess I could write my own routine to figure out what thecpu_khzis, but it is already done, so how do I get access to it?
I don't know of any official way of doing this, but here's some code (written by aa) that accomplishes this.
/*
* $Id: MHz.c,v 1.4 2001/05/21 18:58:01 davej Exp $ * This file is part of x86info. * (C) 2001 Dave Jones.
*
* Licensed under the terms of the GNU GPL License version 2. *
* Estimate CPU MHz routine by Andrea Arcangeli <[email protected]>
* Small changes by David Sterba <[email protected]> *
*/
#include <stdio.h>
#include <sys/time.h>
#include <string.h>
#include <unistd.h>
__inline__ unsigned long long int rdtsc()
{
unsigned long long int x;
__asm__ volatile (".byte 0x0f, 0x31" : "=A" (x));
return x;
}void estimate_MHz()
{
struct timezone tz;
struct timeval tvstart, tvstop;
unsigned long long int cycles[2]; /* gotta be 64 bit */
unsigned int microseconds; /* total time taken */
memset(&tz, 0, sizeof(tz));
/* get this function in cached memory */
gettimeofday(&tvstart, &tz);
cycles[0] = rdtsc();
gettimeofday(&tvstart, &tz);
/* we don't trust that this is any specific length of time */
usleep(1000000);
cycles[1] = rdtsc();
gettimeofday(&tvstop, &tz);
microseconds = ((tvstop.tv_sec-tvstart.tv_sec)*1000000) +
(tvstop.tv_usec-tvstart.tv_usec);
printf("%lldMHz processor (estimate).\n",
(cycles[1]-cycles[0])/microseconds);
}int main(void)
{
while (1) {
estimate_MHz();
}
return (0);
}Quoted 10 lines · John Weber
Quoted 8 lines · David Fries
I'm using the TSC of the Pentium processors to get some precise timing delays for writing to a eeprom (bit banging bus operations), and it works just fine, but the
cpu_khzvariable isn't exported to a kernel module, so I hardcoded in my module. It works fine for that one system, but obviously I don't want to hard code it for the general case. I guess I could write my own routine to figure out what thecpu_khzis, but it is already done, so how do I get access to it?
Quoted 2 lines
I don't know of any official way of doing this, but here's some code (written by aa) that accomplishes this.
For a user space program you could just read /proc/cpuinfo, I'm actually writing a kernel driver, maybe I wasn't clear enough. I'm just frustrated because the variable I'm after, cpu_khz is already calculated at boot time (that's where /proc/cpuinfo gets its data) and that variable doesn't appear to be exported to the rest of the kernel, either that or I'm just missing something, which I would rather be the case at this point.
Signature · 4 lines
+---------------------------------+ | David Fries | | [email protected] | +---------------------------------+
Quoted 14 lines · David Fries
Quoted 10 lines · John Weber
Quoted 8 lines · David Fries
I'm using the TSC of the Pentium processors to get some precise timing delays for writing to a eeprom (bit banging bus operations), and it works just fine, but the
cpu_khzvariable isn't exported to a kernel module, so I hardcoded in my module. It works fine for that one system, but obviously I don't want to hard code it for the general case. I guess I could write my own routine to figure out what thecpu_khzis, but it is already done, so how do I get access to it?Quoted 2 lines
I don't know of any official way of doing this, but here's some code (written by aa) that accomplishes this.
Quoted 8 lines
For a user space program you could just read
/proc/cpuinfo, I'm actually writing a kernel driver, maybe I wasn't clear enough. I'm just frustrated because the variable I'm after,cpu_khzis already calculated at boot time (that's where/proc/cpuinfogets its data) and that variable doesn't appear to be exported to the rest of the kernel, either that or I'm just missing something, which I would rather be the case at this point.
Ask Alan to export it by default. If no-go, export it in your configuration.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.1 on an i686 machine (799.53 BogoMips).
I was going to compile a list of innovations that could be attributed to Microsoft. Once I realized that Ctrl-Alt-Del was handled in the BIOS, I found that there aren't any.
Quoted 8 lines
Quoted 5 lines
calculated at boot time (that's where
/proc/cpuinfogets its data) and that variable doesn't appear to be exported to the rest of the kernel, either that or I'm just missing something, which I would rather be the case at this point.Ask Alan to export it by default. If no-go, export it in your configuration.
Processor speed from cpu_khz is not a constant, it varies per processor on split multiplier SMP and it varies on certain kinds of power management. For delays we have udelay(). That has a chance of supporting speed changes