Skip to contentSkip to conversation

Athlon bug stomper. Pls apply.

PATCH Petr Vandrovec 6 participants 7 messages Sep 19, 2001 – Sep 21, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · Liakakis Kostas

It seems to fix the stability problem. We don;t know why, but experimetation shows that those _with_ the problem are relieved. This is fine! We are happy with it.

We write to a register marked as "don't write" by Via. This is potentialy dangerous in ways we don't know yet.

Just small question - you are saying that your KT133A works fine with 0x89... Two questions then - Do you have more than 256MB in your box? And second one: Do you have one, two, or three memory modules installed on the board?

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...
Thanks,
Petr Vandrovec [email protected]

#1 lore raw
Quoted 3 lines · Petr Vandrovec

Just small question - you are saying that your KT133A works fine with 0x89... Two questions then - Do you have more than 256MB in your box?

Right.

Quoted 2 lines

And second one: Do you have one, two, or three memory modules installed on the board?

3 x 256MB double sided, unbuffered and -guess what- no-name.

Quoted 4 lines

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...

/me hopes too.

-K.

#2 lore raw
In reply to Petr Vandrovec

Hi!

Quoted 4 lines

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...

Not exactly. I can report about two different machines - my home one, and one here at workplace - which hit this bug. Linux even does not start on them with 3R. Both of them have got 256 Mb, one module. This fix helps for both of them.

Gergely

ps: ABIT KT7A, Duron 750MHz, 256Mb (one module)

#3 lore raw

3R was not working for me too, 3C is well working, actually.

Luigi

Quoted 22 lines · Gergely Tamas

Hi!

Quoted 4 lines

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...

Not exactly. I can report about two different machines - my home one, and one here at workplace - which hit this bug. Linux even does not start on them with 3R. Both of them have got 256 Mb, one module. This fix helps for both of them.

Gergely

ps: ABIT KT7A, Duron 750MHz, 256Mb (one module)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw
In reply to Petr Vandrovec
Quoted 14 lines · Petr Vandrovec
Quoted 7 lines · Liakakis Kostas

It seems to fix the stability problem. We don;t know why, but experimetation shows that those _with_ the problem are relieved. This is fine! We are happy with it.

We write to a register marked as "don't write" by Via. This is potentialy dangerous in ways we don't know yet.

Just small question - you are saying that your KT133A works fine with 0x89... Two questions then - Do you have more than 256MB in your box? And second one: Do you have one, two, or three memory modules installed on the board?

Quoted 4 lines

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...

Just to add a curiosity. Abit KT7A MBs do not accept all 256 MB modules. with some of them they do see just 128 MB, and anyway systems are stable, but of course systems managers get unhappy.
This should be because of modules density...

OK, this was OT but maybe some of you had this experience.

Luigi

#5 lore raw
In reply to Petr Vandrovec
Quoted 4 lines · Luigi Genoni

Just to add a curiosity. Abit KT7A MBs do not accept all 256 MB modules. with some of them they do see just 128 MB, and anyway systems are stable, but of course systems managers get unhappy.
This should be because of modules density...

bx chipsets have a limitation of 128mb per bank for non-registered dimms afaik. ie. 256mb dimms that are two-bank will work as expected, and 256mb dimms that are one-bank will be seen as 128mb. generally two-bank 256mb dimms have chips on both sides of the module, whereas one-bank jobbies have it on one side... found this out the expensive way :-(

of course this isnt relevant to abit kt7 boards but it does sound very similar.

j.

Signature · 2 lines
R N G G   "Well, there it goes again... And we just sit 
 I G G G   here without opposable thumbs." -- gary larson
#6 lore raw
In reply to Petr Vandrovec

BTW ...
When I switched to Duron with a new (well, it was my friend's) motherboard
(according to lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)), I can't boot Linux anymore since it stucked around partiotion checking (sorry
I don't remember, but I can check on the next week). It was kernel 2.2.19.
2.4.x works without any problem, the last kernel I've checked (and using now)
is 2.4.9. Is it the same problem?

Quoted 27 lines · Petr Vandrovec
Quoted 7 lines · Liakakis Kostas

It seems to fix the stability problem. We don;t know why, but experimetation shows that those _with_ the problem are relieved. This is fine! We are happy with it.

We write to a register marked as "don't write" by Via. This is potentialy dangerous in ways we don't know yet.

Just small question - you are saying that your KT133A works fine with 0x89... Two questions then - Do you have more than 256MB in your box? And second one: Do you have one, two, or three memory modules installed on the board?

If your answer is <=256MB, one module, no surprise then, as AFAIK nobody with such config suffers from the problem. But checking also number of memory modules looks more like black magic that anything else. Hopefully VIA will answer...
Thanks,
Petr Vandrovec [email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 3 lines
 --[ Gábor Lénárt ]---[ Vivendi Telecom Hungary ]---------[ [email protected] ]--
 U have 8 bit comp or chip of them and it's unused or to be sold? Call me!
 -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]-----