Skip to contentSkip to conversation

2.4.11-pre6

DISCUSSION Klaus Dittrich 2 participants 2 messages Oct 9, 2001

lore
Share & tools
lore
#0 lore raw

dd and mkfs works with 2.4.3 but not with 2.4.11.x or 2.4.10.x

dd if=/dev/sda of=/dev/sdb bs=1024k or mkfs /dev/sdb3
both fail with "File size limit exceeded"

Booting the same system with 2.4.3 or 2.2.19 anything works as expected.

So is the problem with the kernel (as I assume) or do I miss something ?

Can anyone else please verify this ?

(One really needs two disks, dd if=/dev/sda of=/dev/null does not show the problem)

Signature · 4 lines
Best regards
Klaus Dittrich

e-mail: [email protected]
#1 lore raw

Almost a me too:

On a Compaq Armada 1750 with 2.4.3-20mdk (as installed from Mandrake 8.0):

dd if=/boot/grub/stage1 of=/dev/fd0 bs=512 seek=1
reports back: dd: /dev/fd0: Invalid argument

On the same laptop with 2.4.11-pre5 the same command barfs with:
dd: /dev/fd0: Permission denied

On a P180 w/ 2.4.10-pre13: dd: /dev/fd0: Permission denied

In the first kernel the floppy driver is compiled as a module. Without the seek=1 (or whatever number there) it works in all cases.

I thought it was something that had to do with my drives but seeing your report makes me wonder. Perhaps sombody more knowledgeable can comment...

-K.

Quoted 27 lines · Klaus Dittrich

dd and mkfs works with 2.4.3 but not with 2.4.11.x or 2.4.10.x

dd if=/dev/sda of=/dev/sdb bs=1024k or mkfs /dev/sdb3
both fail with "File size limit exceeded"

Booting the same system with 2.4.3 or 2.2.19 anything works as expected.

So is the problem with the kernel (as I assume) or do I miss something ?

Can anyone else please verify this ?

(One really needs two disks, dd if=/dev/sda of=/dev/null does not show the problem)

Signature · 9 lines
Best regards
Klaus Dittrich

e-mail: [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/