Skip to contentSkip to conversation

SBS Palomar II/IV/V port

DISCUSSION Val Henson 5 participants 8 messages Oct 10, 2001 – Oct 12, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Val Henson

author
#1 lore raw
Quoted 1 line · Michael Sokolov

Some other bi_rec fixes may be needed (initrd ones are broken I think).

Indeed! This is on my list of stuff to do - straighten out once and for all how BI_INITRD works and then rewrite the Gemini boot process to use it. It seemed like we had two interpretations:

1. The BI_INITRD boot record contains the start address and the size of the initrd.

2. The BI_INITRD boot record contains the entire initrd itself (as a really large boot record).

I have no preference either way, I just want someone to tell me which way we're going to do it. :)

-VAL

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 5 lines

Indeed! This is on my list of stuff to do - straighten out once and for all how BI_INITRD works and then rewrite the Gemini boot process to use it. It seemed like we had two interpretations:

Quoted 8 lines

1. The BI_INITRD boot record contains the start address and the size of the initrd.

2. The BI_INITRD boot record contains the entire initrd itself (as a really large boot record).

I have no preference either way, I just want someone to tell me which way we're going to do it. :)

We can very easily support both ways. In the first case, we should also clearly comment the fact that the pointer passed to the kernel is physical.

I'll eventually push some code in the upcoming 1 or 2 days that does the kernel-side of getting passed pointer-based birecs. I will eventually throw in a couple of new birec definitions as well.

Ben.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#3 lore raw
Quoted 4 lines · Benjamin Herrenschmidt

I'll eventually push some code in the upcoming 1 or 2 days that does the kernel-side of getting passed pointer-based birecs. I will eventually throw in a couple of new birec definitions as well.

Can we please not commit this just yet? 2.5 will open up soon hopefully... Maybe after 2.4.12 or so. I think it would be a bad thing to put this in the 2_4 trees (either of 'em) inititally. Throwing around patches tho would be good. :)

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#4 lore raw
In reply to Val Henson
Quoted 8 lines · Val Henson

1. The BI_INITRD boot record contains the start address and the size of the initrd.

2. The BI_INITRD boot record contains the entire initrd itself (as a really large boot record).

I have no preference either way, I just want someone to tell me which way we're going to do it. :)

I think 1 is preferable, if you have 1 you can actually do 2 as well in fact (just have a large record with an address/size record at the front with the address pointing into the record).

Paul.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#5 lore raw
In reply to Val Henson
Quoted 9 lines · Val Henson
Quoted 1 line · Michael Sokolov

Some other bi_rec fixes may be needed (initrd ones are broken I think).

Indeed! This is on my list of stuff to do - straighten out once and for all how BI_INITRD works and then rewrite the Gemini boot process to use it. It seemed like we had two interpretations:

Quoted 5 lines

1. The BI_INITRD boot record contains the start address and the size of the initrd.

2. The BI_INITRD boot record contains the entire initrd itself (as a really large boot record).

I thought we had agreed on 1 (and nothing uses it yet anyhow). Tho my memory could be hazy.

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#6 lore raw

On Wed, Oct 10, 2001 at 06:06:22PM -0700, Tom Rini wrote:
: > 1. The BI_INITRD boot record contains the start address and the size
: > of the initrd.
: >
: > 2. The BI_INITRD boot record contains the entire initrd itself (as a
: > really large boot record).
:
: I thought we had agreed on 1 (and nothing uses it yet anyhow). Tho my : memory could be hazy.

This was my understanding as well of the earlier conversations, so this is what I used to implement zImage.initrd for ppc64. Hopefully everyone remembers this not only affects the ppc32 kernel, but also affects the ppc64 kernel as well.

Peter

--
Peter Bergner
SLIC Optimizing Translator Development / Linux PPC64 Kernel Development IBM Rochester, MN
[email protected]

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#7 lore raw
In reply to Val Henson
Quoted 11 lines · Val Henson
Quoted 1 line · Michael Sokolov

Some other bi_rec fixes may be needed (initrd ones are broken I think).

Indeed! This is on my list of stuff to do - straighten out once and for all how BI_INITRD works and then rewrite the Gemini boot process to use it. It seemed like we had two interpretations:

1. The BI_INITRD boot record contains the start address and the size of the initrd.

Okay, does the following look right/work for everyone? (With a similar change to arch/ppc64/kernel/setup.c).

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

===== arch/ppc/kernel/setup.c 1.60 vs edited =====

arch/ppc/kernel/setup.c +1 -1
@@ -496,7 +496,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 		case BI_INITRD:
 			initrd_start = data[0];
-			initrd_end = data[0] + rec->size;
+			initrd_end = data[0] + data[1];
 			break;
 #endif /* CONFIG_BLK_DEV_INITRD */
 #ifdef CONFIG_ALL_PPC

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#8 lore raw

: Okay, does the following look right/work for everyone? (With a similar : change to arch/ppc64/kernel/setup.c).
:
: ===== arch/ppc/kernel/setup.c 1.60 vs edited =====
: --- 1.60/arch/ppc/kernel/setup.c Thu Sep 27 09:01:14 2001
: +++ edited/arch/ppc/kernel/setup.c Thu Oct 11 16:15:45 2001
: @@ -496,7 +496,7 @@

:  #ifdef CONFIG_BLK_DEV_INITRD
:  		case BI_INITRD:
:  			initrd_start = data[0];
: -			initrd_end = data[0] + rec->size;
: +			initrd_end = data[0] + data[1];
:  			break;
:  #endif /* CONFIG_BLK_DEV_INITRD */
:  #ifdef CONFIG_ALL_PPC

That's one of the changes I already have for PPC64, so looks good to me too.

Peter

--
Peter Bergner
SLIC Optimizing Translator Development / Linux PPC64 Kernel Development IBM Rochester, MN
[email protected]

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/