2.4.13pre3aa1
Only in 2.4.13pre2aa1: 00_lvm-1.0.1-rc4-1.bz2 Only in 2.4.13pre3aa1: 00_lvm-1.0.1-rc4-2.bz2
Rediffed merging the unsigned long change in the blkdev size ioctl.
Only in 2.4.13pre2aa1: 00_vm-3.1
Only in 2.4.13pre3aa1: 00_vm-3.2
Further vm minor updates. In particular make sure not to overstimate the amount of buffers available during balance_dirty(), by using the exact per-classzone active/inactive info.
Only in 2.4.13pre2aa1: 50_uml-patch-2.4.12-1-1.bz2 Only in 2.4.13pre3aa1: 50_uml-patch-2.4.12-3-1.bz2
Latest update from Jeff.
Only in 2.4.13pre2aa1: 60_tux-2.4.10-ac10-F5.bz2 Only in 2.4.13pre3aa1: 60_tux-2.4.10-ac12-H1.bz2
Latest update from Ingo.
Andrea
Quoted 15 lines · Andrea Arcangeli
Only in 2.4.13pre2aa1: 00_lvm-1.0.1-rc4-1.bz2 Only in 2.4.13pre3aa1: 00_lvm-1.0.1-rc4-2.bz2
Rediffed merging the unsigned long change in the blkdev size ioctl.
Only in 2.4.13pre2aa1: 00_vm-3.1
Only in 2.4.13pre3aa1: 00_vm-3.2Further vm minor updates. In particular make sure not to overstimate the amount of buffers available during
balance_dirty(), by using the exact per-classzone active/inactive info.Only in 2.4.13pre2aa1: 50_uml-patch-2.4.12-1-1.bz2 Only in 2.4.13pre3aa1: 50_uml-patch-2.4.12-3-1.bz2
Quoted 8 lines
Latest update from Jeff.
Only in 2.4.13pre2aa1: 60_tux-2.4.10-ac10-F5.bz2 Only in 2.4.13pre3aa1: 60_tux-2.4.10-ac12-H1.bz2
Latest update from Ingo.
Andrea
I was expecting a more serious bug-fix. I recently upgraded my kernel from 2.4.11pre1 to 2.4.13-pre2aa1. Now anacron "kill"s the machine every morning by starting updatedb. Basicly everything swaps out. If I don't touch the mouse for 3 seconds, it will take 15 seconds to respond next time I touch it. Switching between desktops in KDE, takes from 3 to 10 minutes, and updatedb never seems to complete, I have had to kill it manually every time so far. I had similar problems every morning with 2.4.9 although not as bad, but I havent seen them before in 2.4.10 and later.
The problem is easily replicable, I just need to run updatedb. Would you like some statistics and which?
regards
`Allan
Quoted 5 lines · On Tue, 16 Oct 2001 14:30:43 +0200 Allan Sandfeld <[email protected]> wrote:
I was expecting a more serious bug-fix. I recently upgraded my kernel from 2.4.11pre1 to 2.4.13-pre2aa1. Now anacron "kill"s the machine every morning by starting updatedb. Basicly everything swaps out. If I don't touch the mouse for 3 seconds, it will take 15 seconds to respond next time I touch it.
Quoted 7 lines
Switching between desktops in KDE, takes from 3 to 10 minutes, and updatedb never seems to complete, I have had to kill it manually every time so far. I had similar problems every morning with 2.4.9 although not as bad, but I havent seen them before in 2.4.10 and later.
The problem is easily replicable, I just need to run updatedb. Would you likesome statistics and which?
That would be really interesting. If you want to have a look:
admin:/etc # cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 922664960 882900992 39763968 0 104587264 214876160 Swap: 271392768 0 271392768 MemTotal: 901040 kB MemFree: 38832 kB MemShared: 0 kB Buffers: 102136 kB Cached: 209840 kB SwapCached: 0 kB Active: 40252 kB Inactive: 271724 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 901040 kB LowFree: 38832 kB SwapTotal: 265032 kB SwapFree: 265032 kB
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/sda3 6297280 5941616 355664 95% / /dev/sda2 31111 25873 3632 88% /boot /dev/hda1 20043416 19405616 637800 97% /p3 /dev/sda4 29245432 27529888 1715544 95% /p2
shmfs 450520 0 450520 0% /dev/shm
admin:/ # time updatedb --localpaths="/ /p2 /p3"
real 0m19.197s user 0m15.440s sys 0m5.260s
admin:/etc # ls -l /var/lib/locatedb
-rw-r--r-- 1 root root 5321293 Oct 16 15:13 /var/lib/locatedb
admin:/etc # uname -r
2.4.13-pre2
3:14pm up 2 days, 18:15, 24 users, load average: 1.16, 1.10, 1.04
119 processes: 117 sleeping, 2 running, 0 zombie, 0 stopped
CPU0 states: 54.5% user, 2.4% system, 53.0% nice, 42.4% idle CPU1 states: 45.0% user, 1.1% system, 45.1% nice, 53.1% idle Mem: 901040K av, 847480K used, 53560K free, 0K shrd, 90544K buff Swap: 265032K av, 0K used, 265032K free 206296K cached
On my system I cannot see anything the like. Look at the execution time. Ok, I must admit: I do not use brain-dead K stuff (warning: this is a very personal opinion, don't flame me here :-).
What does your setup look like? Have you ever tested without K?
Regards,
Stephan
Quoted 7 lines · you
On my system I cannot see anything the like. Look at the execution time. Ok, I must admit: I do not use brain-dead K stuff (warning: this is a very personal opinion, don't flame me here :-).
What does your setup look like? Have you ever tested without K?
No, I havent tried it without K. The system is quite responsive if I only run updatedb, and swap around in either text-linux or a simple X setup. When looking closer at the problem, it is the combination of running kmail with HUGE folders (think linux-kernel archive), apt-get and anacron that thrashes the system. All of these have a "relative" low impact when running alone or two and two.
It might be "what you expect" abusing the system like that. But as I said, it is not a problem in 2.4.11-pre1 and 2.4.12-ac3.
Princess:/home# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 196304896 192466944 3837952 0 1327104 33628160
Swap: 255426560 64491520 190935040
MemTotal: 191704 kB
MemFree: 3748 kB
MemShared: 0 kB
Buffers: 1296 kB
Cached: 28196 kB
SwapCached: 4644 kB
Active: 23344 kB
Inactive: 10792 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 191704 kB
LowFree: 3748 kB
SwapTotal: 249440 kB
SwapFree: 186460 kBPrincess:/proc# uname -r 2.4.13-pre2
Princess:/proc# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda3 18975356 9843804 8167652 55% / /dev/hda1 7318 7241 0 100% /boot
15:52:56 up 1:03, 2 users, load average: 3.44, 3.95, 3.16
90 processes: 86 sleeping, 2 running, 2 zombie, 0 stopped
CPU states: 23.7% user, 3.4% system, 0.0% nice, 73.0% idle Mem: 191704K total, 188024K used, 3680K free, 2652K buffers Swap: 249440K total, 61744K used, 187696K free, 21268K cached
Does all this help you?
Notice this is not worst case, just what I could reproduce by starting updatedb and checksecurity while answering your mail. Switchtime from desktop to desktop is 1 minute.
`Allan
Quoted 46 lines · On Tue, 16 Oct 2001 15:55:27 +0200 Allan Sandfeld <[email protected]> wrote:
Quoted 7 lines · you
On my system I cannot see anything the like. Look at the execution time. Ok, I must admit: I do not use brain-dead K stuff (warning: this is a very personal opinion, don't flame me here :-).
What does your setup look like? Have you ever tested without K?
No, I havent tried it without K. The system is quite responsive if I only run
updatedb, and swap around in either text-linux or a simple X setup. When looking closer at the problem, it is the combination of running kmail with HUGE folders (think linux-kernel archive), apt-get and anacron that thrashes the system. All of these have a "relative" low impact when running alone or two and two.
It might be "what you expect" abusing the system like that. But as I said, itis not a problem in 2.4.11-pre1 and 2.4.12-ac3.
Princess:/home# cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 196304896 192466944 3837952 0 1327104 33628160 Swap: 255426560 64491520 190935040 MemTotal: 191704 kB MemFree: 3748 kB MemShared: 0 kB Buffers: 1296 kB Cached: 28196 kB SwapCached: 4644 kB Active: 23344 kB Inactive: 10792 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 191704 kB LowFree: 3748 kB SwapTotal: 249440 kB SwapFree: 186460 kBPrincess:/proc# uname -r 2.4.13-pre2Princess:/proc# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda3 18975356 9843804 8167652 55% / /dev/hda1 7318 7241 0 100% /boot
Quoted 8 lines
15:52:56 up 1:03, 2 users, load average: 3.44, 3.95, 3.16
90 processes: 86 sleeping, 2 running, 2 zombie, 0 stoppedCPU states: 23.7% user, 3.4% system, 0.0% nice, 73.0% idle Mem: 191704K total, 188024K used, 3680K free, 2652K buffers Swap: 249440K total, 61744K used, 187696K free, 21268K cachedDoes all this help you?
Hm, from looking at the presented numbers I tend to believe that you are driving this system up to the limits. Very possible that ac kernels deal a bit better with the situation because of neat swap-management. But very much of your mem is really used by appilcations and very few (in comparison) is used by page cache, so there is not really much room to play with. If I were to give advice, I'd either
a) buy mem (something like additional 256 MB)
or
b) throw away K, and replace by more resource-conscious stuff like wm, or/and an acceptable mail-client like sylpheed.
Both would do quantum-leaps in your configuration, compared to very small playground left for vm treatment. Whatever is swapped could be the wrong thing, depending on your further actions.
Try it and compare the time and memory consumption for:
a) Startup
b) Exit
c) Starting your mail-client
d) updatedb
with K and with wm (just to mention a nice example)
Quoted 4 lines
Notice this is not worst case, just what I could reproduce by starting updatedb and checksecurity while answering your mail. Switchtime from desktop
to desktop is 1 minute.
Sure. I would say it swaps the hell out. K tends to be the wrong choice in a less-than-completely-oversized system. As I said, Riks vm may help you _this time_. But possibly only up to the next K release, where everything is again slower, bigger and more unstable. Solve the problem, do not maneuver around it.
Just my personal opinion.
Regards,
Stephan
And here's the last one:
Princess:/# time updatedb updatedb 46,95s user 8,56s system 3% cpu 24:20,55 total
Quoted 12 lines · Stephan von Krawczynski
Hm, from looking at the presented numbers I tend to believe that you are driving this system up to the limits. Very possible that ac kernels deal a bit better with the situation because of neat swap-management. But very much of your mem is really used by appilcations and very few (in comparison) is used by page cache, so there is not really much room to play with. If I were to give advice, I'd either
a) buy mem (something like additional 256 MB)
or
b) throw away K, and replace by more resource-conscious stuff like wm, or/and an acceptable mail-client like sylpheed.
Both would do quantum-leaps in your configuration, compared to very small
Quoted 8 lines
playground left for vm treatment. Whatever is swapped could be the wrong thing, depending on your further actions.
Try it and compare the time and memory consumption for:
a) Startup
b) Exit
c) Starting your mail-client
d) updatedb
with K and with wm (just to mention a nice example)
e) Just hope the bug is already fixed
On a suggestion from Luigi Genoni I tried 2.4.13-pre3aa1. The problem IS infact fixed. From a subjective point of view I would again claim the Andrea VM leaves the system much more responsive when updatedb is running than the VM in 2.4.12-ac3.
Nice!! :)
Regards.
`Allan