USB, Palm M500, Coldsync
Hi,
Coldsync segfaults after a successful hotsync with my Palm M500 which is connected using the USB Cradle. It also generates a oops. I hope the following info is enough to fix this problem.
Distribution: Debian(sid) w/ Coldsync (coldsync-2.2.2-20011012.tar.gz)
]------------------------[uname -ar]-----------------------------------------[ Linux version 2.4.12-ac5 (root@joanne) (gcc version 2.95.4 20011006 (Debian prer elease)) #8 Mon Oct 22 09:27:00 CEST 2001
]------------------------[OOPS]----------------------------------------------[ ksymoops 2.4.3 on i586 2.4.12-ac5. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.12-ac5/ (default)
-m /boot/System.map-2.4.12-ac5 (default)
Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_system_map stat /boot/System.map-2.4.12-ac5 failed c01f0ae0
*pde = 00000000
Oops: 0000 CPU: 0 EIP: 0010:[<c01f0ae0>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210286
eax: 0000001f ebx: c9c70894 ecx: c6de7000 edx: ffffffff
esi: c6de7380 edi: c9c70800 ebp: c9c708f0 esp: c3b3ded0
ds: 0018 es: 0018 ss: 0018
Process coldsync (pid: 3533, stackpage=c3b3d000)
Stack: c01fc376 ffffffff c9c70894 c9c70800 c6f87c60 00000000 c01fa900 c9c70894
c6f87c60 c2564000 c23a4ac0 c13162a0 c0191e60 c2564000 c6f87c60 c6f87c60
c23a4ac0 c13162a0 c6f19aa0 00000001 c3b3c000 0a19576e 00000000 00200286
Call Trace: [<c01fc376>] [<c01fa900>] [<c0191e60>] [<c01957f0>] [<c0192481>]
[<c012f0a0>] [<c012e23b>] [<c012e287>] [<c0106b23>]
Code: 8b 42 14 85 c0 74 19 8b 80 bc 00 00 00 8b 40 18 52 8b 40 10 Quoted 1 line
Quoted 1 line
EIP;
c01f0ae0<usb_unlink_urb+8/270> <=====
Trace; c01fc376 <usb_serial_deregister+2b2/efc>
Trace; c01fa900 <usb_reset_device+6aa0/822c>
Trace; c0191e60 <tty_hung_up_p+bc0/1ca8>
Trace; c01957f0 <tty_unregister_driver+2464/2594>
Trace; c0192480 <tty_hung_up_p+11e0/1ca8>
Trace; c012f0a0 <fput+38/c0>
Trace; c012e23a <filp_close+5a/64>
Trace; c012e286 <sys_close+42/84>
Trace; c0106b22 <__up_wakeup+105e/2644>
Code; c01f0ae0 <usb_unlink_urb+8/270>
00000000 <_EIP>:
Code; c01f0ae0 <usb_unlink_urb+8/270> <=====
0: 8b 42 14 mov 0x14(%edx),%eax <=====
Code; c01f0ae2 <usb_unlink_urb+a/270>
3: 85 c0 test %eax,%eax
Code; c01f0ae4 <usb_unlink_urb+c/270>
5: 74 19 je 20 <_EIP+0x20> c01f0b00 <usb_unlink_urb+28/270>
Code; c01f0ae6 <usb_unlink_urb+e/270>
7: 8b 80 bc 00 00 00 mov 0xbc(%eax),%eax
Code; c01f0aec <usb_unlink_urb+14/270>
d: 8b 40 18 mov 0x18(%eax),%eax
Code; c01f0af0 <usb_unlink_urb+18/270>
10: 52 push %edx
Code; c01f0af0 <usb_unlink_urb+18/270>
11: 8b 40 10 mov 0x10(%eax),%eax
1 warning and 1 error issued. Results may not be reliable.
]--------------------------[ColdSync Version]-----------------------[
coldsync version 2.2.2.
ColdSync homepage at http://www.ooblick.com/software/coldsync/
Compile-type options:
HAVE_STRCASECMP, HAVE_STRNCASECMP: strings are compared without regard to case, whenever possible.
Default global configuration file: /usr/local/etc/coldsync.conf
]--------------------------[USB dmesg]------------------------------[ usb-uhci.c: $Revision: 1.268 $ time 09:31:06 Oct 22 2001 usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2usb-uhci.c: USB UHCI at I/O 0x3000, IRQ 10usb-uhci.c: Detected 2 portsusb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub foundhub.c: 2 ports detectedusb-uhci.c: v1.268:USB Universal Host Controller Interface driver usb.c: registered new driver hidhid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[email protected]> hid-core.c: USB HID support driversusb.c: registered new driver serialusbserial.c: USB Serial Driver core v1.4usbserial.c: USB Serial support registered for Handspring Visor usbserial.c: USB Serial support registered for Palm M500 usbserial.c: USB Serial support registered for Palm M505 usbserial.c: USB Serial support registered for Sony Clie 3.5 usbserial.c: USB Serial support registered for Sony Clie 4.0 visor.c: USB HandSpring Visor, Palm m50x, Sony Clie driver v1.4
]--------------------------[/proc/pci]------------------------------[
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 16). IRQ 10.
Master Capable. Latency=128.
I/O at 0x3000 [0x301f].
Signature · 2 lines
Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net [email protected] | 6BONE: CA2-6BONE | icq 18461740
Quoted 5 lines · Cliff Albert
Hi,
Coldsync segfaults after a successful hotsync with my Palm M500 which is connected using the USB Cradle. It also generates a oops. I hope the following info is enough to fix this problem.
This isn't a coldsync bug :)
A number of other people have reported this problem, and it is on my TODO list to fix.
Thanks for the oops trace.
greg k-h
Quoted 7 lines · Greg KH
Quoted 5 lines
Hi,
Coldsync segfaults after a successful hotsync with my Palm M500 which is connected using the USB Cradle. It also generates a oops. I hope the following info is enough to fix this problem.
This isn't a coldsync bug :)
Just wanted the coldsync people to know about the bug :)
Quoted 4 lines
A number of other people have reported this problem, and it is on my TODO list to fix.
Thanks for the oops trace.
No problem, i'm glad to test any patches and provide you with feedback.
Signature · 2 lines
Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net [email protected] | 6BONE: CA2-6BONE | icq 18461740
Quoted 7 lines · Greg KH
Quoted 5 lines · Cliff Albert
Hi,
Coldsync segfaults after a successful hotsync with my Palm M500 which is connected using the USB Cradle. It also generates a oops. I hope the following info is enough to fix this problem.
Quoted 6 lines
This isn't a coldsync bug :)
A number of other people have reported this problem, and it is on my TODO list to fix.
Thanks for the oops trace.
I have three more if you're interested. Kernel 2.4.12 (from Debian unstable), coldsync 2.2.0, USB Palm m500. Disclaimer: NVdriver.o is loaded...
Marius Gedminas
Signature · 2 lines
If you are angry with someone, you should walk a mile in their shoes... then you'll be a mile away from them, and you'll have their shoes.