Skip to contentSkip to conversation

2.4.12-ac, lm-sensors broken ??

DISCUSSION f5ibh 2 participants 2 messages Oct 24, 2001

lore
Share & tools
lore

f5ibh

author
#0 lore raw

Hi,

I use the lm-sensors on my system, it works fine with 2.2.20pre and 2.4.13 but not with the ac tree, is there any reason for that ? I compile the i2c and lm-sensors package as modules outside the kernel. The .config are the same for both the kernels. The various modules (w83781d i2c-proc i2c-isa i2c-core) loads fine with both systems.

with 2.4.12-ac5
---------------
[jean-luc@debian-f5ibh] ~ # uname -a
Linux debian-f5ibh 2.4.12-ac5 #1 lun oct 22 12:18:52 CEST 2001 i586 unknown

[jean-luc@debian-f5ibh] ~ # sensors
No sensors found!

system data :

If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux debian-f5ibh 2.4.12-ac5 #1 lun oct 22 12:18:52 CEST 2001 i586 unknown

Gnu C                  2.95.4
Gnu make               3.79.1
binutils               2.11.90.0.27
util-linux             2.11l
modutils               2.4.10
e2fsprogs              tune2fs
reiserfsprogs          3.x.0j
PPP                    2.4.1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         usb-ohci usbcore nfsd lockd sunrpc serial parport_pc lp parport autofs4 es1371 soundcore ac97_codec gameport w83781d i2c-proc i2c-isa i2c-core rtc unix

with 2.4.13
-----------
[jean-luc@debian-f5ibh] ~ # uname -a
Linux debian-f5ibh 2.4.13 #1 mer oct 24 13:22:17 CEST 2001 i586 unknown

[jean-luc@debian-f5ibh] ~ # sensors
w83781d-isa-0290

Adapter: ISA adapter
Algorithm: ISA algorithm
Vcore 1:   +2.24 V  (min =  +2.09 V, max =  +2.30 V)              
Vcore 2:   +2.24 V  (min =  +2.09 V, max =  +2.30 V)              
+3.5V:     +3.52 V  (min =  +3.32 V, max =  +3.66 V)              
+5V:       +4.86 V  (min =  +4.72 V, max =  +5.24 V)              
+12V:     +12.08 V  (min = +11.36 V, max = +12.58 V)              
-12V:     -11.82 V  (min = -11.33 V, max = -12.55 V)              
-5V:       -5.19 V  (min =  -4.74 V, max =  -5.24 V)              
CPU fan:  5400 RPM  (min = 3000 RPM, div = 2)                     
MB:       +39.0�C   (limit = +55�C, hysteresis = +55�C)        
Processor:+46.8�C   (limit = +65�C, hysteresis = +65�C)        
vid:      +3.50 V
alarms:   Chassis intrusion detection                             

beep_enable:
Sound alarm disabled

system data :

If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux debian-f5ibh 2.4.13 #1 mer oct 24 13:22:17 CEST 2001 i586 unknown

Gnu C                  2.95.4
Gnu make               3.79.1
binutils               2.11.90.0.27
util-linux             2.11l
modutils               2.4.10
e2fsprogs              tune2fs
reiserfsprogs          3.x.0j
PPP                    2.4.1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         usb-ohci usbcore nfsd lockd sunrpc serial parport_pc lp parport autofs4 es1371 soundcore ac97_codec gameport w83781d i2c-proc i2c-isa i2c-core rtc unix

---
Regards
Jean-Luc

#1 lore raw
Quoted 7 lines · On Wednesday 24 October 2001 08:38, f5ibh wrote:

Hi,

I use the lm-sensors on my system, it works fine with 2.2.20pre and 2.4.13 but not with the ac tree, is there any reason for that ? I compile the i2c and lm-sensors package as modules outside the kernel. The .config are the same for both the kernels. The various modules (w83781d i2c-proc i2c-isa i2c-core) loads fine with both systems.

I use it quite nicely on 2.4.12-ac3 the latest i2c stack is already in the
ac branch, you need not compile it on your own. lm sensors version 2.6.1 and up is supported. Just compile and install it. (make;make install).