Skip to contentSkip to conversation

r128 + agpgart + APM suspend = death

DISCUSSION Erik Andersen 2 participants 4 messages Oct 29, 2001 – Oct 30, 2001

lore
Share & tools
lore
#0 lore raw

I have a Dell Latitude C800 laptop. It works just great and I can use agpgart + r128 + XFree86 4.0.1 to get nice full screen 3D. tuxracer looks nice.

But if I suspend my laptop when the agpgart module is loaded is seems to suspend just fine, but will not resume.... Just
a black screen (of death). If I ensure that the agpgart and
r128 modules are not loaded (by commenting out the 'Load "dri"' line in /etc/X11/XF86Config-4, then killing X and unloading the modules) then I can suspend.

Anyone else seeing similar problems with APM + agpgart? The problem has has been the same with all the 2.4.x kernels I've tried it on, though I am running 2.4.12-ac6 at the moment.

-Erik

--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--

#1 lore raw

Same for me with an Inspiron 8000. I haven't had much time to look carefully at it, though.

-Luis

Quoted 25 lines · Erik Andersen

I have a Dell Latitude C800 laptop. It works just great and I can use agpgart + r128 + XFree86 4.0.1 to get nice full screen 3D. tuxracer looks nice.

But if I suspend my laptop when the agpgart module is loaded is seems to suspend just fine, but will not resume.... Just
a black screen (of death). If I ensure that the agpgart and
r128 modules are not loaded (by commenting out the 'Load "dri"' line in /etc/X11/XF86Config-4, then killing X and unloading the modules) then I can suspend.

Anyone else seeing similar problems with APM + agpgart? The problem has has been the same with all the 2.4.x kernels I've tried it on, though I am running 2.4.12-ac6 at the moment.

-Erik

--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons-- -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to Erik Andersen
Quoted 6 lines · Erik Andersen

I have a Dell Latitude C800 laptop. It works just great and I can use agpgart + r128 + XFree86 4.0.1 to get nice full screen 3D. tuxracer looks nice.

But if I suspend my laptop when the agpgart module is loaded is seems to suspend just fine, but will not resume.... Just

[----------snip---------------]

Quoted 4 lines

Anyone else seeing similar problems with APM + agpgart? The problem has has been the same with all the 2.4.x kernels I've tried it on, though I am running 2.4.12-ac6 at the moment.

One more bit of data. XFree86 reports that my system has a:

    (--) PCI:*(1:0:0) ATI Rage 128 Mobility MF rev 0, Mem @ 0xe8000000/26, 0xfcffc000/14, I/O @ 0xcc00/8

A few friends of mine have similar Dell laptops with the same set of kernel modules loaded -- and theirs do not choke on APM suspend. But their systems report a slightly different r128 model:

    (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf8000000/26, 0xf4100000/14, I/O @ 0x2000/8

-Erik

--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--

#3 lore raw
In reply to Erik Andersen

Hi Erik,

my machine prints the same message, but your mail prompted me to update my bios (from A10 to A17), and now I can suspend and resume w/ agpgart loaded. Using 2.4.12-ac5 and XFree 4.1.0

HTH,
-Luis

Quoted 31 lines · Erik Andersen
Quoted 6 lines · Erik Andersen

I have a Dell Latitude C800 laptop. It works just great and I can use agpgart + r128 + XFree86 4.0.1 to get nice full screen 3D. tuxracer looks nice.

But if I suspend my laptop when the agpgart module is loaded is seems to suspend just fine, but will not resume.... Just

[----------snip---------------]

Quoted 4 lines

Anyone else seeing similar problems with APM + agpgart? The problem has has been the same with all the 2.4.x kernels I've tried it on, though I am running 2.4.12-ac6 at the moment.

One more bit of data. XFree86 reports that my system has a:

    (--) PCI:*(1:0:0) ATI Rage 128 Mobility MF rev 0, Mem @ 0xe8000000/26, 0xfcffc000/14, I/O @ 0xcc00/8

A few friends of mine have similar Dell laptops with the same set of kernel modules loaded -- and theirs do not choke on APM suspend. But their systems report a slightly different r128 model:

    (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf8000000/26, 0xf4100000/14, I/O @ 0x2000/8

-Erik

--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons-- -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/