Skip to contentSkip to conversation

hang with 2.4.14 & vmware 3.0.x, anyone else seen this?

DISCUSSION Petr Vandrovec 4 participants 4 messages Nov 8, 2001 – Nov 9, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines · On 8 Nov 01 at 22:24, Frank de Lange <frank@unterne wrote:
Quoted 2 lines

Only the big white switch helps (fsck'ing 80 gigs gives me enough time to make a good cup of coffee... time for ext3 in the main kernel series...)

I tried Win2k and Netware6 (both 128MB) virtual machines running on the top of 2.4.15-pre1. My machine has 256MB RAM, SMP PIII/800. Maybe that it even worked faster than under Alan's kernel, specially when I tried to crash it by creating Netware6 256MB virtual machine - it stresses 256MB system a bit - but to my surprise system still stayed very responsive, without any crash, of course. Only usual complaints when running Netware6 as guest: 'rtc: lost some interrupts at 512Hz.'.

So I was not able to reproduce it. As I said, my system has 256MB of memory, two PIII/800, 40GB IDE, some tulip based network card, and on background it grabs some TV pictures using two bt878 pieces - so pretty standard box, running unstable Debian with 4.1 XFree on mga g450.

There was no other activity during the testing AFAIK.

If you see something different from your box, or from your VMs, tell me. But adding some SCSI adapter is beyond PCI slots of my box. I also assume that you are using released VMware version, build 1455.
Best regards,
Petr Vandrovec [email protected]

#1 lore raw
Quoted 3 lines · Petr Vandrovec

If you see something different from your box, or from your VMs, tell me. But adding some SCSI adapter is beyond PCI slots of my box. I also assume that you are using released VMware version, build 1455.

Yeah, using VMware build 1455 on ABit BP-6 with 2 * Celeron 466@466, 768 MB RAM (dirt cheap nowadays so why not...), 2 * Maxtor 40GB IDE on BX controller, HPT controller not in use, Matrox G400. I've seen the rtc: blah errors, stressed the box to its limits with VM's with Linux/WinXP, and every now and then...

it just freezes... (only when using a Linus kernel, and only when using VMware)

I'll try 2.4.15pre, maybe it helps...

Cheers//Frank

Signature · 9 lines
  WWWWW      _______________________
 ## o o\    /     Frank de Lange     \
 }#   \|   /                          \
  ##---# _/     <Hacker for Hire>      \
   ####   \      +31-320-252965        /
           \    [email protected]    /
            -------------------------
 [ "Omnis enim res, quae dando non deficit, dum habetur
    et non datur, nondum habetur, quomodo habenda est."  ]
#2 lore raw

As a matter of fact, yes. In fact, I think this was actually to problem I encountered a few days ago that I reported (I thought it was a loopback problem). I'm running on a DELL Optiplex GX1 though.

-- todd --

--text follows this line--

Quoted 42 lines

X-Apparently-To: [email protected] via web13603.mail.yahoo.com; 08 Nov 2001 14:44:59 -0800 (PST)
X-RocketRCL: -1;0;0
X-Track: 1: 40
X-Authentication-Warning: www.unternet.org: frank set sender to [email protected] using -f
Date: Thu, 8 Nov 2001 23:39:54 +0100
From: Frank de Lange <[email protected]>
Cc: [email protected]
Content-Disposition: inline
Sender: [email protected]
X-Mailing-List: [email protected]

Quoted 3 lines · Petr Vandrovec

If you see something different from your box, or from your VMs, tell me. But adding some SCSI adapter is beyond PCI slots of my box. I also assume that you are using released VMware version, build 1455.

Yeah, using VMware build 1455 on ABit BP-6 with 2 * Celeron 466@466, 768 MB RAM (dirt cheap nowadays so why not...), 2 * Maxtor 40GB IDE on BX controller, HPT controller not in use, Matrox G400. I've seen the rtc: blah errors, stressed the box to its limits with VM's with Linux/WinXP, and every now and then...

it just freezes... (only when using a Linus kernel, and only when using VMware)

I'll try 2.4.15pre, maybe it helps...

Cheers//Frank
--
WWWWW _______________________
## o o\ / Frank de Lange \

  }#   \|   /                          \
   ##---# _/     <Hacker for Hire>      \
    ####   \      +31-320-252965        /
            \    [email protected]    /
             -------------------------

[ "Omnis enim res, quae dando non deficit, dum habetur
et non datur, nondum habetur, quomodo habenda est." ]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Petr Vandrovec
Quoted 6 lines · Frank de Lange
Quoted 3 lines · Petr Vandrovec

If you see something different from your box, or from your VMs, tell me. But adding some SCSI adapter is beyond PCI slots of my box. I also assume that you are using released VMware version, build 1455.

Quoted 8 lines

Yeah, using VMware build 1455 on ABit BP-6 with 2 * Celeron 466@466, 768 MB RAM (dirt cheap nowadays so why not...), 2 * Maxtor 40GB IDE on BX controller, HPT controller not in use, Matrox G400. I've seen the rtc: blah errors, stressed the box to its limits with VM's with Linux/WinXP, and every now and then...

it just freezes... (only when using a Linus kernel, and only when using VMware)

I'll try 2.4.15pre, maybe it helps...

2.4.14 + VMWare 1455 froze on my laptop the other day, hard hang, no
keyboard, had to keep poweroff pressed for several seconds to shut the box down. Ext3 though minimized quite nicely startup time :)

I can't now try to go much further - I zapped the original NT install
I didn't perform properly but my PageUp/PageDown keys aren't working anymore (hardware bug, sigh) and I can't scroll past the NT EULA as it wants PageDown :( Next week I'm getting the keyboard fixed, so I will resume testing.

The full installation though in the various attempts I performed went
through twice whilst I had only 1 freeze.

This is a Dell Latitude CPx750J, 256MB RAM, 20GB IBM disk, Xircom
RBEM56G100TX network card.

--alessandro

"we live as we dream alone / to break the spell we mix with the others
we were not born in isolation / but sometimes it seems that way"
(R.E.M., live intro to 'World Leader Pretend')