Skip to contentSkip to conversation

Oops/Aiee in 2.4.14 when unloading PCMCIA modules

DISCUSSION Thomas Braun 2 participants 2 messages Nov 9, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I get an oops every time when I stop PCMCIA with
cardctl eject; killproc /sbin/cardmgr; lsmod
With a "sleep 2" before lsmod it does not happen. I tried kernel 2.4.1[34] with modutils 2.4.{2,10}, pcmcia-cs-3.1.29.

The lsmod before unloading:
Module Size Used by

serial_cb               1268   1
tulip_cb               32608   2
cb_enabler              2720   4  [serial_cb tulip_cb]
ds                      6944   2  [cb_enabler]
i82365                 23312   2
pcmcia_core            43104   0  [cb_enabler ds i82365]
apm                     8768   1
ide-disk                6624   6
ide-probe-mod           7696   0
ide-mod                60460   6  [ide-disk ide-probe-mod]

The lspci for the PCMCIA card:
06:00.0 Non-VGA unclassified device: Xircom Cardbus Ethernet 10/100
Flags: fast devsel, IRQ 9
[virtual] I/O ports at 0200 [disabled]
[virtual] Memory at 60013000 (32-bit, non-prefetchable) [disabled] [virtual] Memory at 60012000 (32-bit, non-prefetchable) [disabled] Expansion ROM at 6000c000 [disabled]

06:00.1 Non-VGA unclassified device: Xircom Cardbus Ethernet + 56k Modem

        Flags: fast devsel, IRQ 9
        [virtual] I/O ports at 0280 [disabled]
        [virtual] Memory at 60011000 (32-bit, non-prefetchable) [disabled]
        [virtual] Memory at 60010000 (32-bit, non-prefetchable) [disabled]
        Expansion ROM at 60008000 [disabled]

Below the ksymoops. (Is the compare_maps warning due to loading the ide modules in initrd?) It is tainted from the PCMCIA modules.

I can make more tests if needed or provide more data. Thanks for any help.

Regards,
Thomas

ksymoops 2.4.0 on i686 2.4.14a. Options used
-V (default)
-k /proc/ksyms (specified)
-l /proc/modules (default)
-o /lib/modules/2.4.14a/ (default)
-m /boot/System.map-2.4.14a (default)

Warning (compare_maps): mismatch on symbol ide_devfs_handle , ide-mod says c8824be0, /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o says c88240b0. Ignoring /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o entry Warning (compare_maps): mismatch on symbol ide_hwifs , ide-mod says c8822d40, /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o says c8822210. Ignoring /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o entry Warning (compare_maps): mismatch on symbol ide_probe , ide-mod says c8822d20, /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o says c88221f0. Ignoring /lib/modules/2.4.14a/kernel/drivers/ide/ide-mod.o entry

Oops: 0002
CPU:    0
EIP:    0010:[<c011933c>]    Tainted: P

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010002
eax: 00000ce0 ebx: 00001000 ecx: c778a510 edx: 00000610
esi: 00000002 edi: 00000000 ebp: c02165c0 esp: c6663f58
ds: 0018 es: 0018 ss: 0018
Process pcmcia (pid: 1003, stackpage=c6663000)

Stack: 00000000 c02165a0 00000000 c02165c0 c6663fc4 c01193cf c010ac96 c0116406
       c0116340 00000000 00000001 c02165c0 fffffffe c011616a c02165c0 00000000
       c0214900 00000000 c6663fbc 00000046 c010817d 00000000 080caa18 00000000
Call Trace: [<c01193cf>] [<c010ac96>] [<c0116406>] [<c0116340>] [<c011616a>]
   [<c010817d>] [<c0109f48>]
Code: 89 42 04 89 10 c7 41 04 00 00 00 00 c7 01 00 00 00 00 fb 53
Quoted 1 line
Quoted 1 line

EIP; c011933c <timer_bh+228/27c> <=====

Trace; c01193cf <do_timer+3f/70>
Trace; c010ac96 <timer_interrupt+62/110>
Trace; c0116406 <bh_action+1a/48>
Trace; c0116340 <tasklet_hi_action+40/60>
Trace; c011616a <do_softirq+5a/ac>
Trace; c010817d <do_IRQ+a1/b4>
Trace; c0109f48 <call_do_IRQ+5/d>
Code; c011933c <timer_bh+228/27c>
00000000 <_EIP>:
Code; c011933c <timer_bh+228/27c> <=====
0: 89 42 04 mov %eax,0x4(%edx) <=====
Code; c011933f <timer_bh+22b/27c>
3: 89 10 mov %edx,(%eax)
Code; c0119341 <timer_bh+22d/27c>
5: c7 41 04 00 00 00 00 movl $0x0,0x4(%ecx)
Code; c0119348 <timer_bh+234/27c>
c: c7 01 00 00 00 00 movl $0x0,(%ecx)
Code; c011934e <timer_bh+23a/27c>
12: fb sti
Code; c011934f <timer_bh+23b/27c>
13: 53 push %ebx

<0>Kernel panic: Aiee, killing interrupt handler!

3 warnings issued. Results may not be reliable.

#1 lore raw

On Fri, 9 Nov 2001, Thomas Braun wrote:

[nospam] Hi,
[nospam]
[nospam] I get an oops every time when I stop PCMCIA with
[nospam] cardctl eject; killproc /sbin/cardmgr; lsmod
[nospam] With a "sleep 2" before lsmod it does not happen. I tried kernel [nospam] 2.4.1[34] with modutils 2.4.{2,10}, pcmcia-cs-3.1.29.

Thomas, I can verify a similar problem. I'm running 2.4.15-pre1 with pcmcia-3.1.29, not built into the kernel. The only difference with my setup is that it only seems to happen if I eject both cards at the same time or do other pcmcia card acrobatics. If I do one at a time, there doesn't appear to be a problem.

-[ [email protected] devel.pheared.net ]-
-[ Rather be forgotten, than remembered for giving in. ]-
-[ ZZ = g ^ (xb * xa) mod p g = h^{(p-1)/q} mod p ]-