Symbols missing help
The following configuration symbols are missing help entries. If you can supply a help entry for one or more of these, please send it to me for incorporation in the master Configure.help file.
Yes, some of these are choice symbols that don't strictly need entries in CML1. Please send entries in anyway; in CML2, choice symbols will have their own help entries.
ALPHA_EV67ARCH_ANAKINARCH_CAMELOTARCH_CDB89712ARCH_CLEP7312ARCH_CLPS711XARCH_CLPS7500ARCH_CO285ARCH_EDB7211ARCH_FOOTBRIDGEARCH_INTEGRATORARCH_SA1100ARCH_SHARKARC_CONSOLEATM_IDT77252ATM_IDT77252_RCV_ALLATM_LANAIAU1000_SERIAL_CONSOLEAU1000_UARTBLK_DEV_IT8172BLK_DEV_Q40IDECF_AREA6CF_BASE_ADDRCPU_ARM1020_D_CACHE_ONCPU_ARM1020_FORCE_WRITE_THROUGHCPU_ARM1020_I_CACHE_ONCPU_ARM1020_ROUND_ROBINCPU_ARM920_CPU_IDLECPU_ARM920_D_CACHE_ONCPU_ARM920_I_CACHE_ONCPU_ARM920_WRITETHROUGHCPU_ARM926TCPU_ARM926_CPU_IDLECPU_ARM926_D_CACHE_ONCPU_ARM926_I_CACHE_ONCPU_ARM926_ROUND_ROBINCPU_ARM926_WRITETHROUGHCPU_FREQDASD_AUTO_DIAGDASD_AUTO_ECKDDASD_AUTO_FBAEFI_VARSEP7211_IREP72XX_ROM_BOOTETRAX_ETHERNET_LPSLAVEETRAX_ETHERNET_LPSLAVE_HAS_LEDSETRAX_NETWORK_LED_ON_WHEN_ACTIVITYETRAX_NETWORK_LED_ON_WHEN_LINKETRAX_POWERBUTTON_BITETRAX_ROOT_DEVICEETRAX_SERIAL_PORT0ETRAX_SHUTDOWN_BITETRAX_SOFT_SHUTDOWNEUROTECH_WDTEVB_PCI1FB_TX3912FORWARD_KEYBOARDGEN_RTCGSC_DINOHWC_CPII2C_ALGO8XXI2C_PPC405_ADAPI2C_PPC405_ALGOI2C_RPXLITE
I82092IA64_GRANULE_16MBIA64_GRANULE_64MBIA64_SGI_SN_DEBUGIA64_SGI_SN_SIMIP6_NF_MATCH_MULTIPORTIP6_NF_MATCH_OWNERIP6_NF_TARGET_LOGIT8172_REVCIT8172_SCR0IT8172_SCR1IT8172_TUNINGITE_I2C_ADAPITE_I2C_ALGOJFFS_PROC_FSLASI_82596
LP486EMAPLE_KEYBOARDMAPLE_MOUSEMEMORY_SETMEMORY_SIZEMIPS_AU1000_ENETMTD_ABSENTMTD_ARM_INTEGRATORMTD_BLKMTDMTD_CDB89712MTD_JEDECPROBEMTD_L440GXMTD_LARTMTD_OBSOLETE_CHIPSMTD_SOLUTIONENGINEMTD_TQM8XXL
PCIBAPCI_PERMEDIAPCMCIA_AXNETPCMCIA_XIRCOM
PFAULTPHONE_IXJ_PCMCIA
PPPOATM
PROFILEPROFILE_SHIFTSA1100_ADSBITSYSA1100_CERF_16MBSA1100_CERF_32MBSA1100_CERF_64MBSA1100_CERF_8MBSA1100_CERF_CPLDSA1100_CERF_FLASH_16MBSA1100_CERF_FLASH_32MBSA1100_CERF_FLASH_8MBSA1100_EXTENEX1SA1100_EXTENEX1_16MBSA1100_FIRSA1100_FLEXANETSA1100_FREEBIRDSA1100_GRAPHICSMASTERSA1100_HUW_WEBPANELSA1100_ITSYSA1100_JORNADA720SA1100_OMNIMETERSA1100_PFS168SA1100_PLEBSA1100_SHERMANSA1100_SIMPADSA1100_YOPYSCSI_DECSIISCSI_LASISCSI_QLOGIC_FC_FIRMWARESCSI_SIMSERIAL_21285_OLDSERIAL_SGI_L1_PROTOCOLSERIAL_TX3912SERIAL_TX3912_CONSOLESGIWD93_SCSISHARED_KERNELSH_ADXSH_PCIDMA_NONCOHERENT
SIMETHSIM_SERIALSOUND_CMPCI_FMSOUND_CMPCI_FMIOSOUND_CMPCI_LINE_BASSSOUND_CMPCI_LINE_REARSOUND_CMPCI_MIDISOUND_CMPCI_MPUIOSOUND_CMPCI_SPDIFINVERSESOUND_VRC5477ST40_LMI_MEMORYSYSCLK_100SYSCLK_75SYSCLK_83
TN3215TN3215_CONSOLE
TN3270TN3270_CONSOLETULIP_MMIOUCODE_PATCHUSB_SERIAL_IRUSB_STORAGE_DATAFABUSB_STORAGE_HP8200eUSB_STORAGE_JUMPSHOT
USERIAL
VETHVIDEO_ZORAN_BUZVIDEO_ZORAN_DC10VIDEO_ZORAN_LML33VLAN_8021Q
Signature · 9 lines
<a href="http://www.tuxedo.org/~esr/">Eric S. Raymond</a> Question with boldness even the existence of a God; because, if there be one, he must more approve the homage of reason, than that of blindfolded fear.... Do not be frightened from this inquiry from any fear of its consequences. If it ends in the belief that there is no God, you will find incitements to virtue in the comfort and pleasantness you feel in its exercise... -- Thomas Jefferson, in a 1787 letter to his nephew
Quoted 3 lines · Eric S. Raymond
The following configuration symbols are missing help entries. If you can supply a help entry for one or more of these, please send it to me for incorporation in the master Configure.help file.
These are a mixture of IA64, SGI and SGI/IA64 configs. I will do them tomorrow.
Quoted 10 lines
EFI_VARSIA64_GRANULE_16MBIA64_GRANULE_64MBIA64_SGI_SN_DEBUGIA64_SGI_SN_SIM
PCIBASCSI_SIMSERIAL_SGI_L1_PROTOCOL
SIMETHSIM_SERIAL
Quoted 1 line · Eric S. Raymond
USB_SERIAL_IR
Here's the patch against 2.4.15-pre4 for this symbol.
thanks,
greg k-h
Documentation/Configure.help +11 -0
@@ -12717,6 +12717,17 @@ The module will be called visor.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. +USB IR Dongle Serial Driver +CONFIG_USB_SERIAL_IR + Say Y here if you want to enable simple serial support for USB IrDA + devices. This is useful if you do not want to use the full IrDA + stack. + + This code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called ir-usb.o. If you want to compile it as a + module, say M here and read <file:Documentation/modules.txt>. + USB Belkin and Paracom Single Port Serial Driver CONFIG_USB_SERIAL_BELKIN Say Y here if you want to use a Belkin USB Serial single port
Quoted 3 lines · [email protected] said:
The following configuration symbols are missing help entries. If you can supply a help entry for one or more of these, please send it to me for incorporation in the master Configure.help file.
CONFIG_MTD_ARM_INTEGRATOR left for rmk.
i82092 compatible bridge supportCONFIG_I82092
This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, found in some older laptops and more commonly in evaluation boards for the chip.
CONFIG_JFFS_PROC_FS
Enabling this option will cause statistics from mounted JFFS file systems to be made available to the user in the /proc/fs/jffs/ directory.
Support for absent chips in bus mapping CONFIG_MTD_ABSENT
This option enables support for a dummy probing driver used to allocated placeholder MTD devices on systems that have socketed or removable media. Use of this driver as a fallback chip probe preserves the expected registration order of MTD device nodes on the system regardless of media presence. Device nodes created with this driver will return -ENODEV upon access.
MTD Emulation using block deviceCONFIG_MTD_BLKMTD
This driver allows a block device to appear as an MTD. It would generally be used in the following cases:
Using Compact Flash as an MTD, these usually present themselves to the system as an ATA drive.
Testing MTD users (eg JFFS2) on large media and media that might be removed during a write (using the floppy drive).
Cirrus CDB89712 evaluation board mappings CONFIG_MTD_CDB89712
This enables access to the flash or ROM chips on the CDB89712 board. If you have such a board, say 'Y'.
Detect non-CFI AMD/JEDEC-compatible flash chips CONFIG_MTD_JEDECPROBE
This option enables JEDEC-style probing of flash chips which are not compatible with the Common Flash Interface, but will use the common CFI-targetted flash drivers for any chips which are identified which are in fact compatible in all but the probe method. This actually covers most AMD/Fujitsu-compatible chips, and will shortly cover also non-CFI Intel chips (that code is in MTD CVS and should shortly be sent for inclusion in Linus' tree)
BIOS flash chip on Intel L440GX boardsCONFIG_MTD_L440GX
Support for treating the BIOS flash chip on Intel L440GX motherboards as an MTD device - with this you can reprogram your BIOS.
BE VERY CAREFUL.
28F160xx flash driver for LARTCONFIG_MTD_LART
This enables the flash driver for LART. Please note that you do not need any mapping/chip driver for LART. This one does it all for you, so go disable all of those if you enabled some of them (:
Older (theoretically obsoleted now) drivers for non-CFI chips CONFIG_MTD_OBSOLETE_CHIPS
This option does not enable any code directly, but will allow you to select some other chip drivers which are now considered obsolete, because the generic CONFIG_JEDEC_PROBE code above should now detect the chips which are supported by these drivers, and allow the generic CFI-compatible drivers to drive the chips. Say 'N' here unless you have already tried the CONFIG_JEDEC_PROBE method and reported its failure to the MTD mailing list at <[email protected]>
CFI Flash device mapped on Hitachi SolutionEngine CONFIG_MTD_SOLUTIONENGINE
This enables access to the flash chips on the Hitachi SolutionEngine and similar boards. Say 'Y' if you are building a kernel for such a board.
Flash chip mapping on TQM8xxL PPC board CONFIG_MTD_TQM8XXL
The TQM8xxL PowerPC board has up to two banks of CFI-compliant chips, currently uses AMD one. This 'mapping' driver supports that arrangement, allowing the CFI probe and command set driver code to communicate with the chips on the TQM8xxL board. More at
(http://www.denx.de/embedded-ppc-en.html).
DarknessCONFIG_MEMORY_SET
This is an option about which you will never be asked a question. Therefore, I conclude that you do not exist - go away.
Are you still here? Piss off, I tell you.
There is a grue here.
Physical memory sizeCONFIG_MEMORY_SIZE
This sets the default memory size assumed by your SH kernel. It can be overridden as normal by the 'mem=' argument on the kernel command line. If unsure, consult your board specifications or just leave it as 0x00400000 which was the default value before this became configurable.
CONFIG_SH_PCIDMA_NONCOHERENT
Enable this option if your platform does not have a CPU cache which remains coherent with PCI DMA. It is safest to say 'Y', although you will see better performance if you can say 'N', because the PCI DMA code will not have to flush the CPU's caches. If you have a PCI host bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'.
--
dwmw2
Quoted 7 lines
Darkness
CONFIG_MEMORY_SET
This is an option about which you will never be asked a question. Therefore, I conclude that you do not exist - go away.Are you still here? Piss off, I tell you.
Umm.. the policy has been rude words in source code = ok, rude word in errors that might one day appear to a user = not ok
Quoted 2 lines · [email protected] said:
Umm.. the policy has been rude words in source code = ok, rude word
in errors that might one day appear to a user = not ok
That message should _never_ appear to a user. Anyone who wants to gratuitously change that can write a suitable help text.
Actually I'm hoping that CML2, if adopted, will allow us to get rid of the CONFIG_MEMORY_SET cruft in arch/sh/config.in altogether.
But not, of course, until after the initial adoption of the CML2 codebase - actual changes to the behaviour of the config options _must_ be done separately to the change in mechanism.
--
dwmw2