kswapd and system response
hi there,
every so often, my system (2.4.13 smp) gets really sloooooow. a typical top
looks something like:
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND
5 root 14 0 0 0 0 RW 99.9 0.0 7:52 kswapd
7 root 9 0 0 0 0 SW 1.9 0.0 0:04 kupdated
2053 root 13 0 984 984 776 R 0.7 0.4 0:01 top
2063 p 9 0 2080 2080 1292 S 0.3 0.9 0:00 vimkswapd is definitely not behaving correctly.
the thing that brought it on this time was gtv (an mpeg viewer which uses
sdl) bailed on me. X "kind of" froze, so i killed it. but that's only the
cause this time around. last time, it happened between the time of going to bed and waking up (ie- the system was pretty much idling from a user's pov).
this has been happening with the 2.4.13 kernel every couple of days.
i thought i'd post it to lkml to let someone know that there's a problem. i'm not subscribed to the list, so if there's anything else i can do to help diagnose what's going on next time it happens, please cc me.
i feel like such a loser when i reboot. ;) i heard that 2.4.15 was just
released, so i'll try upgrading to that and see if it helps any.
pete
Signature · 2 lines
PGP Fingerprint: B9F1 6CF3 47C4 7CD8 D33E 70A9 A3B9 1945 67EA 951D PGP Public Key: finger [email protected]
Quoted 18 lines · Peter Jay Salzman
hi there,
every so often, my system (2.4.13 smp) gets really sloooooow. a typical top
looks something like:PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 5 root 14 0 0 0 0 RW 99.9 0.0 7:52 kswapd 7 root 9 0 0 0 0 SW 1.9 0.0 0:04 kupdated 2053 root 13 0 984 984 776 R 0.7 0.4 0:01 top 2063 p 9 0 2080 2080 1292 S 0.3 0.9 0:00 vimkswapd is definitely not behaving correctly.
the thing that brought it on this time was gtv (an mpeg viewer which uses
sdl) bailed on me. X "kind of" froze, so i killed it. but that's only the
cause this time around. last time, it happened between the time of going to bed and waking up (ie- the system was pretty much idling from a user's pov).
Quoted 8 lines
this has been happening with the 2.4.13 kernel every couple of days.
i thought i'd post it to lkml to let someone know that there's a problem. i'm not subscribed to the list, so if there's anything else i can do to help diagnose what's going on next time it happens, please cc me.
i feel like such a loser when i reboot. ;) i heard that 2.4.15 was just
released, so i'll try upgrading to that and see if it helps any.
Don't use 2.4.15: it may corrupt your filesystem.
I just released 2.4.16-pre1 which has a fix for this problem...
Please try it and tell us if you still see the kswapd problems.
Quoted 11 lines · Peter Jay Salzman
hi there,
every so often, my system (2.4.13 smp) gets really sloooooow. a typical top
looks something like:PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 5 root 14 0 0 0 0 RW 99.9 0.0 7:52 kswapd 7 root 9 0 0 0 0 SW 1.9 0.0 0:04 kupdated 2053 root 13 0 984 984 776 R 0.7 0.4 0:01 top 2063 p 9 0 2080 2080 1292 S 0.3 0.9 0:00 vim
Quoted 9 lines
kswapd is definitely not behaving correctly.
the thing that brought it on this time was gtv (an mpeg viewer which uses
sdl) bailed on me. X "kind of" froze, so i killed it. but that's only the
cause this time around. last time, it happened between the time of going to bed and waking up (ie- the system was pretty much idling from a user's pov).this has been happening with the 2.4.13 kernel every couple of days.
Hello
I have experienced similar behaviour with kswapd/kupdated with 2.4.12 and 2.4.13 . After much struggle, I discovered that the system had become slugish and non-responsive because i was using the wrong IDE busmastering and DMA drivers (VIA chipset) instead of the correct ones for my motherboard (PROMISE chipset). If you are using IDE, then perhaps you have something similar and are using the incorrect drivers?
If you are indeed using IDE then suggest that you turn of busmastering all together and give it another try.
Ahmed.
Quoted 4 lines · Ahmed Masud
Quoted 3 lines · Peter Jay Salzman
hi there,
every so often, my system (2.4.13 smp) gets really sloooooow. a typical
<snip>
Quoted 11 lines
Quoted 1 line
this has been happening with the 2.4.13 kernel every couple of days.
Hello
I have experienced similar behaviour with kswapd/kupdated with 2.4.12 and 2.4.13 . After much struggle, I discovered that the system had become slugish and non-responsive because i was using the wrong IDE busmastering and DMA drivers (VIA chipset) instead of the correct ones for my motherboard (PROMISE chipset). If you are using IDE, then perhaps you have something similar and are using the incorrect drivers?
Quoted 4 lines
If you are indeed using IDE then suggest that you turn of busmastering all together and give it another try.
Ahmed.
I am having the same problem with 2.4.6. I have the VIA Drivers compiled in, which are the correct ones for my chipset. Perhaps it is a problem with the VIA Drivers? I havn't tested it with anything else.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Quoted 6 lines
I am having the same problem with 2.4.6. I have the VIA Drivers compiled in, which are the correct ones for my chipset. Perhaps it is a problem with the VIA Drivers? I havn't tested it with anything else.
Could very well be... VIA chipset has been a bit of a snag for me in the past.
Ahmed.