Skip to contentSkip to conversation

Typo in drivers/char/Config.in?

DISCUSSION Kent Borg 2 participants 2 messages Nov 30, 2001

lore
Share & tools
lore
#1 lore raw

Printing out message to a console in MBX860??

I'm so sorry to post this unrelated message.
....
Hello,
I want to print out some message to console monitor for a debugging from the application loaded
at MBX860 through EPPC-Bug.This machine doesn't have any OS and my
application is a kernel.

The port status is the following.

EPPC-Bug>pf
Current Port Assignments: (LUN: Device-Name Port-Name)

00: FDC37C672-COM COM1 (Console)

01: MPC8XX-SMC SMC2

02: MEMORY CHNL0

According to MBX manual, SMC1 is used as console port.

If it's true, COM1 is using SMC1?

So, I thought I must use SMC'1 UART to print out to a console. Is it correct?

I tested the application using SMC1' s UART

by applying a SMC's UART application note provided by Motorola's
website(MPC860COD17).

But It doesn't seem to work. I can't see anything from a console after executing this test application.

The following is what I did to run this application using SMC1' UART.

-----------

EPPC-Bug>LO 0; X=cat smc1.s3

EPPC-Bug>GO

Effective address: 00080004

--------------
I attached the source code.

Thank you so much for any help.

Okehee