Skip to contentSkip to conversation

ARP shows client is given wrong MAC Address for system with 2 NICs

DISCUSSION Q A 5 participants 6 messages Dec 4, 2001 – Dec 6, 2001

lore
Share & tools
lore

Q A

author
#0 lore raw

Hello,

I am not on the linux-kernel mailing list so please reply all.

My problem:

Note that in the following description _(A) refers to the interface that was brought on line first in the
system after boot up. That is if eth0 came up first,
_(A) refers to eth0. If eth1 came up first, _(A)
refers to eth1. Read on and you will see the problem.

I have a system with 2 NICs in one box. When I telent to IP(A) and I am allowed to connect with no problems and are given MAC(A) which I check with the arp command. I then telnet to IP(B) and are given MAC(A).
Yes, MAC(A). I then ifdown NIC(B) device and telent
to IP(B) and connect with no problems.

Now looking at ARP I see I am connected to NIC(A) because I have the MAC(A) according to ARP. I then bring up NIC(B) and shutdown NIC(A) while still connected as it looks to NIC(A). I look at ARP and I see I still have the MAC(A). I press enter in the telnet window connected to what I ARP tells me is
NIC(A) and everything works. I check ARP and see
that the I now have MAC(B) for the connection.

I really need to fix this soon so that I can bring this box online.

The system:
uname -a...
Linux system-name 2.4.9-13SGI_XFS_PR1enterprise #1 SMP Fri Nov 2 23:44:39 CST 2001 i686 unknown

lsmod...
Module Size Used by

nfs                    94706   0  (autoclean)
lockd                  60515   0  (autoclean) [nfs]
sunrpc                 84519   0  (autoclean) [nfs
lockd]
autofs                 13596   6  (autoclean)
e1000                  47194   0  (autoclean)
eepro100               19799   1  (autoclean)
lvm-mod                64482  16 
usb-ohci               23358   0  (unused)
usbcore                66308   1  [usb-ohci]
raid1                  16069   4 
raid0                   4314   1 
cciss                  21124   4 
aic7xxx               119883   8 
sd_mod                 12859   8 
scsi_mod              110515   2  [aic7xxx sd_mod]

This is eth1: e1000
This is eth0: eepro100

Based on RH Linux 7.1 and as you can see SGI XFS.

I found two notes on this subject on the net.

Both are from this list.
One has the subject: RE: ARP out the wrong interface

Quoted 1 line

From Date: Feb, 09 2001

This one notes that 2.2.18 and 2.4 have a patch to allow you to:

# sysctl -w net.ipv4.conf.all.arpfilter=1

Yet I only found net.ipv4.conf.all.arp_filter setting this to 1(on) has no effect on the problem.

The second one has subject: RE: [2.2] Network Interface aliasing

Quoted 1 line

From Date: Nov, 9 1999

This on talks about IP in the 2.2 kernel. It talks about an "optimization to reduce work on hosts monitoring in promiscuous mode." "The decision is made on IP level and by IP address, MAC level details are inessential." So I gather what I am seeing is to optimise network trafic. But I think there is a bug.

I am not a kernel programmer. Please have a look and let me know what more info you need.

Thanks,

Q

__________________________________________________
Do You Yahoo!?
Buy the perfect holiday gifts at Yahoo! Shopping.
http://shopping.yahoo.com

#1 lore raw

[SNIPPED...]
There is an ARP cache, always has been, always will be. This is so an ARP (Address Resolution Protocol) probe doesn't have to occur for every data transmission. It is presumed that an IP address, including your own, won't jump around from device-to-device.

You are moving your IP address to another device (MAC address). What do you expect?

You can delete the old entries from your ARP cache, but it has to be done for every system that would be affected or you can just wait for the ARP cache entry to expire.

/sbin/arp -d ipaddress

Cheers,
Dick Johnson

Penguin : Linux version 2.4.1 on an i686 machine (799.53 BogoMips).

I was going to compile a list of innovations that could be attributed to Microsoft. Once I realized that Ctrl-Alt-Del was handled in the BIOS, I found that there aren't any.

#2 lore raw
Quoted 8 lines · Richard B. Johnson

You are moving your IP address to another device (MAC address). What do you expect?

You can delete the old entries from your ARP cache, but it has to be done for every system that would be affected or you can just wait for the ARP cache entry to expire.

/sbin/arp -d ipaddress

It is also possible to send out a gratuitous arp packet that will force everyone else on the subnet to update their arp caches. This is the normal technique for moving an IP address from one NIC to another.

Chris

Signature · 4 lines
Chris Friesen                    | MailStop: 043/33/F10  
Nortel Networks                  | work: (613) 765-0557
3500 Carling Avenue              | fax:  (613) 765-2986
Nepean, ON K2H 8E9 Canada        | email: [email protected]
author
#3 lore raw
In reply to Richard B. Johnson

Thanks, but I am not moving the IP from one to the other. I am just saying it doesn't matter _(A) does not have to be eth0. Try setting up a system with 2 NICs and follow my notes. I have checked another system with a normal 2.4.3 kernel.

Thanks for yours and everyone elses help.

Q

--- "Richard B. Johnson" <[email protected]>

Quoted 29 lines · wrote:

[SNIPPED...]
There is an ARP cache, always has been, always will be. This is so
an ARP (Address Resolution Protocol) probe doesn't have to occur for
every data transmission. It is presumed that an IP address, including
your own, won't jump around from device-to-device.

You are moving your IP address to another device
(MAC address). What
do you expect?

You can delete the old entries from your ARP cache, but it has to
be done for every system that would be affected or you can just wait
for the ARP cache entry to expire.

/sbin/arp -d ipaddress

Cheers,
Dick Johnson

Penguin : Linux version 2.4.1 on an i686 machine
(799.53 BogoMips).

Quoted 8 lines

I was going to compile a list of innovations
that could be
attributed to Microsoft. Once I realized that
Ctrl-Alt-Del
was handled in the BIOS, I found that there
aren't any.

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com

#4 lore raw

Have you tried turning on arp-filtering? It generally acts more sane in a 2+ NIC machine. Try:

echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter

Quoted 65 lines · Q A

Thanks, but I am not moving the IP from one to the other. I am just saying it doesn't matter _(A) does not have to be eth0. Try setting up a system with 2 NICs and follow my notes. I have checked another system with a normal 2.4.3 kernel.

Thanks for yours and everyone elses help.

Q

--- "Richard B. Johnson" <[email protected]>

Quoted 28 lines · wrote:

[SNIPPED...]
There is an ARP cache, always has been, always will be. This is so
an ARP (Address Resolution Protocol) probe doesn't have to occur for
every data transmission. It is presumed that an IP address, including
your own, won't jump around from device-to-device.

You are moving your IP address to another device
(MAC address). What
do you expect?

You can delete the old entries from your ARP cache, but it has to
be done for every system that would be affected or you can just wait
for the ARP cache entry to expire.

/sbin/arp -d ipaddress

Cheers,
Dick Johnson

Penguin : Linux version 2.4.1 on an i686 machine
(799.53 BogoMips).

Quoted 9 lines

I was going to compile a list of innovations
that could be
attributed to Microsoft. Once I realized that
Ctrl-Alt-Del
was handled in the BIOS, I found that there
aren't any.

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 3 lines
Ben Greear <[email protected]>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear
#5 lore raw
In reply to Richard B. Johnson
Quoted 5 lines · In article <[email protected]> you…

You can delete the old entries from your ARP cache, but it has to be done for every system that would be affected or you can just wait for the ARP cache entry to expire.

/sbin/arp -d ipaddress

You can also advertise your new ARP Address. This is typically known as gratious arp and is used within duplicate address detection. Most systems will update their cache. You can use arping on Linux to do that (and more).

Greetings
Bernd