Skip to contentSkip to conversation

CML2 1.9.7 is available

DISCUSSION Eric S. Raymond 3 participants 5 messages Dec 12, 2001 – Dec 13, 2001

lore
Share & tools
lore
#0 lore raw

Release 1.9.7: Wed Dec 12 02:34:34 EST 2001
* Rulebase and help sync with 2.4.17-pre8/2.5.1-pre10.
* Richard Todd corrected an obscure bug in unbinding of dependents.
* Various small enhancements and cleanups by Richard Todd.
* Relaxed string length limit in menuconfig.
* Bug in visiting of choice menus corrected.

Bug queue is empty.

Signature · 11 lines
		<a href="http://www.tuxedo.org/~esr/">Eric S. Raymond</a>

The conclusion is thus inescapable that the history, concept, and 
wording of the second amendment to the Constitution of the United 
States, as well as its interpretation by every major commentator and 
court in the first half-century after its ratification, indicates 
that what is protected is an individual right of a private citizen 
to own and carry firearms in a peaceful manner.
         -- Report of the Subcommittee On The Constitution of the Committee On 
            The Judiciary, United States Senate, 97th Congress, second session 
            (February, 1982), SuDoc# Y4.J 89/2: Ar 5/5
#1 lore raw
Quoted 1 line · Eric S. Raymond

Release 1.9.7: Wed Dec 12 02:34:34 EST 2001

Dangling symlink kernel-tree/scripts/tree.py breaks the CML2 install, rm kernel-tree/scripts/tree.py first.

There are still discrepancies between the output produced by different forms of make *config. I am also seeing spurious deduction messages which may be related or may be a separate problem.

# cd cml2-1.9.7/
# rm kernel-tree/scripts/tree.py
# ./install-cml2 /build/kaos/2.4.16-cml2/
Examining your build environment...
Good. You have Python 2.x installed as 'python2.1' already.
Python looks sane...
Good, your python has curses support linked in.
Good, your python has Tk support linked in.
Compiling file list...
Operating on /build/kaos/2.4.16-cml2...
Installing new files...
Merging in CML2 help texts from Configure.help...
Modifying configuration productions...
You are ready to go, cd to /build/kaos/2.4.16-cml2.
# cd /build/kaos/2.4.16-cml2/
# rm -f .config* config.out* rules.out
# yes '' | make oldconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
/build/kaos/2.4.16-cml2/include
python2 -O scripts/cmlcompile.py rules.cml
Compiling rules, please wait......(15.61 sec) Done.
Using defconfig
python2 -O scripts/cmlconfigure.py -t -DX86 -B 2.4.16 -I config.out  rules.out
Side effects:
ISA=y (deduced from X86)

... oldconfig output skipped

Saving config.out......(0.80 sec) Done.
python2 -O scripts/configtrans.py -h include/linux/autoconf.h -s .config config.out

# cp config.out oldconfig.out
# make menuconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
/build/kaos/2.4.16-cml2/include
python2 -O scripts/cmlconfigure.py -c  -DX86 -B 2.4.16 -i config.out  rules.out
Side effects:
ISA=y (deduced from X86)
Side effects from config.out:
Tristate symbols won't default to M.
SCSI=y (deduced from USB_STORAGE)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDEDISK)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDECD)
PCMCIA=y (deduced from NET_PCMCIA)
NET_ETHERNET=y (deduced from NET_PCMCIA)
UNIX98_PTYS=y (deduced from DEVPTS_FS)

=====

Why are those deduction messages appearing in menuconfig? I just did make oldconfig, the config should be stable. I did not change anything in menuconfig, just saved it.

=====

# cp config.out menuconfig.out
# diff -u oldconfig.out menuconfig.out
--- oldconfig.out	Wed Dec 12 21:13:26 2001
+++ menuconfig.out	Wed Dec 12 21:13:46 2001
@@ -79,6 +79,7 @@
 CONFIG_MWINCHIP3D=n
 CONFIG_MCYRIXIII=n

+CONFIG_MICROCODE=n
CONFIG_TOSHIBA=n
CONFIG_I8K=n
CONFIG_X86_MSR=n
@@ -92,6 +93,8 @@
CONFIG_HIGHMEM64G=n

CONFIG_MTRR=y
+CONFIG_X86_UP_APIC=n
+CONFIG_X86_UP_IOAPIC=n
CONFIG_MULTIQUAD=n

@@ -144,6 +147,7 @@
# SCSI disk support
#
CONFIG_BLK_DEV_SD=y
+CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=n
CONFIG_ST_EXTRA_DEVS=2
CONFIG_BLK_DEV_SR=n
@@ -389,6 +393,7 @@
# IDE block devices
#
CONFIG_BLK_DEV_IDE=y
+CONFIG_BLK_DEV_HD_ONLY=n

#
# IDE options -- see Documentation/ide.txt for help/info

=====

Why is the output after menuconfig WITH NO CHANGES different from the oldconfig that went into menuconfig?

=====

# make menuconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
/build/kaos/2.4.16-cml2/include
python2 -O scripts/cmlconfigure.py -c  -DX86 -B 2.4.16 -i config.out  rules.out
Side effects:
ISA=y (deduced from X86)
Side effects from config.out:
Tristate symbols won't default to M.
SCSI=y (deduced from USB_STORAGE)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDEDISK)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDECD)
PCMCIA=y (deduced from NET_PCMCIA)
NET_ETHERNET=y (deduced from NET_PCMCIA)
UNIX98_PTYS=y (deduced from DEVPTS_FS)

=====

Why are those deductions appearing again? I checked the input config, all those options were already set to y.

=====

# make oldconfig
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
/build/kaos/2.4.16-cml2/include
python2 -O scripts/cmlconfigure.py -t -DX86 -B 2.4.16 -I config.out  rules.out
Side effects:
ISA=y (deduced from X86)
Side effects from config.out:
Tristate symbols won't default to M.
SCSI=y (deduced from USB_STORAGE)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDEDISK)
BLK_DEV_IDE=y (deduced from BLK_DEV_IDECD)
PCMCIA=y (deduced from NET_PCMCIA)
NET_ETHERNET=y (deduced from NET_PCMCIA)
UNIX98_PTYS=y (deduced from DEVPTS_FS)

... oldconfig output skipped

Saving config.out......(0.72 sec) Done.
python2 -O scripts/configtrans.py -h include/linux/autoconf.h -s .config config.out

# diff -u config.out menuconfig.out
--- config.out	Wed Dec 12 21:14:35 2001
+++ menuconfig.out	Wed Dec 12 21:13:46 2001
@@ -79,6 +79,7 @@
 CONFIG_MWINCHIP3D=n
 CONFIG_MCYRIXIII=n

+CONFIG_MICROCODE=n
CONFIG_TOSHIBA=n
CONFIG_I8K=n
CONFIG_X86_MSR=n
@@ -92,6 +93,8 @@
CONFIG_HIGHMEM64G=n

CONFIG_MTRR=y
+CONFIG_X86_UP_APIC=n
+CONFIG_X86_UP_IOAPIC=n
CONFIG_MULTIQUAD=n

@@ -144,8 +147,11 @@
# SCSI disk support
#
CONFIG_BLK_DEV_SD=y
+CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=n
+CONFIG_ST_EXTRA_DEVS=2
CONFIG_BLK_DEV_SR=n
+CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=n
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
@@ -178,6 +184,7 @@
CONFIG_SCSI_DTC3280=n
CONFIG_SCSI_EATA=n
CONFIG_SCSI_FUTURE_DOMAIN=n
+CONFIG_SCSI_FD_MCS=n
CONFIG_SCSI_GDTH=n
CONFIG_SCSI_GENERIC_NCR5380=n
CONFIG_SCSI_INITIO=n
@@ -187,6 +194,7 @@
CONFIG_SCSI_NCR53C406A=n
CONFIG_SCSI_SYM53C416=n
CONFIG_SCSI_SIM710=n
+CONFIG_SCSI_NCR_D700=n
CONFIG_SCSI_NCR53C7xx=n
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_SYM53C8XX_2=n
@@ -197,6 +205,8 @@
CONFIG_SCSI_NCR53C8XX=n
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=20
+CONFIG_SCSI_IBMMCA=n
+CONFIG_SCSI_MCA_53C9X=n
CONFIG_SCSI_PAS16=n
CONFIG_SCSI_PCI2000=n
CONFIG_SCSI_PCI2220I=n
@@ -286,6 +296,7 @@
CONFIG_USB_CDCETHER=n
CONFIG_USB_USBNET=n
CONFIG_USB_PEGASUS=n
+CONFIG_USB_USS720=n
CONFIG_USB_SERIAL=n
CONFIG_USB_RIO500=n

@@ -323,6 +334,55 @@

#
+# Memory Technology Device (MTD) support
+#
+CONFIG_MTD_DEBUG=n
+CONFIG_MTD_PARTITIONS=n
+CONFIG_MTD_CHAR=n
+CONFIG_MTD_BLOCK=n
+CONFIG_FTL=n
+CONFIG_MTD_CFI=n
+CONFIG_MTD_JEDECPROBE=n
+CONFIG_MTD_CFI_ADV_OPTIONS=n
+CONFIG_MTD_CFI_INTELEXT=n
+CONFIG_MTD_CFI_AMDSTD=n
+CONFIG_MTD_SHARP=n
+CONFIG_MTD_RAM=n
+CONFIG_MTD_ROM=n
+CONFIG_MTD_JEDEC=n
+CONFIG_MTD_ABSENT=n
+CONFIG_MTD_OBSOLETE_CHIPS=n
+
+#
+# Drivers for chip mappings
+#
+CONFIG_MTD_PHYSMAP=n
+
+CONFIG_MTD_NORA=n
+CONFIG_MTD_PNC2000=n
+CONFIG_MTD_SC520CDP=n
+CONFIG_MTD_NETSC520=n
+CONFIG_MTD_SBC_GXX=n
+CONFIG_MTD_ELAN_104NC=n
+CONFIG_MTD_SA1100=n
+CONFIG_MTD_DC21285=n
+CONFIG_MTD_IQ80310=n
+CONFIG_MTD_CSTM_MIPS_IXX=n
+CONFIG_MTD_L440GX=n
+CONFIG_MTD_OCELOT=n
+CONFIG_MTD_PMC551=n
+CONFIG_MTD_SLRAM=n
+CONFIG_MTD_LART=n
+CONFIG_MTD_MTDRAM=n
+CONFIG_MTD_BLKMTD=n
+CONFIG_MTD_DOC1000=n
+CONFIG_MTD_DOC2000=n
+CONFIG_MTD_DOC2001=n
+CONFIG_MTD_DOCPROBE_ADVANCED=n
+CONFIG_MTD_NAND=n
+
+
+#
# Block devices
#
CONFIG_BLK_DEV_FD=y
@@ -333,6 +393,7 @@
# IDE block devices
#
CONFIG_BLK_DEV_IDE=y
+CONFIG_BLK_DEV_HD_ONLY=n

#
# IDE options -- see Documentation/ide.txt for help/info
@@ -391,6 +452,7 @@
CONFIG_BLK_DEV_Q40IDE=n CONFIG_BLK_DEV_MPC8xx_IDE=n

+CONFIG_BLK_DEV_PS2=n
CONFIG_AMIGA_Z2RAM=n
CONFIG_ATARI_ACSI=n
CONFIG_BLK_CPQ_DA=n
@@ -426,11 +488,21 @@
CONFIG_IP_PNP=n
CONFIG_NET_IPIP=n
CONFIG_NET_IPGRE=n
+CONFIG_NET_IPGRE_BROADCAST=n
CONFIG_IP_MROUTE=n
CONFIG_ARPD=n
CONFIG_INET_ECN=n
CONFIG_SYN_COOKIES=n

+#
+# IP netfilter configuration
+#
+CONFIG_IP_NF_CONNTRACK=n
+CONFIG_IP_NF_QUEUE=n
+CONFIG_IP_NF_IPTABLES=n
+CONFIG_IP_NF_COMPAT_IPCHAINS=n
+
+
CONFIG_PPP=n
CONFIG_SLIP=n
CONFIG_PACKET=y
@@ -464,6 +536,7 @@
CONFIG_BONDING=n
CONFIG_TUN=n
CONFIG_EQUALIZER=n
+CONFIG_ETHERTAP=n
CONFIG_NET_SB1000=n
CONFIG_NET_ETHERNET=y

@@ -500,6 +573,9 @@
CONFIG_AT1700=n
CONFIG_DEPCA=n
CONFIG_HP100=n
+CONFIG_SKMC=n
+CONFIG_NE2_MCA=n
+CONFIG_IBMLANA=n
CONFIG_E2100=n
CONFIG_EWRK3=n
CONFIG_EEXPRESS=n
@@ -516,6 +592,7 @@
CONFIG_AC3200=n
CONFIG_DE4X5=n
CONFIG_DGRS=n
+CONFIG_NE3210=n
CONFIG_ES3210=n
CONFIG_PCNET32=n
CONFIG_ADAPTEC_STARFIRE=n
@@ -524,6 +601,7 @@
CONFIG_DE2104X=n
CONFIG_TULIP=n
CONFIG_EEPRO100=y
+CONFIG_LNE390=n
CONFIG_FEALNX=n
CONFIG_NATSEMI=n
CONFIG_NE2K_PCI=n
@@ -573,6 +651,7 @@
CONFIG_PCMCIA_XIRC2PS=n
CONFIG_PCMCIA_AXNET=n
CONFIG_PCMCIA_IBMTR=n
+CONFIG_PCMCIA_XIRTULIP=n
CONFIG_PCMCIA_XIRCOM=n
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=y
@@ -583,6 +662,23 @@

+#
+# ATM drivers
+#
+CONFIG_ATM_TCP=n
+CONFIG_ATM_LANAI=n
+CONFIG_ATM_ENI=n
+CONFIG_ATM_ZATM=n
+CONFIG_ATM_FIRESTREAM=n
+CONFIG_ATM_NICSTAR=n
+CONFIG_ATM_IDT77252=n
+CONFIG_ATM_AMBASSADOR=n
+CONFIG_ATM_HORIZON=n
+CONFIG_ATM_IA=n
+CONFIG_ATM_FORE200E_MAYBE=n
+CONFIG_PPPOATM=n
+
+

#
# Sound, ham radio, and telephony
@@ -609,6 +705,7 @@
CONFIG_SOUND_TRIDENT=n
CONFIG_SOUND_MSNDCLAS=n
CONFIG_SOUND_MSNDPIN=n
+CONFIG_MSND_FIFOSIZE=128
CONFIG_SOUND_OSS=n
CONFIG_DMASOUND=n
CONFIG_SOUND_TVMIXER=n
@@ -636,6 +733,8 @@
CONFIG_ATOMWIDE_SERIAL=n
CONFIG_DUALSP_SERIAL=n
CONFIG_SERIAL_ACPI=n
+CONFIG_SERIAL_EXTENDED=n
+CONFIG_SERIAL_NONSTANDARD=n
CONFIG_SMC2_UART=n
CONFIG_USE_SCC_IO=n
CONFIG_SUN3X_ZS=n
@@ -724,6 +823,7 @@
# QIC tape support
#
CONFIG_QIC02_TAPE=n
+CONFIG_QIC02_DYNCONF=n
CONFIG_FTAPE=n
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=n

=====

OUCH! The output from make menuconfig has significantly more options than make oldconfig when given exactly the same input. I thought one of the selling points for CML2 was different front ends but with identical back end processing. I don't like the way that the resulting config varies when fed to different front ends.

#2 lore raw
In reply to Eric S. Raymond

Keith Owens <[email protected]>:

Quoted 2 lines

Dangling symlink kernel-tree/scripts/tree.py breaks the CML2 install, rm kernel-tree/scripts/tree.py first.

Fixed.

Quoted 3 lines

There are still discrepancies between the output produced by different forms of make *config. I am also seeing spurious deduction messages which may be related or may be a separate problem.

Separate problem.

Quoted 3 lines

Why are those deduction messages appearing in menuconfig? I just did make oldconfig, the config should be stable. I did not change anything in menuconfig, just saved it.

The deduction messages are happening because the side-effect forcing logic fires whenever a symbol is set. It has no way of knowing whether or not the forced symbol will occur later in the config being read. This

Quoted 2 lines

Why is the output after menuconfig WITH NO CHANGES different from the oldconfig that went into menuconfig?

I think it's because of the different timing of menu visits (forcing computation of choice-menu defaults at different times). I'm going to run some experiments to see if I can pin this down.

Signature · 4 lines
		<a href="http://www.tuxedo.org/~esr/">Eric S. Raymond</a>

"The state calls its own violence `law', but that of the individual `crime'"
	-- Max Stirner
#3 lore raw
In reply to Eric S. Raymond

Keith Owens <[email protected]>:

Quoted 5 lines

OUCH! The output from make menuconfig has significantly more options than make oldconfig when given exactly the same input. I thought one of the selling points for CML2 was different front ends but with identical back end processing. I don't like the way that the resulting config varies when fed to different front ends.

Not a big deal -- all the produced config.outs are logically equivalent. Your differences all consist of symbols saved out as n in one version and not saved at all in the other. It *would* be serious cause for alarm if that were not the case.

The simplification in the saveability-predicate logic I just did for 1.9.8 made may help solve this problem.

Signature · 6 lines
		<a href="http://www.tuxedo.org/~esr/">Eric S. Raymond</a>

.. a government and its agents are under no general duty to 
provide public services, such as police protection, to any 
particular individual citizen...
        -- Warren v. District of Columbia, 444 A.2d 1 (D.C. App.181)
#4 lore raw
In reply to Eric S. Raymond
Quoted 8 lines · Eric S. Raymond

Keith Owens <[email protected]>:

Quoted 5 lines

OUCH! The output from make menuconfig has significantly more options than make oldconfig when given exactly the same input. I thought one of the selling points for CML2 was different front ends but with identical back end processing. I don't like the way that the resulting config varies when fed to different front ends.

Not a big deal -- all the produced config.outs are logically equivalent.

Not a big deal in theory, maybe, but it is very convenient to use diff to compare .config files, and diff doesn't know about logical equivalence.

Signature · 3 lines
Bjorn Helgaas - [email protected]
Linux Systems Operation R&D
Hewlett-Packard