Skip to contentSkip to conversation

ECP parport, howto?

DISCUSSION Gregoire Favre 1 participant 1 message Dec 12, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have an asus P2B-ls with a parport that should be ECP (and that what I set in BIOS), when I load the modules parport, parport_pc and ppdev:

parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver

Is there something special to do to obtain ECP capabilities (I need it to run VMWARE which I would like to try...).

I have already tried to give it the dma 3 which is reserved for parport. /proc/interrupts:

CPU0

  0:     586491          XT-PIC  timer
  1:      11301          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:     390441          XT-PIC  aic7xxx, usb-uhci, saa7146(1)
  7:          1          XT-PIC  parport0
  8:          1          XT-PIC  rtc
 10:      12412          XT-PIC  eth0, bttv
 11:       3693          XT-PIC  EMU10K1
 12:      31486          XT-PIC  PS/2 Mouse
 14:    2608574          XT-PIC  ide0
 15:      67196          XT-PIC  ide1
NMI:          0 
LOC:     586430 
ERR:          0
MIS:          0

Thanks you very much,

Gr�goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]