sr: unaligned transfer
Anyone else seeing this? With kernel version 2.5.1, I get several instances of
sr: unaligned transfer
followed by
Unable to identify CD-ROM format.
whenever I try to mount a CD-ROM. This is something new with 2.5.1 (probably the new bio code), as all prior kernel versions (non-pre) work fine. SCSI driver is aic7xxx.
Signature · 4 lines
----------------------------------------------------------------------- Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org [email protected] -----------------------------------------------------------------------
Quoted 5 lines · Bob_Tracy
Anyone else seeing this? With kernel version 2.5.1, I get several instances of
sr: unaligned transfer
Quoted 7 lines
followed by
Unable to identify CD-ROM format.
whenever I try to mount a CD-ROM. This is something new with 2.5.1 (probably the new bio code), as all prior kernel versions (non-pre) work fine. SCSI driver is aic7xxx.
What fs? Older sr padded front and back of request to correctly align it, but I removed that code. Please try and mount with -o loop instead.
Signature · 1 line
Jens Axboe
conclusion: arp.c *must* be (still) defective
Dear Mailing List,
I'm having great problems with ARP. Frankly, kernel 2.4.16 never gets the proper arp address of the next-hop-router, no matter what I try.
My equipment:
Suse 7.3 , kernel upgraded to 2.4.16
3com 3c509-b tx isapnp ethcard eth0
msi-something geforce2mx 200
sb16 isapnp
thunderbird 1.2 ghz
gigabyte 7ixe4 motherboard
512 mb ram @ 100 mhz fsb
I can only ping the IP of the network card itself.
Whenever I ping my nexthop router (ip: x.x.x.1) i get a pause of a few seconds, then a whole sequence of "Destination unreachable". Looking at the arp cache using "arp -a", I see that the arp cache is always incomplete (always KEEPS being incomplete).
Any clue is greatly appreciated, but I do suspect that the kernel 2.4.16's ARP code is buggy since Win98 , win2k etc works flawlessly.
Yours
Alex
Re: conclusion: arp.c *must* be (still) defective
Quoted 4 lines
Whenever I ping my nexthop router (ip: x.x.x.1) i get a pause of a few seconds, then a whole sequence of "Destination unreachable". Looking at the arp cache using "arp -a", I see that the arp cache is always incomplete (always KEEPS being incomplete).
Sounds like you have the card on the wrong port or the IRQ not set in the BIOS to be routed to ISA
Re: conclusion: arp.c *must* be (still) defective
Quoted 8 lines · Alan Cox
Quoted 4 lines
Whenever I ping my nexthop router (ip: x.x.x.1) i get a pause of a few seconds, then a whole sequence of "Destination unreachable". Looking at the arp cache using "arp -a", I see that the arp cache is always incomplete (always KEEPS being incomplete).
Sounds like you have the card on the wrong port or the IRQ not set in the BIOS to be routed to ISA
Sir! It's PLUG AND PLAY! Isapnp! I ought not to care about IRQ or Bios?
Yours
Alex
Re: conclusion: arp.c *must* be (still) defective
Quoted 4 lines
Quoted 2 lines
Sounds like you have the card on the wrong port or the IRQ not set in the BIOS to be routed to ISA
Sir! It's PLUG AND PLAY! Isapnp! I ought not to care about IRQ or Bios?
IMHO you have an overdeveloped faith in technology 8)
Things to check
1. Does tcpdump show anything if you ping the box from another machine
2. Is the link light on
3. Does the irq count in /proc/interrupts for the card rise
appropriately ?
4. What does the 3c5x9 diagnostic tool say (http://www.scyld.com)
The reason I ask is that Linux 2.2 and on some platforms 2.4 will be relying on BIOS IRQ routing where Windows 9x will do the work itself. So I've seen precisely these symptoms before
Quoted 5 lines · Jens Axboe
Quoted 2 lines · Bob_Tracy
sr: unaligned transfer
Unable to identify CD-ROM format.What fs?
iso9660.
Quoted 1 line
Please try and mount with -o loop instead.
??? Sorry if I'm being dense, but the file system is on a physical
CD: it isn't an image file. The mount command that has worked for me in the past is
mount -t iso9660 /dev/sr1 /mnt -r
The sr1 device isn't a typo: it's my cd writer.
Signature · 4 lines
----------------------------------------------------------------------- Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org [email protected] -----------------------------------------------------------------------
Quoted 10 lines · Bob_Tracy
Quoted 1 line · Jens Axboe
Please try and mount with -o loop instead.
??? Sorry if I'm being dense, but the file system is on a physical
CD: it isn't an image file. The mount command that has worked for me in the past ismount -t iso9660 /dev/sr1 /mnt -rThe sr1 device isn't a typo: it's my cd writer.
I wouldn't presume to think I know the details here, but as far as I can tell the plain mount command treats it like a device, while using the loop device treats it like a file.
It should still be possible to read from the CD like normal, but any CD-specific fucntions will likely be disabled, although those are probably implemented as ioctls anyway.
So.. try it, and see what you get.
Quoted 11 lines · Bob_Tracy
Quoted 5 lines · Jens Axboe
Quoted 2 lines · Bob_Tracy
sr: unaligned transfer
Unable to identify CD-ROM format.What fs?
iso9660.
Quoted 1 line
Please try and mount with -o loop instead.
Quoted 7 lines
??? Sorry if I'm being dense, but the file system is on a physical
CD: it isn't an image file. The mount command that has worked for me in the past ismount -t iso9660 /dev/sr1 /mnt -rThe sr1 device isn't a typo: it's my cd writer.
mount -o loop -t iso9660 /dev/scd1 /mnt
Signature · 1 line
Jens Axboe
Quoted 9 lines · Jens Axboe
Quoted 6 lines · Bob_Tracy
Quoted 5 lines · Jens Axboe
Quoted 2 lines · Bob_Tracy
sr: unaligned transfer
Unable to identify CD-ROM format.Please try and mount with -o loop instead.
mount -o loop -t iso9660
/dev/scd1/mnt
I still get the "sr: unaligned transfer" message, and as an added bonus, the mount hangs... Can't interrupt it, can't kill it :-(.
Next? :-)
Signature · 4 lines
----------------------------------------------------------------------- Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org [email protected] -----------------------------------------------------------------------