Problems with ATA hard disk(s)
Good day,
I am a beginner when it comes to Linux, so please bear with me.
I have two ATA hard disks. Proc/../model says Maxtor 91021U2 and ST31722A respectively. The /dev/hda one is Maxtor 91021U2. The mainboard model is P5I430TX TITANIUM IB and CPU is Intel P200 MMX. Softwarewise I am using ReiserFS and 2.4.16 version of the kernel.
I tried to tune HDD performance, so I put this into /etc/rc.local:/sbin/hdparm -c1 -A1 -m16 -d1 /dev/hda
When I look at the HDD settings after boot, I see that almost everything is turned off:
[root@tm-68-65 grega]# /sbin/hdparm /dev/hda
/dev/hda:
multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)
geometry = 1245/255/63, sectors = 20010816, start = 0
In the logs I have bunch of such errors:
messages:Dec 21 16:21:27 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:21:27 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:21:27 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:21:27 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:22:41 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:22:41 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:22:41 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 16:22:42 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 17:48:56 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 17:48:56 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 17:48:56 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
messages:Dec 21 17:48:56 tm-68-65 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
If you need more info, don't hesitate to ask. Please CC me, as I am not on the list.
Regards,
Grega Fajdiga
Quoted 1 line
I am a beginner when it comes to Linux, so please bear with me.
please read the FAQ.
Quoted 2 lines
When I look at the HDD settings after boot, I see that almost everything is turned off:
I'm guessing you've failed to set the relevant ide-related CONFIG_ settings. you definitely want the piix driver, and almost certainly also all the yes-really-use-dma-by-default ones.
Quoted 2 lines
messages:Dec 21 16:21:27 tm-68-65 kernel: hda:
dma_intr: error=0x84 { DriveStatusError BadCRC }
Good day,
Quoted 2 lines
please read the FAQ.
I will
Quoted 3 lines
I'm guessing you've failed to set the relevant ide-related
CONFIG_settings. you definitely want the piix driver, and almost certainly also all the yes-really-use-dma-by-default ones.
Thank you, this indeed solved my problems.
Regards,
Grega Fajdiga