Skip to contentSkip to conversation

IDE CDROM locks the system hard on media error

DISCUSSION Douglas Gilbert 3 participants 4 messages Dec 24, 2001 – Dec 25, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 13 lines

I am catalogizing my set of CDs and so I have tortured my CD drive with a bunch of less-than-optimal CDs. I had two hard lockups most probably connected to problematic media.

The last message in log is

kernel: scsi0: ERROR on channel 0, id 0, lun 0,
CDB: Request Sense 00 00 00 40 00
kernel: Current sd0b:00: sense key Medium Error
kernel: Additional sense indicates No seek complete
kernel: I/O error: dev 0b:00, sector 504
kernel: ISOFS: unable to read i-node block

Quoted 6 lines

Shortly (but not immediately, the kernel tried a bit more to get some data from the drive) after that the system froze - not even SysRq worked.

I am using vanilla 2.4.17, hdc=ide-scsi, my drive is Mitsumi CR-4804TE, motherboard is Abit BP6 SMP, Intel PIIX4 IDE controller.

Does turning off or restricting the DMA mode using either one of these help?

    hdparm -d0 -c1 /dev/hdc 
    hdparm -d 1 -X 34 /dev/hdc

Doug Gilbert

#1 lore raw

Hello,

Quoted 6 lines
Quoted 2 lines

I am using vanilla 2.4.17, hdc=ide-scsi, my drive is Mitsumi CR-4804TE, motherboard is Abit BP6 SMP, Intel PIIX4 IDE controller.

Does turning off or restricting the DMA mode using either one of these help?

    hdparm -d0 -c1 /dev/hdc 

This seems to help - I tried the most problematic CD several times, got the error messages, but it did not froze.

Thanks - I didn't even know that it defaults to DMA on CD-ROMs...

Quoted 1 line
    hdparm -d 1 -X 34 /dev/hdc

This drive cannot do more than mdma1 (at least according to hdparm -i).

Regards

Signature · 1 line
                                       Stano
#2 lore raw

Do you have multiple CD/DVD-R/ROM/R's? This happened today to me when I was installing Myth II and Quake III at the same time.

First CDROM according to "cat /proc/ide/hdc/model" is pretty generic:
ATAPI 48X CDROM

Second CD-RW according to "cat /proc/ide/hdd/model" is a: LITE-ON LTR-16102B

Some stuff ala syslog:

Dec 24 13:26:33 fux0r kernel: cdrom: open failed.
Dec 24 13:26:45 fux0r kernel: cdrom: open failed.
Dec 24 13:29:22 fux0r su(pam_unix)[27872]: session closed for user root
Dec 24 13:31:25 fux0r kernel: scsi : aborting command due to timeout :
pid 34319, scsi1, channel 0, id 0, lun 0 Read (10) 00 00 00 00 42 00 00
01 00 
Dec 24 13:31:25 fux0r kernel: hdc: timeout waiting for DMA
Dec 24 13:31:25 fux0r kernel: ide_dmaproc: chipset supported
ide_dma_timeout func only: 14
Dec 24 13:31:25 fux0r kernel: scsi : aborting command due to timeout :
pid 34321, scsi1, channel 0, id 1, lun 0 Read (10) 00 00 00 c2 e7 00 00
01 00 
Dec 24 13:31:26 fux0r kernel: hdc: status timeout: status=0xd0 { Busy }
Dec 24 13:31:26 fux0r kernel: hdc: drive not ready for command
Dec 24 13:31:30 fux0r kernel: hdc: ATAPI reset complete
Dec 24 13:31:31 fux0r kernel: hdc: irq timeout: status=0xc0 { Busy }
Dec 24 13:31:31 fux0r kernel: hdc: ATAPI reset complete

the next thing we see is syslogd restarting (after rebooting)

Thanks,
Brian

Quoted 27 lines · Stanislav Meduna

Hello,

Quoted 6 lines
Quoted 2 lines

I am using vanilla 2.4.17, hdc=ide-scsi, my drive is Mitsumi CR-4804TE, motherboard is Abit BP6 SMP, Intel PIIX4 IDE controller.

Does turning off or restricting the DMA mode using either one of these help?

    hdparm -d0 -c1 /dev/hdc 

This seems to help - I tried the most problematic CD several times, got the error messages, but it did not froze.

Thanks - I didn't even know that it defaults to DMA on CD-ROMs...

Quoted 1 line
    hdparm -d 1 -X 34 /dev/hdc

This drive cannot do more than mdma1 (at least according to hdparm -i).

Regards

Signature · 7 lines
                                       Stano

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
#3 lore raw
Quoted 1 line

Do you have multiple CD/DVD-R/ROM/R's?

No. I have two disks on primary IDE and one CD-R that is alone on the secondary.

Quoted 2 lines

This happened today to me when I was installing Myth II and Quake III at the same time.

:-)))

Regards

Signature · 1 line
                                        Stano