Skip to contentSkip to conversation

severe slowdown with 2.4 series w/heavy disk access

DISCUSSION Guillaume Morin 1 participant 1 message Dec 26, 2001

lore
Share & tools
lore
#0 lore raw

FYI,

I experience the same problem with recent kernels. I run 2.4.16. When I copy a file from one hd to another, ls'ing a empty directory takes about 6-7 secs.

Disks are

/dev/hda:

non-removable ATA device, with non-removable media

        Model Number:           QUANTUM FIREBALLP LM15
        Serial Number:          883011568812
        Firmware Revision:      A35.0700
Standards:
        Used: ATA/ATAPI-5 T13 1321D revision 1
        Supported: 1 2 3 4 5
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        bytes/track:    32256           (obsolete)
        bytes/sector:   21298           (obsolete)

current sector capacity: 16514064
LBA user addressable sectors = 29336832
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 1900.0kB ECC bytes: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific
minimum
r/w multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
SMART feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
12min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct

/dev/hdd:

non-removable ATA device, with non-removable media

        Model Number:           WDC WD400BB-00CLB0
        Serial Number:          WD-WMAAN1229771
        Firmware Revision:      05.04E05

Standards:
Supported: 1 2 3 4 5
Likely used: 5
Configuration:

        Logical         max     current
        cylinders       16383   17475
        heads           16      15
        sectors/track   63      63
        bytes/track:    57600           (obsolete)
        bytes/sector:   600             (obsolete)

current sector capacity: 16513875
LBA user addressable sectors = 78165360
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 2048.0kB ECC bytes: 40 Queue depth: 1
Standby timer values: spec'd by standard, with device specific
minimum
r/w multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
SMART feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1 determined by the jumper
Checksum: correct

at boot :

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=1826/255/63, UDMA(66)
hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33)

Let me know if you want me to test patches or provide more information.

Regards,

Signature · 3 lines
Guillaume Morin <[email protected]>

                             La vie est facétieuse