Skip to contentSkip to conversation

/etc/security/default_context vs. /etc/security/default_contexts

DISCUSSION Charles Levert 3 participants 5 messages Jan 7, 2002 – Jan 16, 2002 SELinux security module

lore
Share & tools
lore
#0 lore raw

Hi.

In libsecure, what is the difference between the following two files (notice the final "s")?

/etc/security/default_context
as used by get_default_user_sid() and get_user_sid()

/etc/security/default_contexts (and ~user/.default_contexts)
as used by get_config_priority()

Also, what is the difference between get_default_user_sid() and get_user_sid() ?

Thanks.

Charles

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#1 lore raw
Quoted 8 lines · Charles Levert

In libsecure, what is the difference between the following two files (notice the final "s")?

/etc/security/default_context
as used by get_default_user_sid() and get_user_sid()

/etc/security/default_contexts (and ~user/.default_contexts)
as used by get_config_priority()

The latter configuration file (and its associated library functions) is intended to replace the former configuration file (and its associated library functions) at some point in the future. At present, none of the modified programs are using the latter set of library functions or their configuration file. The latter set of functions use the security_get_user_sids interface to obtain a list of legal SIDs for the user that can be reached from the current process (login, sshd, crond) and then uses the /etc/security/default_contexts and the optional ~user/.default_contexts files to prioritize these lists for presentation to the user in a menu or for selecting a default. The /etc/security/default_contexts configuration file specifies a prioritization based on the current process context, e.g. you can specify different prioritizations depending on whether you are logging in via login or via sshd. It does not require a separate entry for each user, unlike the current /etc/security/default_context and cron_context files.

If you hate maintaining the per-user entries in default_context and cron_context and would like to help review, possibly refine, and test these functions and also work on changing the login, sshd, and crond programs to use these functions insted of the old functions, let us know. This work was supposed to be done by the person who developed both the old and the new functions, but that person hasn't been able to work on SELinux for a while. I can send you a patch to login by the original developer that shows how they are intended to be used.

Quoted 2 lines

Also, what is the difference between get_default_user_sid() and get_user_sid() ?

get_default_user_sid simply returns the default security context for the user. It isn't interactive. get_user_sid is interactive and permits the user to either accept the default security context or specify a different one.

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#2 lore raw

HI
I have been playing with > get_user_sids from the libsecure test dir.

I tried

Quoted 1 line

./get_user_sids system_u:system_r:local_login_t root

it returns

SID 277 -> Scontext root:sysadm_r:sysadm_t
SID 275 -> Scontext root:user_r:user_t

OK the different values are returned, but how in the are may users defined genericly in the policy file?

example: zot is added thur kerberos or nis+, how is the user zot found in the policy ?

Quoted 1 line

./get_user_sids system_u:system_r:local_login_t zot

return NULL

Shaun

Quoted 17 lines

The latter configuration file (and its associated library functions) is intended to replace the former configuration file (and its associated library functions) at some point in the future. At present, none of the modified programs are using the latter set of library functions or their configuration file. The latter set of functions use the security_get_user_sids interface to obtain a list of legal SIDs for the user that can be reached from the current process (login, sshd, crond) and then uses the /etc/security/default_contexts and the optional ~user/.default_contexts files to prioritize these lists for presentation to the user in a menu or for selecting a default. The /etc/security/default_contexts configuration file specifies a prioritization based on the current process context, e.g. you can specify different prioritizations depending on whether you are logging in via login or via sshd. It does not require a separate entry for each user, unlike the current /etc/security/default_context and cron_context files.

Quoted 9 lines

If you hate maintaining the per-user entries in default_context and cron_context and would like to help review, possibly refine, and test these functions and also work on changing the login, sshd, and crond programs to use these functions insted of the old functions, let us know. This work was supposed to be done by the person who developed both the old and the new functions, but that person hasn't been able to work on SELinux for a while. I can send you a patch to login by the original developer that shows how they are intended to be used.

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#3 lore raw
Quoted 2 lines · Shaun Savage

OK the different values are returned, but how in the are may users defined genericly in the policy file?

The new libsecure functions and the /etc/security/default_contexts file doesn't address the issue of a generic user. It merely eliminates the need to maintain per-user entries in default_context and cron_context. There is still the problem of maintaining policy/users. As Mark Westerman suggested (and I agreed), this can be addressed through the definition of a generic user and some minor modifications to the libsecure functions to use this as the default, as long as you do not need to distinguish among such users in the policy. If you want to maintain distinct role sets for these users, then you will need to update policy/users in some manner.

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#4 lore raw

What is it format of the /etc/security/default_contexts? It would be easy to convert the utils to the new get_user_sids, but the format of the file for setting the default would need to be defined.

Ideas?

Shaun

Quoted 11 lines

The new libsecure functions and the /etc/security/default_contexts file doesn't address the issue of a generic user. It merely eliminates the need to maintain per-user entries in default_context and cron_context. There is still the problem of maintaining policy/users. As Mark Westerman suggested (and I agreed), this can be addressed through the definition of a generic user and some minor modifications to the libsecure functions to use this as the default, as long as you do not need to distinguish among such users in the policy. If you want to maintain distinct role sets for these users, then you will need to update policy/users in some manner.

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.