PROBLEM: Oops in 2.4.18-pre4
1. I have a problem with loading the analog module for joystick support.
2. Full description
This problem also exists in 2.4.17. I have an Aureal Vortex 1 PCI soundcard and compiled all joystick support as module. When I try to load the analog module, I get an oops:
bifrost:~# modprobe joydev
bifrost:~# modprobe pcigame
PCI: Found IRQ 11 for device 00:10.0
gameport0: Aureal Semiconductor Vortex 1 at pci00:10.0 speed 1657 kHz
bifrost:~# modprobe gameport
bifrost:~# modprobe analog
Unable to handle kernel NULL pointer dereference at virtual address
00000000
printing eip:
d884312a
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d884312a>] Not tainted
EFLAGS: 00010246
eax: 00000000 ebx: d4f32da0 ecx: 00000001 edx: 00000000
esi: d8867c64 edi: d46cf000 ebp: d4f32da0 esp: d6547eb8
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 429, stackpage=d6547000)
Stack: d88412fc d4f32da0 00000001 d4f32da0 d886731d d4f32da0 d8867c64
00000001
d4f32da0 d8867c64 d46cf88c 00001d00 d6546000 d88675fe d4f32da0
d8867c64
d46cf000 d4f32da0 d8867c64 00000001 00001d00 d46cf000
00001d00 d8841283
Call Trace: [<d88412fc>] [<d886731d>] [<d8867c64>] [<d8867c64>]
[<d88675fe>]
[<d8867c64>] [<d8867c64>] [<d8841283>] [<d8867c64>]
[<d8867817>] [<d8867c64>]
[<c011896d>] [<d8866060>] [<c0106e4b>]Code: 8b 00 c6 04 10 00 31 c0 c3 b8 ff ff ff ff c3 8d 76 00 83 ec Segmentation fault
I'm using sounddrivers from www.opensound.com, but I tried to load the joystick modules before loading soundmodules.
3. Kernel version
bifrost:/var/log# cat /proc/version Linux version 2.4.18-pre4 (root@bifrost) (gcc version 2.95.4 20011006 (Debian prerelease)) #2 SMP Thu Jan 17 17:13:57 CET 2002
4. Output of Oops
ksymoops 2.4.3 on i686 2.4.18-pre4. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-pre4/ (default)
-m /boot/System.map-2.4.18-pre4 (default)
Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.
Jan 17 14:46:04 bifrost kernel: Oops: 0000 Jan 17 14:46:04 bifrost kernel: CPU: 0 Jan 17 14:46:04 bifrost kernel: EIP: 0010:[<d884312a>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 Jan 17 14:46:04 bifrost kernel: EFLAGS: 00010246 Jan 17 14:46:04 bifrost kernel: eax: 00000000 ebx: d1e4fb60 ecx: 00000001 edx: 00000000 Jan 17 14:46:04 bifrost kernel: esi: d8867c64 edi: d0d7a000 ebp: d1e4fb60 esp: d0d5deb8 Jan 17 14:46:04 bifrost kernel: ds: 0018 es: 0018 ss: 0018 Jan 17 14:46:04 bifrost kernel: Process modprobe (pid: 589, stackpage=d0d5d000) Jan 17 14:46:04 bifrost kernel: Stack: d88412fc d1e4fb60 00000001 d1e4fb60 d886731d d1e4fb60 d8867c64 00000001 Jan 17 14:46:04 bifrost kernel: d1e4fb60 d8867c64 d0d7a88c 00001d00 d0d5c000 d88675fe d1e4fb60 d8867c64 Jan 17 14:46:04 bifrost kernel: d0d7a000 d1e4fb60 d8867c64 00000001 00001d00 d0d7a000 00001d00 d8841283 Jan 17 14:46:04 bifrost kernel: Call Trace: [<d88412fc>] [<d886731d>] [<d8867c64>] [<d8867c64>] [<d88675fe>] Jan 17 14:46:04 bifrost kernel: [<d8867c64>] [<d8867c64>] [<d8841283>] [<d8867c64>] [<d8867817>] [<d8867c64>] Jan 17 14:46:04 bifrost kernel: Code: 8b 00 c6 04 10 00 31 c0 c3 b8 ff
ff ff ff c3 8d 76 00 83 ec
Quoted 2 lines
Quoted 2 lines
EIP;
d884312a<[sndshield]udi_interruptible_sleep_on_timeout+1e/30> <=====
Trace; d88412fc <[gameport]gameport_open+14/40>
Trace; d886731c <[analog]analog_init_port+38/2d4>
Trace; d8867c64 <[analog]analog_dev+0/e>
Trace; d8867c64 <[analog]analog_dev+0/e>
Trace; d88675fe <[analog]analog_connect+46/d4>
Trace; d8867c64 <[analog]analog_dev+0/e>
Trace; d8867c64 <[analog]analog_dev+0/e>
Trace; d8841282 <[gameport]gameport_register_device+2e/3c> Trace; d8867c64 <[analog]analog_dev+0/e>
Trace; d8867816 <[analog]init_module+e/18>
Trace; d8867c64 <[analog]analog_dev+0/e>
Code; d884312a <[sndshield]udi_interruptible_sleep_on_timeout+1e/30> 00000000 <_EIP>:
Code; d884312a <[sndshield]udi_interruptible_sleep_on_timeout+1e/30> <=====
0: 8b 00 mov (%eax),%eax <=====
Code; d884312c <[sndshield]udi_interruptible_sleep_on_timeout+20/30>
2: c6 04 10 00 movb $0x0,(%eax,%edx,1)
Code; d8843130 <[sndshield]udi_interruptible_sleep_on_timeout+24/30>
6: 31 c0 xor %eax,%eax
Code; d8843132 <[sndshield]udi_interruptible_sleep_on_timeout+26/30>
8: c3 ret
Code; d8843132 <[sndshield]udi_interruptible_sleep_on_timeout+26/30>
9: b8 ff ff ff ff mov $0xffffffff,%eax
Code; d8843138 <[sndshield]udi_interruptible_sleep_on_timeout+2c/30>
e: c3 ret
Code; d8843138 <[sndshield]udi_interruptible_sleep_on_timeout+2c/30>
f: 8d 76 00 lea 0x0(%esi),%esi
Code; d884313c <[sndshield]udi_wake_up+0/38>
12: 83 ec 00 sub $0x0,%esp
1 warning issued. Results may not be reliable.
5. Environment
5.1. ver_linux output
bifrost:/usr/src/linux# sh scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux bifrost 2.4.18-pre4 #2 SMP Thu Jan 17 17:13:57 CET 2002 i686 unknown
Gnu C 2.95.4 Gnu make 3.79.1 binutils 2.11.90.0.31 util-linux 2.11h mount 2.11h modutils 2.4.10 e2fsprogs 1.25 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0.11 Modules Loaded softsynth a3dvortex audiobuf pnp midi ac97
soundbase sndshield analog gameport
5.2. /proc/cpuinfo
bifrost:/var/log# cat /proc/version Linux version 2.4.18-pre4 (root@bifrost) (gcc version 2.95.4 20011006 (Debian prerelease)) #2 SMP Thu Jan 17 17:13:57 CET 2002 bifrost:/var/log# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 5 model name : Pentium II (Deschutes) stepping : 2 cpu MHz : 451.030 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 897.84
5.3. /proc/modules
bifrost:/var/log# cat /proc/modules softsynth 109984 2 a3dvortex 32128 2 audiobuf 12320 2 [softsynth a3dvortex] pnp 50308 2 [a3dvortex] midi 30460 2 [softsynth a3dvortex pnp] ac97 8096 2 [a3dvortex] soundbase 622240 2 [softsynth a3dvortex audiobuf pnp midi ac97] sndshield 10668 0 [softsynth a3dvortex audiobuf pnp midi ac97 soundbase] analog 7424 (initializing) gameport 1564 0 [analog]
5.4. /proc/ioports and /proc/iomem
bifrost:/var/log# cat /proc/io iomem ioports bifrost:/var/log# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03e8-03ef : serial(set) 03f6-03f6 : ide0 03f8-03ff : serial(set) 0400-043f : Intel Corp. 82371AB PIIX4 ACPI 0440-045f : Intel Corp. 82371AB PIIX4 ACPI 0cf8-0cff : PCI conf1 b000-bfff : PCI Bus #01 bc00-bcff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X d800-d807 : Aureal Semiconductor Vortex 1 da00-da07 : Aureal Semiconductor Vortex 1 dc00-dc1f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) dc00-dc1f : ne2k-pci de00-de1f : Intel Corp. 82371AB PIIX4 USB de00-de1f : usb-uhci ffa0-ffaf : Intel Corp. 82371AB PIIX4 IDE ffa0-ffa7 : ide0 ffa8-ffaf : ide1
bifrost:/var/log# cat /proc/iomem 00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-17ffffff : System RAM 00100000-00273109 : Kernel code 0027310a-002e5cbf : Kernel data e5c00000-e5cfffff : PCI Bus #01 e8000000-ebffffff : Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge ede00000-efefffff : PCI Bus #01 ee000000-eeffffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X efeff000-efefffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X effc0000-effdffff : Aureal Semiconductor Vortex 1
5.5. PCI information
bifrost:/var/log# lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x200:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ede00000-efefffff
Prefetchable memory behind bridge: e5c00000-e5cfffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at de00 [size=32]00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: D-Link System Inc DE-528
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=32]
00:10.0 Multimedia audio controller: Aureal Semiconductor Vortex 1 (rev
02)
Subsystem: Aztech System Ltd: Unknown device 1002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 3000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at effc0000 (32-bit, non-prefetchable)
[size=128K]
Region 1: I/O ports at da00 [size=8]
Region 2: I/O ports at d800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0084
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Region 0: Memory at ee000000 (32-bit, non-prefetchable)[size=16M]
Region 1: I/O ports at bc00 [size=256]
Region 2: Memory at efeff000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at efec0000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
5.6. SCSI information (I only have scsi emulation for ide-cdwriting)
bifrost:/var/log# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TOSHIBA Model: DVD-ROM SD-M1202 Rev: 1018 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g Type: CD-ROM ANSI SCSI revision: 02
greetings,
Stijn.
P.S. I'm not experienced in reporting bugs (this was my first one), so I hope I did it right :-)
Signature · 3 lines
Stijn Opheide mail: [email protected] -- [email protected] web: http://bifrost.kotnet.org -- http://cernunos.studentenweb.org
Quoted 2 lines
I'm using sounddrivers from www.opensound.com, but I tried to load the joystick modules before loading soundmodules.
Not according to the oops
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
EIP;
d884312a<[sndshield]udi_interruptible_sleep_on_timeout+1e/30> <=====
So you have opensound stuff loaded
Quoted 6 lines
Trace;
d88412fc<[gameport]gameport_open+14/40>Code;
d884312a<[sndshield]udi_interruptible_sleep_on_timeout+1e/30> 00000000 <_EIP>:
Code;d884312a<[sndshield]udi_interruptible_sleep_on_timeout+1e/30> <=====
and indeed it blew up in their code