NeoMagic Framebuffer Driver
Subsystems (2)
PATCH 1/1 NeoMagic Framebuffer Driver
Hi,
attached is a new version of neofb for Linux 2.4 that supports all PCI based NeoMagic chipsets. It has been ported from the XFree Driver. Features include console acceleration and LCD panel size detection. Basic features like mode switching, virtual resolutions, mtrr and mmio are also implemented.
I've seen this driver working on many notebooks now and would like the driver to be included into the kernel distribution.
Thanks.
Signature · 9 lines
Best regards,
Denis Oliver Kropp
.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/ |
"------------------------------------------"
convergence integrated media GmbHQuoted 9 lines · Denis Oliver Kropp
Hi,
attached is a new version of neofb for Linux 2.4 that supports all PCI based NeoMagic chipsets. It has been ported from the XFree Driver. Features include console acceleration and LCD panel size detection. Basic features like mode switching, virtual resolutions, mtrr and mmio are also implemented.
Quoted 5 lines
I've seen this driver working on many notebooks now and would like the driver to be included into the kernel distribution.
Thanks.
Hi,
this version has a MODULE_LICENSE, applies fine to linux-2.4.18-pre6.
Signature · 9 lines
Best regards,
Denis Oliver Kropp
.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/ |
"------------------------------------------"
convergence integrated media GmbHDocumentation/Configure.help +10 -0
@@ -4145,6 +4145,16 @@ This driver supports the L7200 Color LCD. Say Y if you want graphics support. +NeoMagic display support (EXPERIMENTAL) +CONFIG_FB_NEOMAGIC + This driver supports notebooks with NeoMagic PCI chips. + Say Y if you have such a graphics card. + + The driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called neofb.o. If you want to compile it as a + module, say M here and read Documentation/modules.txt. + PowerMac "control" frame buffer device support CONFIG_FB_CONTROL This driver supports a frame buffer for the graphics adapter in the
drivers/video/Config.in +9 -6
@@ -143,6 +143,7 @@ bool ' SIS 630/540/730 support' CONFIG_FB_SIS_300 bool ' SIS 315H/315 support' CONFIG_FB_SIS_315 fi + tristate ' NeoMagic display support (EXPERIMENTAL)' CONFIG_FB_NEOMAGIC tristate ' 3Dfx Banshee/Voodoo3 display support (EXPERIMENTAL)' CONFIG_FB_3DFX tristate ' 3Dfx Voodoo Graphics (sst1) support (EXPERIMENTAL)' CONFIG_FB_VOODOO1 fi
@@ -268,7 +269,7 @@ "$CONFIG_FB_SA1100" = "y" -o "$CONFIG_FB_3DFX" = "y" -o \ "$CONFIG_FB_PMAG_BA" = "y" -o "$CONFIG_FB_PMAGB_B" = "y" -o \ "$CONFIG_FB_MAXINE" = "y" -o "$CONFIG_FB_TX3912" = "y" -o \ - "$CONFIG_FB_SIS" = "y" ]; then + "$CONFIG_FB_SIS" = "y" -o "$CONFIG_FB_NEOMAGIC" = "y" ]; then define_tristate CONFIG_FBCON_CFB8 y else if [ "$CONFIG_FB_ACORN" = "m" -o "$CONFIG_FB_ATARI" = "m" -o \
@@ -288,7 +289,7 @@ "$CONFIG_FB_PMAG_BA" = "m" -o "$CONFIG_FB_PMAGB_B" = "m" -o \ "$CONFIG_FB_MAXINE" = "m" -o "$CONFIG_FB_RADEON" = "m" -o \ "$CONFIG_FB_SA1100" = "m" -o "$CONFIG_FB_SIS" = "m" -o \ - "$CONFIG_FB_TX3912" = "m" ]; then + "$CONFIG_FB_TX3912" = "m" -o "$CONFIG_FB_NEOMAGIC" = "m" ]; then define_tristate CONFIG_FBCON_CFB8 m fi fi
@@ -304,7 +305,8 @@ "$CONFIG_FB_RIVA" = "y" -o "$CONFIG_FB_ATY128" = "y" -o \ "$CONFIG_FB_CYBER2000" = "y" -o "$CONFIG_FB_3DFX" = "y" -o \ "$CONFIG_FB_SIS" = "y" -o "$CONFIG_FB_SA1100" = "y" -o \ - "$CONFIG_FB_PVR2" = "y" -o "$CONFIG_FB_VOODOO1" = "y" ]; then + "$CONFIG_FB_PVR2" = "y" -o "$CONFIG_FB_VOODOO1" = "y" -o \ + "$CONFIG_FB_NEOMAGIC" = "y" ]; then define_tristate CONFIG_FBCON_CFB16 y else if [ "$CONFIG_FB_ATARI" = "m" -o "$CONFIG_FB_ATY" = "m" -o \
@@ -319,7 +321,8 @@ "$CONFIG_FB_RIVA" = "m" -o "$CONFIG_FB_ATY128" = "m" -o \ "$CONFIG_FB_CYBER2000" = "m" -o "$CONFIG_FB_SIS" = "m" -o \ "$CONFIG_FB_SA1100" = "m" -o "$CONFIG_FB_RADEON" = "m" -o \ - "$CONFIG_FB_PVR2" = "m" -o "$CONFIG_FB_VOODOO1" = "m" ]; then + "$CONFIG_FB_PVR2" = "m" -o "$CONFIG_FB_VOODOO1" = "m" -o \ + "$CONFIG_FB_NEOMAGIC" = "m" ]; then define_tristate CONFIG_FBCON_CFB16 m fi fi
@@ -328,7 +331,7 @@ "$CONFIG_FB_MATROX" = "y" -o "$CONFIG_FB_PM2" = "y" -o \ "$CONFIG_FB_ATY128" = "y" -o "$CONFIG_FB_RADEON" = "y" -o \ "$CONFIG_FB_CYBER2000" = "y" -o "$CONFIG_FB_PVR2" = "y" -o \ - "$CONFIG_FB_VOODOO1" = "y" ]; then + "$CONFIG_FB_VOODOO1" = "y" -o "$CONFIG_FB_NEOMAGIC" = "y" ]; then define_tristate CONFIG_FBCON_CFB24 y else if [ "$CONFIG_FB_ATY" = "m" -o "$CONFIG_FB_VIRTUAL" = "m" -o \
@@ -336,7 +339,7 @@ "$CONFIG_FB_MATROX" = "m" -o "$CONFIG_FB_PM2" = "m" -o \ "$CONFIG_FB_ATY128" = "m" -o "$CONFIG_FB_RADEON" = "m" -o \ "$CONFIG_FB_CYBER2000" = "m" -o "$CONFIG_FB_PVR2" = "m" -o \ - "$CONFIG_FB_VOODOO1" = "m" ]; then + "$CONFIG_FB_VOODOO1" = "m" -o "$CONFIG_FB_NEOMAGIC" = "y" ]; then define_tristate CONFIG_FBCON_CFB24 m fi fi
drivers/video/Makefile +1 -0
@@ -49,6 +49,7 @@ obj-$(CONFIG_FB_ATARI) += atafb.o obj-$(CONFIG_FB_ATY128) += aty128fb.o obj-$(CONFIG_FB_RADEON) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o obj-$(CONFIG_FB_IGA) += igafb.o obj-$(CONFIG_FB_CONTROL) += controlfb.o obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
drivers/video/fbmem.c +5 -0
@@ -72,6 +72,8 @@extern int atyfb_setup (char *);extern int aty128fb_init (void );extern int aty128fb_setup (char *); +extern int neofb_init (void ); +extern int neofb_setup (char *);extern int igafb_init (void );extern int igafb_setup (char *);extern int imsttfb_init (void );
@@ -171,6 +173,9 @@#endif #ifdef CONFIG_FB_ATY128 { "aty128fb", aty128fb_init, aty128fb_setup }, +#endif +#ifdef CONFIG_FB_NEOMAGIC + { "neo", neofb_init, neofb_setup }, #endif #ifdef CONFIG_FB_VIRGE { "virge", virgefb_init, virgefb_setup },
drivers/video/neofb.c +2421 -0
2,421 lines not on this page · raw message
drivers/video/neofb.h +294 -0
294 lines not on this page · raw message
include/linux/fb.h +12 -0
@@ -94,6 +94,18 @@#define FB_ACCEL_IGS_CYBER5000 35/* CyberPro 5000 */ #define FB_ACCEL_SIS_GLAMOUR 36/* SiS 300/630/540 */ + +#define FB_ACCEL_NEOMAGIC_NM2070 90/* NeoMagic NM2070 */ +#define FB_ACCEL_NEOMAGIC_NM2090 91/* NeoMagic NM2090 */ +#define FB_ACCEL_NEOMAGIC_NM2093 92/* NeoMagic NM2093 */ +#define FB_ACCEL_NEOMAGIC_NM2097 93/* NeoMagic NM2097 */ +#define FB_ACCEL_NEOMAGIC_NM2160 94/* NeoMagic NM2160 */ +#define FB_ACCEL_NEOMAGIC_NM2200 95/* NeoMagic NM2200 */ +#define FB_ACCEL_NEOMAGIC_NM2230 96/* NeoMagic NM2230 */ +#define FB_ACCEL_NEOMAGIC_NM2360 97/* NeoMagic NM2360 */ +#define FB_ACCEL_NEOMAGIC_NM2380 98/* NeoMagic NM2380 */ + +struct fb_fix_screeninfo {char id[16 ];/* identification string eg "TT Builtin" */ unsigned long smem_start;/* Start of frame buffer mem */
Quoted 1 line · Denis Oliver Kropp
this version has a
MODULE_LICENSE, applies fine to linux-2.4.18-pre6.
This seems to react rather badly when loaded from within X; I managed to lock the machine trying to switch VCs after doing so (for example, when I tried with matroxfb, it only screwed up the display.)
Yes, I know this falls into the 'don't *DO* that' category. :)
Bill
Quoted 6 lines · Bill Nottingham
Quoted 1 line · Denis Oliver Kropp
this version has a
MODULE_LICENSE, applies fine to linux-2.4.18-pre6.This seems to react rather badly when loaded from within X; I managed to lock the machine trying to switch VCs after doing so (for example, when I tried with matroxfb, it only screwed up the display.)
The Matrox graphics cards are quite resistant when being programmed by two drivers simultaneously.
Quoted 1 line
Yes, I know this falls into the 'don't *DO* that' category. :)
Definitely ;)
Signature · 9 lines
Best regards,
Denis Oliver Kropp
.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/ |
"------------------------------------------"
convergence integrated media GmbHQuoted 10 lines · Denis Oliver Kropp
Quoted 6 lines · Bill Nottingham
Quoted 1 line · Denis Oliver Kropp
this version has a
MODULE_LICENSE, applies fine to linux-2.4.18-pre6.This seems to react rather badly when loaded from within X; I managed to lock the machine trying to switch VCs after doing so (for example, when I tried with matroxfb, it only screwed up the display.)
The Matrox graphics cards are quite resistant when being programmed by two drivers simultaneously.
I'm quite happy since the latest 2.4.1* and X 4.1.0, switching between console framebuffers and X with my MGA G450, it didn't result in a color screw anymore, although it worked somehow before...
Quoted 3 lines
Quoted 1 line
Yes, I know this falls into the 'don't *DO* that' category. :)
Definitely ;)
No, but if you did, your eyes bled category :)
A small glitch remains: 1 of 4 X(dm) (re)starts the screen is 3 cm discentered. Switching back and forth fixes it always.
Cheers,
Hans-Peter