Fix floppy io ports reservation
PATCH 1/1 Fix floppy io ports reservation
Hi,
Below is a patch that fixes the io ports reservation of the floppy driver as the one in the driver is actually incorrect and this clashes with the (correct) reservation by the PNPBIOS driver.
I asked a friend to check and on his Windows 2000 system the port reservation was 0x3f2-0x3f5 + 0x3f7, i.e. it just excludes ports 0x3f0-0x3f1, which are NOT used anywhere in the driver anyway.
This patch works for me on ia32 (Pentium 4), however I am not 100% sure it will work on all architectures. From a quick look I would say it will work but I may have missed something...
Before I get flamed for this patch being a hack, yes it is a bit of a hack, but the full solution involving changing of the actual base address and all the offsets to the base is a huge patch and involves changing quite a bit of architecture specific code in non-obvious ways. (Most non-obvious are the changes to Sparc, Sparc64, mips, mips64 and m68k, the rest of the arch are a piece of cake.)
I would suggest that people give this patch a go, especially on non-ia32 arch and let us all know if it doesn't work. Perhaps best would be to include it in the next -pre kernels and see if anyone screams. (-:
Almost forgot, patch is against 2.4.18-pre7-ac2 but I would think it will apply to any 2.4 and probably 2.5 kernel.
Best regards,
Anton
Signature · 77 lines
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Linux NTFS maintainer / WWW: http://linux-ntfs.sf.net/
ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/
---floppy.diff---
--- l/drivers/block/floppy.c Thu Jan 31 18:16:20 2002
+++ linux-2.4.18-pre7-ac2-vanilla/drivers/block/floppy.c Thu Feb 7 02:35:07 2002
@@ -129,6 +129,12 @@
* floppy controller (lingering task on list after module is gone... boom.)
*/
+/*
+ * 2002/02/07 -- Anton Altaparmakov - Fix io ports reservation to correct range
+ * (0x3f2-0x3f5, 0x3f7). This fix is a bit of a hack but the proper fix
+ * requires many non-obvious changes in arch dependent code.
+ */
+
#define FLOPPY_SANITY_CHECK
#undef FLOPPY_SILENT_DCL_CLEAR
@@ -4229,7 +4235,7 @@
FDCS->rawcmd = 2;
if (user_reset_fdc(-1,FD_RESET_ALWAYS,0)){
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address, 6);
+ release_region(FDCS->address+2, 4);
release_region(FDCS->address+7, 1);
FDCS->address = -1;
FDCS->version = FDC_NONE;
@@ -4239,7 +4245,7 @@
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE){
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address, 6);
+ release_region(FDCS->address+2, 4);
release_region(FDCS->address+7, 1);
FDCS->address = -1;
continue;
@@ -4318,11 +4324,11 @@
for (fdc=0; fdc< N_FDC; fdc++){
if (FDCS->address != -1){
- if (!request_region(FDCS->address, 6, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address);
+ if (!request_region(FDCS->address+2, 4, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + 2);
goto cleanup1;
}
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
+ if (!request_region(FDCS->address+7, 1, "floppy DIR")) {
DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + 7);
goto cleanup2;
}
@@ -4350,12 +4356,12 @@
irqdma_allocated = 1;
return 0;
cleanup2:
- release_region(FDCS->address, 6);
+ release_region(FDCS->address + 2, 4);
cleanup1:
fd_free_irq();
fd_free_dma();
while(--fdc >= 0) {
- release_region(FDCS->address, 6);
+ release_region(FDCS->address + 2, 4);
release_region(FDCS->address + 7, 1);
}
MOD_DEC_USE_COUNT;
@@ -4422,7 +4428,7 @@
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
if (FDCS->address != -1) {
- release_region(FDCS->address, 6);
+ release_region(FDCS->address+2, 4);
release_region(FDCS->address+7, 1);
}
fdc = old_fdc;Quoted 7 lines · Anton Altaparmakov
Below is a patch that fixes the io ports reservation of the floppy driver as the one in the driver is actually incorrect and this clashes with the (correct) reservation by the PNPBIOS driver.
I asked a friend to check and on his Windows 2000 system the port reservation was 0x3f2-0x3f5 +
0x3f7, i.e. it just excludes ports 0x3f0-0x3f1, which are NOT used anywhere in the driver anyway.
ports 0x3f0 and 0x3f1 are used on certain PS/2 systems and on some very old AT clones
Quoted 6 lines
Quoted 3 lines
I asked a friend to check and on his Windows 2000 system the port reservation was 0x3f2-0x3f5 +
0x3f7, i.e. it just excludes ports 0x3f0-0x3f1, which are NOT used anywhere in the driver anyway.ports
0x3f0and0x3f1are used on certain PS/2 systems and on some very old AT clones
The driver must only reserve those ports on machines which needed them and when it needs them (which it never actually does). The ports are used for other superio related things on newer machines
Quoted 10 lines · Alan Cox
Quoted 6 lines
Quoted 3 lines
I asked a friend to check and on his Windows 2000 system the port reservation was 0x3f2-0x3f5 +
0x3f7, i.e. it just excludes ports 0x3f0-0x3f1, which are NOT used anywhere in the driver anyway.ports
0x3f0and0x3f1are used on certain PS/2 systems and on some very old AT clonesThe driver must only reserve those ports on machines which needed them and when it needs them (which it never actually does). The ports are used for other superio related things on newer machines
Indeed, I couldn't find any code making use of the 0x3f0 and 0x3f1 ports, hence why I put forward my patch... If someone would like to prove me wrong here, please do so. (-:
Best regards,
Anton
Signature · 5 lines
"I've not lost my mind. It's backed up on tape somewhere." - Unknown -- Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @) Linux NTFS Maintainer / WWW: http://linux-ntfs.sf.net/ ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/
Quoted 10 lines · Guest section DW
Quoted 7 lines · Anton Altaparmakov
Below is a patch that fixes the io ports reservation of the floppy driver as the one in the driver is actually incorrect and this clashes with the (correct) reservation by the PNPBIOS driver.
I asked a friend to check and on his Windows 2000 system the port reservation was 0x3f2-0x3f5 +
0x3f7, i.e. it just excludes ports 0x3f0-0x3f1, which are NOT used anywhere in the driver anyway.ports
0x3f0and0x3f1are used on certain PS/2 systems
Can you point me to the code for the PS/2 systems in question? I fail to see instances where anything less than 0x3f2 is used. Assuming such code is present and I have just missed it, perhaps we can find a way to detect such cases and only then register the ports.
Quoted 1 line
and on some very old AT clones
And we care because? AT = 80286 CPU in the definition I am aware of, which Linux doesn't support and catering for unsupported hardware seems silly. (-; But perhaps you meant something else by "AT clones"?
btw. Today I got a chance to check Windows XP Pro and that like Win2k only uses ports 0x3f2-0x3f5 and 0x3f7. As I have never heard of anyone complaining their floppy doesn't work with Windows (except for that Tyan BIOS bug a few years ago that is...), it would appear it is quite safe to do the same in the linux floppy driver...
FYI: Just skimmed through the WinXP floppy source (what a windows driver is not closed source? YES, it is in the DDK, they obviously don't think it worth hiding...(-:). Anyway, they never use 0x3f0-0x3f1 either AFAICS and in fact there is an interesting comment in the source:
---quote from pdc.c---
The PC97(98) hardware specification defines only 3f2, 3f4, and 3f5 as io port resources for standard floppy controllers (based on IBM PC floppy controller configurations). In addition to these resources, fdc.sys requires 3f7 for disk change detection and data rate programming and optionally 3f3 for floppy tape support. In addition, some bioses define aliased resources (e.g. 3f2 & 7f2, etc.)
---end of quote---
Best regards,
Anton
Signature · 5 lines
"I've not lost my mind. It's backed up on tape somewhere." - Unknown -- Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @) Linux NTFS Maintainer / WWW: http://linux-ntfs.sf.net/ ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/
Quoted 5 lines
Quoted 2 lines
ports
0x3f0and0x3f1are used on certain PS/2 systems and on some very old AT clones[PS/2] Can you point me to the code for the PS/2 systems in question? [AT] And we care because?
You need not worry - these systems have been dead for over fifteen years.
On a sunny Fri, 8 Feb 2002 16:23:48 +0100 Guest section DW gathered a sheaf of electrons and etched in their motions the following immortal words:
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
ports
0x3f0and0x3f1are used on certain PS/2 systems and on some very old AT clones[PS/2] Can you point me to the code for the PS/2 systems in question? [AT] And we care because?
You need not worry - these systems have been dead for over fifteen years.
I dont like that attitude. I have a system that has been 'dead' for a while (its now 15 years old), and I'm 're'-porting linux to it (Acorn A400).
Linux is meant to be fun, not just 'latest X86 crap'.
Not to say that we should restrict anything for old hardware, but it doesnt hurt to spare a thought for it. Doing so may even encourage people to write better code.