Mouse under 2.5.3-dj3
To follow up on my previous postings of a long while ago.
I have a very boring trackpad mouse on a Sony VAIO R505JE laptop. At least, 2.4.18-pre7 thinks it's normal PS/2 and uninteresting. 2.5.3-dj* on the other hand, seems to be horribly confused. I rebuilt it with everything mouse related as modules just so I didn't have to reboot when it misdetected my mouse.
First, I modprobe mousedev, then psmouse.
Mousedev always is cool and loads without a problem, printing out its "PS/2 mouse device common for all mice" message.
~90% of the time, psmouse does not detect a mouse. Doesn't work, obviously.
~5% of the time, psmouse reports I have a "PS/2 Generic Mouse on isa0060/serio1".
At such times, the mouse works, but a complete cross on the trackpad
is ~100 pixels at best.
~1% of the time, psmouse blurts "Failed to enable mouse on isa0060/serio1" Here the mouse does not work. ~4% of the time, psmouse prints "PS/2 Logitech Mouse on isa0060/serio1" This is the correct mode of behavior.
As it is I run "modprobe mousedev; while < /dev/zero; do modprobe psmouse; echo -n "a"; sleep 1; done" and wait for the Logitech message to give the loop a Ctrl-C. There has to be a better way, and more information I can provide.
FYI, keyboard glitches *seem* to have disappeared.
--Nathan
Quoted 22 lines · Nathan
To follow up on my previous postings of a long while ago.
I have a very boring trackpad mouse on a Sony VAIO R505JE laptop. At least, 2.4.18-pre7 thinks it's normal PS/2 and uninteresting. 2.5.3-dj* on the other hand, seems to be horribly confused. I rebuilt it with everything mouse related as modules just so I didn't have to reboot when it misdetected my mouse.
First, I modprobe mousedev, then psmouse.
Mousedev always is cool and loads without a problem, printing out its "PS/2 mouse device common for all mice" message.~90% of the time, psmouse does not detect a mouse. Doesn't work, obviously. ~5% of the time, psmouse reports I have a "PS/2 Generic Mouse on isa0060/serio1".
At such times, the mouse works, but a complete cross on the trackpad
is ~100 pixels at best.
~1% of the time, psmouse blurts "Failed to enable mouse on isa0060/serio1" Here the mouse does not work.
~4% of the time, psmouse prints "PS/2 Logitech Mouse on isa0060/serio1"
This is the correct mode of behavior.
Quoted 6 lines
As it is I run "modprobe mousedev; while <
/dev/zero; do modprobe psmouse; echo -n "a"; sleep 1; done" and wait for the Logitech message to give the loop a Ctrl-C. There has to be a better way, and more information I can provide.FYI, keyboard glitches *seem* to have disappeared.
Can you enable I8042_DEBUG_IO in drivers/input/serio/i8042.h and send me the 'dmesg' logs for the four cases? It might be the touchpad is responding just on the limit of what the psmouse driver thinks is the slowest possible speed.
Signature · 2 lines
Vojtech Pavlik SuSE Labs