3com pcmcia modules.
Apologies if this has been brought up before,
but whatever happened to the 3c575 (3com pcmcia) card driver/module in 2.5.x branch? (it was in 2.2.19 for sure).
TIA,
Signature · 1 line
Paul Edwards
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"paule" == paule <[email protected]> writes:
paule> Apologies if this has been brought up before, but whatever paule> happened to the 3c575 (3com pcmcia) card driver/module in paule> 2.5.x branch? (it was in 2.2.19 for sure).
In the case of my laptop's Boomerang card, it's now 3c59x; which supports all of the 3Com CardBus adaptors.
More info on Don Becker's site: http://www.scyld.com/network/vortex.html
- Chris.
Signature · 2 lines
$a="printf.net"; Chris Ball | chris@void.$a | www.$a | finger: chris@$a
"In the beginning there was nothing, which exploded."Quoted 11 lines · Chris Ball
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"paule" == paule <[email protected]> writes:
paule> Apologies if this has been brought up before, but whatever paule> happened to the 3c575 (3com pcmcia) card driver/module in paule> 2.5.x branch? (it was in 2.2.19 for sure).
In the case of my laptop's Boomerang card, it's now 3c59x; which supports all of the 3Com CardBus adaptors.
More info on Don Becker's site: http://www.scyld.com/network/vortex.html
Thanks for the help,
problem (under 2.5.3) however,
root@paule:/lib/modules/2.5.3/kernel/drivers/net# insmod 3c59x Using /lib/modules/2.5.3/kernel/drivers/net/3c59x.o /lib/modules/2.5.3/kernel/drivers/net/3c59x.o: unresolved symbol del_timer_sync
Which would probably be why it isnt loaded at boot time either :(
Any help would be appreciated.
Signature · 1 line
Paul Edwards
Quoted 5 lines · [email protected] wrote:
root@paule:/lib/modules/2.5.3/kernel/drivers/net# insmod 3c59x Using /lib/modules/2.5.3/kernel/drivers/net/3c59x.o /lib/modules/2.5.3/kernel/drivers/net/3c59x.o: unresolved symbol del_timer_sync
That can't happen :)
I have checked 2.5.4-pre5 SMP and UP, and the module loads OK. Possibly 2.5.3 was broken, but it's unlikely. Please try a `make clean'.
-
Quoted 9 lines · Andrew Morton
Quoted 5 lines · [email protected] wrote:
root@paule:/lib/modules/2.5.3/kernel/drivers/net# insmod 3c59x Using /lib/modules/2.5.3/kernel/drivers/net/3c59x.o /lib/modules/2.5.3/kernel/drivers/net/3c59x.o: unresolved symbol del_timer_syncThat can't happen :)
reconfigured kernel, re-made, and reconfigured rc.inet1 (under slackware8.0) to support multiple interfaces,
and now it's all happy! *yay* :)
(yes im being sick, and using a screen-less laptop to route
two internal networks, but hey, it's less than 1u, and cheaper than a router :)
Thanks for the help,
Signature · 1 line
Paul Edwards
Quoted 3 lines · [email protected] wrote:
Apologies if this has been brought up before,
but whatever happened to the 3c575 (3com pcmcia) card driver/module in 2.5.x branch? (it was in 2.2.19 for sure).
It's not needed. "3c59x" provided full support for PCI and CardBus.
Signature · 3 lines
Jeff Garzik | "I went through my candy like hot oatmeal Building 1024 | through an internally-buttered weasel." MandrakeSoft | - goats.com
Quoted 11 lines · On Sat, Feb 09, 2002 at 10:08:05PM +0000, [email protected] wrote:
Quoted 9 lines · Andrew Morton
Quoted 5 lines · [email protected] wrote:
root@paule:/lib/modules/2.5.3/kernel/drivers/net# insmod 3c59x Using /lib/modules/2.5.3/kernel/drivers/net/3c59x.o /lib/modules/2.5.3/kernel/drivers/net/3c59x.o: unresolved symbol del_timer_syncThat can't happen :)
Quoted 7 lines
reconfigured kernel, re-made, and reconfigured rc.inet1 (under slackware8.0) to support multiple interfaces,
and now it's all happy! *yay* :)
(yes im being sick, and using a screen-less laptop to route
two internal networks, but hey, it's less than 1u, and cheaper than a router :)
An old problem has re-appeared since I have done this, On a soft-reboot ('reboot / shutdown -r now') the kernel stops on its way back up stating
Socket Status 0x0000003
(or something similar)
and it then requires a hard-reset to clear.
This only seems to be under the 3c59x code / more-so the vortex module.
Any help would be appreciated.
Cheers,
Quoted 9 lines · [email protected] wrote:
An old problem has re-appeared since I have done this, On a soft-reboot ('reboot / shutdown -r now') the kernel stops on its way back up stating
Socket Status0x0000003(or something similar)
and it then requires a hard-reset to clear.
This only seems to be under the 3c59x code / more-so the vortex module.
IRQ storm on the Cardbus controller, probably.
Try the pcmcia-ip-autoconf and yenta-hack patches at
http://www.zip.com.au/~akpm/linux/2.4/2.4.18-pre9/
-