scsi abort 0x2002 and eth0: too much work on a dual amd 760mpx system
A message that is not in the archive (sent off-list or not yet received): [email protected]
rik-
i have done extensive cpu load + i/o testing on the 760mp machine. it handles perfectly under very high cpu activity. one thing i should mention though is that neither of these chipsets, amd 760mp and amd760mpx, work with multi- processor specification 1.4 under linux. i had several problems using m.p.s. 1.4 on the 760mp in dual processor mode and the 760mpx wouldn't even boot with m.p.s. 1.4 enabled.
as an fyi to anyone listening, the 760mpx crashed while loading any smp linux kernel during apic timer calibration.
so my suggestion rik, if you haven't done this already, is to change the multi- processor specification in your bios from 1.4 to 1.1.
-kelley
Quoted 23 lines · Rik Faith
I'm seeing possibly related problems with a 760MP board (Tyan Tiger MP) and 3ware adapters. I can very reproduce the problem if I run two instances of burnK7 (from cpuburn: http://users.ev1.net/~redelm/) and then do an I/O operation. Due to what I think is a bug in the 3ware code, however, my machine locks hard during the SCSI reset. Could you try burnK7 (the idea is to load the CPUs -- not to heat them up) and see if your problem gets worse?
I was hoping to "fix" my problem by getting a AMD-760MPX MB from Asus, but I'm no longer sure that's a good idea. I'm currently running Linux with maxcpus=1 on the boot prompt -- the system seems very stable when only one CPU is being used -- have you tried that?
The general problem may be that an interrupt gets lost, but I'd like to get more evidence that leads to that conclusion. Thanks, Rik.
BTW, I use:
while :; do date; strace fdisk -l/dev/sda; uptime; echo; sleep 5; doneand then look for a stall at "read(4," when I start the second burnK7. If I kill both burnK7's quick enough, the 3ware card will recover -- otherwise, the machine locks.
Quoted 1 line
Quoted 1 line
kelley j eicher
<< UNIX architect
Quoted 1 line
Quoted 1 line
Univ. of MN Astronomy Dept.
<< ph: (612) 626-2067 or (612) 624-3589
Quoted 1 line
Quoted 1 line
fx: (612) 626-2029
<< office: 385 physics
Quoted 1 line
Quoted 1 line
carde at astro dot umn dot edu