Skip to contentSkip to conversation

Kernel 2.2.20 RAM requirements

DISCUSSION Christoph Pittracher 4 participants 6 messages Feb 13, 2002 – Feb 14, 2002

lore
Share & tools
lore
#0 lore raw

Hi!
I wanted to boot kernel version 2.2.20 on my old Pentium 75Mhz system with 16MB RAM. After "uncompressing linux" i get a: "Out Of Memory -- System halted".
Kernel version 2.2.19 works without problems (same kernel configuration). I didn't tried 2.4 kernels yet, but I wonder that 2.2.20 needs so much memory?

best regards,
Christoph

#1 lore raw
Quoted 6 lines

I wanted to boot kernel version 2.2.20 on my old Pentium 75Mhz system with 16MB RAM. After "uncompressing linux" i get a: "Out Of Memory -- System halted".
Kernel version 2.2.19 works without problems (same kernel configuration). I didn't tried 2.4 kernels yet, but I wonder that 2.2.20 needs so much memory?

It doesn't. What boot loader are you using ?

#2 lore raw
Quoted 7 lines · Alan Cox
Quoted 6 lines

I wanted to boot kernel version 2.2.20 on my old Pentium 75Mhz system with 16MB RAM. After "uncompressing linux" i get a: "Out Of Memory -- System halted".
Kernel version 2.2.19 works without problems (same kernel configuration). I didn't tried 2.4 kernels yet, but I wonder that 2.2.20 needs so much memory?

It doesn't. What boot loader are you using ?

LILO version 21.5-1 beta
from Debian 2.2r5.

best regards,
Christoph

#3 lore raw
In reply to Alan Cox
Quoted 11 lines · Christoph Pittracher
Quoted 7 lines · Alan Cox
Quoted 6 lines

I wanted to boot kernel version 2.2.20 on my old Pentium 75Mhz system with 16MB RAM. After "uncompressing linux" i get a: "Out Of Memory -- System halted".
Kernel version 2.2.19 works without problems (same kernel configuration). I didn't tried 2.4 kernels yet, but I wonder that 2.2.20 needs so much memory?

It doesn't. What boot loader are you using ?

LILO version 21.5-1 beta
from Debian 2.2r5.

If you are using zImage, try bzImage. zImage gives 'Out of memory -- System halted' from version 2.2.20pre5 up to 2.2.20. In 2.2.21pre1 and pre2 it works ok again.

#4 lore raw
In reply to Alan Cox

I'll take a stab at this one - bet you are using zImage, and once you try bzImage it will work. Saw this just recently on a low mem machine (LILO/loadlin) & haven't had a chance to investigate further.

Please also report gcc/binutils etc. used.

Paul.

Quoted 12 lines · Christoph Pittracher
Quoted 7 lines · Alan Cox
Quoted 6 lines

I wanted to boot kernel version 2.2.20 on my old Pentium 75Mhz system with 16MB RAM. After "uncompressing linux" i get a: "Out Of Memory -- System halted".
Kernel version 2.2.19 works without problems (same kernel configuration). I didn't tried 2.4 kernels yet, but I wonder that 2.2.20 needs so much memory?

It doesn't. What boot loader are you using ?

LILO version 21.5-1 beta
from Debian 2.2r5.

#5 lore raw
Quoted 3 lines

you try bzImage it will work. Saw this just recently on a low mem machine (LILO/loadlin) & haven't had a chance to investigate further.

The zImage/bzImage one should be fixed in 2.2.21pre