Skip to contentSkip to conversation

Oops in _every_ 2.5 kernel - SCSI changes

DISCUSSION Paulo Andre' 2 participants 3 messages Feb 20, 2002

lore
Share & tools
lore
#0 lore raw

Hi Jens,

This is a very keen and motivated kernel hacker newbie here. That said, bear with me :)

I've been fighting with the 2.5 branch for sometime now in order to successfully boot it on a SCSI machine. I have no problems whatsoever with known 'good' 2.4 releases. So, in trying to do my homework I compiled 2.5.0 (or rather 2.5.1-pre1, since 2.5.0 is -greased-turkey) successfully but it chokes right in 2.5.1-pre2 (and any later kernel for that matter). I assume this has something to do with Jens' changes, at least regarding the Changelog..

pre2:
- Greg KH: USB update
- Richard Gooch: refcounting for devfs
- Jens Axboe: start of new block IO layer

I'm rulling out USB stuff since it doesn't have any USB devices whatsoever (therefore no support compiled) and also I don't think it is devfs problem. I've fed the oops file to ksymoops and here's what it spits (btw, this was a cross-compile, which explains why ksymoops runs on a 2.4.17 kernel. I've used the correct vmlinux and System.map though and no modules):

ksymoops 2.4.3 on i686 2.4.17-prla2. Options used
-v vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.17-prla2/ (default)
-m System.map (specified) Error (regular_file): read_ksyms stat
/proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod

Unable to handle kernel NULL pointer dereference at virtual address 
00000040
c019a1e3
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c019a1e3>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: c1f4d000 ecx: c1f8a260 edx: 00000000
esi: c1f4d018 edi: c1f4d134 ebp: c1f8a260 esp: c1091e3c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c1091000)

Stack: c1091fbc c1091fbc c019a51e c1f4d000 c1091fbc c1091fbc c1091fd0 
c1f8a260
        c1091e78 ffffffff c02234c0 c1091e78 00000000 00000000 c1f4d000 
00000216
        00000001 00000019 00000000 00000000 c00b9f40 c017a7cb c1081000 
00000000
Call Trace: [<c019a51e>] [<c017a7cb>] [<c01cc4e7>] [<c017b306>] 
[<c017f0bc>]
    [<c017e6a2>] [<c01126e6>] [<c011274b>] [<c0112821>] [<c0112a43>] 
[<c0112994>]
    [<c0195977>] [<c0105023>] [<c0107004>]
Code: 8b 50 40 8b 40 3c eb 12 90 8d 74 26 00 f6 41 7a 02 74 07 

b8 >>EIP; c019a1e2 <scsi_initialize_merge_fn+2a/58> <=====
Trace; c019a51e <scan_scsis+c6/444>
Trace; c017a7ca <scrup+6a/104>
Trace; c01cc4e6 <vgacon_cursor+17e/188>
Trace; c017b306 <set_cursor+6e/88>
Trace; c017f0bc <poke_blanked_console+60/64>
Trace; c017e6a2 <vt_console_print+2d2/2e4>
Trace; c01126e6 <__call_console_drivers+3a/4c>
Trace; c011274a <_call_console_drivers+52/58>
Trace; c0112820 <call_console_drivers+d0/d8>
Trace; c0112a42 <release_console_sem+72/78>
Trace; c0112994 <printk+104/110>
Trace; c0195976 <scsi_register_host+1ba/2b0>
Trace; c0105022 <init+6/114>
Trace; c0107004 <kernel_thread+28/38>
Code; c019a1e2 <scsi_initialize_merge_fn+2a/58>
00000000 <_EIP>:
Code; c019a1e2 <scsi_initialize_merge_fn+2a/58> <=====

    0:   8b 50 40                  mov    0x40(%eax),%edx   <=====
Code;  c019a1e4 <scsi_initialize_merge_fn+2c/58>
    3:   8b 40 3c                  mov    0x3c(%eax),%eax
Code;  c019a1e8 <scsi_initialize_merge_fn+30/58>
    6:   eb 12                     jmp    1a <_EIP+0x1a> c019a1fc 

<scsi_initialize_merge_fn+44/58>
Code; c019a1ea <scsi_initialize_merge_fn+32/58>
8: 90 nop Code; c019a1ea
<scsi_initialize_merge_fn+32/58>

    9:   8d 74 26 00               lea    0x0(%esi,1),%esi
Code;  c019a1ee <scsi_initialize_merge_fn+36/58>
    d:   f6 41 7a 02               testb  $0x2,0x7a(%ecx)

Code; c019a1f2 <scsi_initialize_merge_fn+3a/58>
11: 74 07 je 1a <_EIP+0x1a> c019a1fc
<scsi_initialize_merge_fn+44/58>
Code; c019a1f4 <scsi_initialize_merge_fn+3c/58>
13: b8 00 00 00 00 mov $0x0,%eax <0>Kernel panic:
Attempted to kill init!

It oopses during the detection of the SCSI devices. This machine is an all-SCSI, Pentium-classic, with a AIC-7770 controller.

Some help would be much appreciated, since this is definitely a show stopper around here..

Thanks in advance,

// Paulo Andre'

/~\ The ASCII
\ / Ribbon Campaign
X Against HTML
/ \ Email!

#1 lore raw
Quoted 4 lines · Paulo Andre

Hi Jens,

This is a very keen and motivated kernel hacker newbie here. That said, bear with me :)

Hmm, does this work? What SCSI devices do you have attached?

scsi/scsi_merge.c renamed from scsi/scsi_merge.c~ +1 -1
@@ -136,7 +136,7 @@
  			 * hardware have no practical limit.
 			 */
 			bounce_limit = BLK_BOUNCE_ANY;
-		else
+		else if (SHpnt->pci_dev)
 			bounce_limit = SHpnt->pci_dev->dma_mask;
 	} else if (SHpnt->unchecked_isa_dma)
 		bounce_limit = BLK_BOUNCE_ISA;
Signature · 1 line
Jens Axboe
#2 lore raw
In reply to Paulo Andre'

Hi again,

Quoted 6 lines · On 2002.02.20 11:10 Jens Axboe wrote:

Hmm, does this work? What SCSI devices do you have attached?

scsi/scsi_merge.c line 142

Quoted 8 lines
scsi/scsi_merge.c renamed from scsi/scsi_merge.c~ +1 -1
@@ -136,7 +136,7 @@
  			 * hardware have no practical limit.
 			 */
 			bounce_limit = BLK_BOUNCE_ANY;
-		else
+		else if (SHpnt->pci_dev)
 			bounce_limit = SHpnt->pci_dev->dma_mask;
 	} else if (SHpnt->unchecked_isa_dma)
 		bounce_limit = BLK_BOUNCE_ISA;

It sure does! My days of seeking for this trivial fix are now over, phew 8)
Thanks a lot Jens, keep up the great work.

// Paulo Andre'