Skip to contentSkip to conversation

rme9652 locks up my computer

DISCUSSION Robert Brückmann 2 participants 3 messages Feb 20, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

I have two hammerfalls in my computer, linked via Word Clock. When playing and recording at the same time with 48 channels, the computer sometimes gets xruns when cpu load gets bigger. This is not a problem, the recovery works very often, but if the xrun happens continously, the computer locks, and the only thing I can do is a hard reset. When the computer starts afetr that, and did the ext2-fschk, the alsa-driver-initialzation claims about too less memory for a buffer of one of the cards. But I've 512MB ram in my computer!? When rebooting the computer again, everything works fine again.

I'm using alsa version 0.9.10a, is there a known problem regarding the hard-locks?

Thanks,
Robert

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#1 lore raw
Quoted 5 lines · Robert Brückmann

Hi!

only thing I can do is a hard reset. When the computer starts afetr that, and did the ext2-fschk, the alsa-driver-initialzation claims about too less memory for a buffer of one of the cards. But I've 512MB ram in my computer!?

The too little memory problem, it too little contiguous memory in the part of the RAM that can be used by DMA.

Running fsck will fragment the memory to the state that the rme driver can't allocate enough ram. You can fix it by adding an entry into /etc/rc.d/rc.local or equivalent, but I can't remeber the exact line offhand.

- Steve

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#2 lore raw
Quoted 3 lines · Steve Harris

can't allocate enough ram. You can fix it by adding an entry into /etc/rc.d/rc.local or equivalent, but I can't remeber the exact line offhand.

Found it, it goes in /etc/rc.d/rc.sysinit, before the fsck part:

#
# Local mod: do this really early so that we can always grab the

# contiguous address space that we need.
#
action "Installing RME9652 memory buffers" modprobe snd-rme9652_mem
#
#
#

[ from an email from Paul D., on 2001-01-23
http://www.geocrawler.com/archives/3/251/2001/1/100/5016441/ ]

- Steve

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel