Skip to contentSkip to conversation

broken compile fixes for 2.5.5

PATCH New John Kim 1 participant 1 message Feb 26, 2002

lore
Share & tools
lore

John Kim

author
#0 lore raw

PATCH 1/1 broken compile fixes for 2.5.5

I found few places with missing or broken open and close comment. This patch applies cleanly to 2.5.5.

John Kim

arm/mach-arc/dma.c +1 -1
@@ -96,7 +96,7 @@
 	/* 10/1/1999 DAG - Presume whether there is an outstanding command? */
 	extern unsigned int fdc1772_fdc_int_done;
 
-	* Explicit! If the int done is 0 then 1 int to go */
+	/* Explicit! If the int done is 0 then 1 int to go */
 	return (fdc1772_fdc_int_done==0)?1:0;
 }
 
cris/drivers/lpslave/e100lpslavenet.c +1 -1
@@ -313,7 +313,7 @@
 		IO_STATE(R_PAR0_CONFIG, iautofd, noninv)    |
           /* Not used in reverse direction, don't care */
 		IO_STATE(R_PAR0_CONFIG, istrb,   noninv)    |
-          /* Not connected, don't care /
+          /* Not connected, don't care */
 		IO_STATE(R_PAR0_CONFIG, iinit,   noninv)    |
           /* perror is GND and reverse wants 0, noninv */
 		IO_STATE(R_PAR0_CONFIG, iperr,   noninv)    |
mips/kernel/smp.c +1 -1
@@ -156,7 +156,7 @@
 		sprintf(p->comm, "%s%d", "Idle", i);
 		init_tasks[i] = p;
 		p->processor = i;
-		p->cpus_runnable = 1 << i; /* we schedule the first task manually *
+		p->cpus_runnable = 1 << i; /* we schedule the first task manually */
 		del_from_runqueue(p);
 		unhash_process(p);
 		/* Attach to the address space of init_task. */
mips64/math-emu/cp1emu.c +1 -1
@@ -29,7 +29,7 @@
  * Notes:
  *  1) the IEEE754 library (-le) performs the actual arithmetic;
  *  2) if you know that you won't have an fpu, then you'll get much
- *     better performance by compiling with -msoft-float!  */
+ *     better performance by compiling with -msoft-float!
  *
  *  Nov 7, 2000
  *  Massive changes to integrate with Linux kernel.
char/rocket_int.h +1 -1
@@ -185,7 +185,7 @@
 
 /* Old clock prescale definition and baud rates associated with it */
 
-#define CLOCK_PRESC 0x19  */        /* mod 9 (divide by 10) prescale */
+#define CLOCK_PRESC 0x19          /* mod 9 (divide by 10) prescale */
 #define BRD50             4607
 #define BRD75             3071
 #define BRD110            2094
char/serial_tx3912.h +1 -1
@@ -24,7 +24,7 @@
 #define UART_TXOVERRUN_INT  3  /* transmit overrun error          (25, 15) */
 #define UART_EMPTY_INT      2  /* both trans/recv regs empty      (24, 14) */
 #define UART_DMAFULL_INT    1  /* DMA at end of buffer            (23, 13) */
-#define UART_DMAHALF_INT    0  /* DMA halfway through buffer */   (22, 12) */
+#define UART_DMAHALF_INT    0  /* DMA halfway through buffer      (22, 12) */
 
 #define UARTA_SHIFT        22
 #define UARTB_SHIFT        12
pci/cs4281.c +1 -1
@@ -268,7 +268,7 @@
 #define BA0_SERC1_SO1EN		(1<<0)	/* Primary Output Port Enable */
 
 #define BA0_SERC2		0x042c	/* Serial Port Configuration 2 */
-#define BA0_SERC2_SI1F(x)	(((x)&7)>>1) */ Primary Input Port Format */
+#define BA0_SERC2_SI1F(x)	(((x)&7)>>1) /* Primary Input Port Format */
 #define BA0_SERC2_AC97		(1<<1)
 #define BA0_SERC2_SI1EN		(1<<0)	/* Primary Input Port Enable */