Skip to contentSkip to conversation

pcmcia problems with IDE & cardbus

DISCUSSION dhinds 2 participants 3 messages Feb 27, 2002

lore
Share & tools
lore

dhinds

author
#0 lore raw
Quoted 2 lines · Andreas Roedl

Apart from your problem I finally found out that all dldwd_* stuff in 2.4.18 has been renamed to orinoco_*, so pcmcia-3.1.31 is not usable with 2.4.18...

Err what?

Why would the names of functions in the orinoco_cs driver affect the usability of the pcmcia-cs package on a particular kernel?

I think you're doing something wrong. The only circumstance I could imagine this making a difference is if you're trying to mix some of the orinoco modules from the kernel tree with other orinoco modules from the pcmcia-cs tree.

-- Dave

#1 lore raw

Hello!

Am Mittwoch, 27. Februar 2002 20:10 schrieb dhinds:

Quoted 6 lines
Quoted 3 lines · Andreas Roedl

Apart from your problem I finally found out that all dldwd_* stuff in 2.4.18 has been renamed to orinoco_*, so pcmcia-3.1.31 is not usable with 2.4.18...

Err what?

/lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_proc_dev_init /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_setup /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_shutdown /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_proc_dev_cleanup
/lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_reset /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_interrupt /lib/modules/2.4.18/pcmcia/orinoco_cs.o: insmod /lib/modules/2.4.18/pcmcia/orinoco_cs.o failed /lib/modules/2.4.18/pcmcia/orinoco_cs.o: insmod orinoco_cs failed

?

Andi

Signature · 5 lines
Web:   http://www.flood-net.de/
Mail:  [email protected]
Phone: +49-(0)-30-680577-44
Linux opens doors, not windows!
http://www.bundestux.de/   http://counter.li.org/
author
#2 lore raw
In reply to dhinds
Quoted 12 lines · Andreas Roedl

/lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_proc_dev_init /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_setup /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_shutdown /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_proc_dev_cleanup
/lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_reset /lib/modules/2.4.18/pcmcia/orinoco_cs.o: unresolved symbol dldwd_interrupt /lib/modules/2.4.18/pcmcia/orinoco_cs.o: insmod /lib/modules/2.4.18/pcmcia/orinoco_cs.o failed /lib/modules/2.4.18/pcmcia/orinoco_cs.o: insmod orinoco_cs failed

Quoted 1 line

?

Did you read my explanation?

You've somehow ended up loading the hermes module from the 2.4.18 kernel tree, and the orinoco_cs module from the pcmcia-cs package. "modprobe" is probably getting confused by having several modules with the same names, in different directories.

If you use just the pcmcia-cs modules, (or just the kernel modules), then everything should work fine on 2.4.18.

-- Dave